vserver 2.0 rc7
[linux-2.6.git] / drivers / scsi / sata_nv.c
1 /*
2  *  sata_nv.c - NVIDIA nForce SATA
3  *
4  *  Copyright 2004 NVIDIA Corp.  All rights reserved.
5  *  Copyright 2004 Andrew Chew
6  *
7  *  The contents of this file are subject to the Open
8  *  Software License version 1.1 that can be found at
9  *  http://www.opensource.org/licenses/osl-1.1.txt and is included herein
10  *  by reference.
11  *
12  *  Alternatively, the contents of this file may be used under the terms
13  *  of the GNU General Public License version 2 (the "GPL") as distributed
14  *  in the kernel source COPYING file, in which case the provisions of
15  *  the GPL are applicable instead of the above.  If you wish to allow
16  *  the use of your version of this file only under the terms of the
17  *  GPL and not to allow others to use your version of this file under
18  *  the OSL, indicate your decision by deleting the provisions above and
19  *  replace them with the notice and other provisions required by the GPL.
20  *  If you do not delete the provisions above, a recipient may use your
21  *  version of this file under either the OSL or the GPL.
22  *
23  *  0.06
24  *     - Added generic SATA support by using a pci_device_id that filters on
25  *       the IDE storage class code.
26  *
27  *  0.03
28  *     - Fixed a bug where the hotplug handlers for non-CK804/MCP04 were using
29  *       mmio_base, which is only set for the CK804/MCP04 case.
30  *
31  *  0.02
32  *     - Added support for CK804 SATA controller.
33  *
34  *  0.01
35  *     - Initial revision.
36  */
37
38 #include <linux/config.h>
39 #include <linux/kernel.h>
40 #include <linux/module.h>
41 #include <linux/pci.h>
42 #include <linux/init.h>
43 #include <linux/blkdev.h>
44 #include <linux/delay.h>
45 #include <linux/interrupt.h>
46 #include "scsi.h"
47 #include <scsi/scsi_host.h>
48 #include <linux/libata.h>
49
50 #define DRV_NAME                        "sata_nv"
51 #define DRV_VERSION                     "0.6"
52
53 #define NV_PORTS                        2
54 #define NV_PIO_MASK                     0x1f
55 #define NV_MWDMA_MASK                   0x07
56 #define NV_UDMA_MASK                    0x7f
57 #define NV_PORT0_SCR_REG_OFFSET         0x00
58 #define NV_PORT1_SCR_REG_OFFSET         0x40
59
60 #define NV_INT_STATUS                   0x10
61 #define NV_INT_STATUS_CK804             0x440
62 #define NV_INT_STATUS_PDEV_INT          0x01
63 #define NV_INT_STATUS_PDEV_PM           0x02
64 #define NV_INT_STATUS_PDEV_ADDED        0x04
65 #define NV_INT_STATUS_PDEV_REMOVED      0x08
66 #define NV_INT_STATUS_SDEV_INT          0x10
67 #define NV_INT_STATUS_SDEV_PM           0x20
68 #define NV_INT_STATUS_SDEV_ADDED        0x40
69 #define NV_INT_STATUS_SDEV_REMOVED      0x80
70 #define NV_INT_STATUS_PDEV_HOTPLUG      (NV_INT_STATUS_PDEV_ADDED | \
71                                         NV_INT_STATUS_PDEV_REMOVED)
72 #define NV_INT_STATUS_SDEV_HOTPLUG      (NV_INT_STATUS_SDEV_ADDED | \
73                                         NV_INT_STATUS_SDEV_REMOVED)
74 #define NV_INT_STATUS_HOTPLUG           (NV_INT_STATUS_PDEV_HOTPLUG | \
75                                         NV_INT_STATUS_SDEV_HOTPLUG)
76
77 #define NV_INT_ENABLE                   0x11
78 #define NV_INT_ENABLE_CK804             0x441
79 #define NV_INT_ENABLE_PDEV_MASK         0x01
80 #define NV_INT_ENABLE_PDEV_PM           0x02
81 #define NV_INT_ENABLE_PDEV_ADDED        0x04
82 #define NV_INT_ENABLE_PDEV_REMOVED      0x08
83 #define NV_INT_ENABLE_SDEV_MASK         0x10
84 #define NV_INT_ENABLE_SDEV_PM           0x20
85 #define NV_INT_ENABLE_SDEV_ADDED        0x40
86 #define NV_INT_ENABLE_SDEV_REMOVED      0x80
87 #define NV_INT_ENABLE_PDEV_HOTPLUG      (NV_INT_ENABLE_PDEV_ADDED | \
88                                         NV_INT_ENABLE_PDEV_REMOVED)
89 #define NV_INT_ENABLE_SDEV_HOTPLUG      (NV_INT_ENABLE_SDEV_ADDED | \
90                                         NV_INT_ENABLE_SDEV_REMOVED)
91 #define NV_INT_ENABLE_HOTPLUG           (NV_INT_ENABLE_PDEV_HOTPLUG | \
92                                         NV_INT_ENABLE_SDEV_HOTPLUG)
93
94 #define NV_INT_CONFIG                   0x12
95 #define NV_INT_CONFIG_METHD             0x01 // 0 = INT, 1 = SMI
96
97 // For PCI config register 20
98 #define NV_MCP_SATA_CFG_20              0x50
99 #define NV_MCP_SATA_CFG_20_SATA_SPACE_EN        0x04
100
101 static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent);
102 static irqreturn_t nv_interrupt (int irq, void *dev_instance,
103                                  struct pt_regs *regs);
104 static u32 nv_scr_read (struct ata_port *ap, unsigned int sc_reg);
105 static void nv_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val);
106 static void nv_host_stop (struct ata_host_set *host_set);
107 static void nv_enable_hotplug(struct ata_probe_ent *probe_ent);
108 static void nv_disable_hotplug(struct ata_host_set *host_set);
109 static void nv_check_hotplug(struct ata_host_set *host_set);
110 static void nv_enable_hotplug_ck804(struct ata_probe_ent *probe_ent);
111 static void nv_disable_hotplug_ck804(struct ata_host_set *host_set);
112 static void nv_check_hotplug_ck804(struct ata_host_set *host_set);
113
114 enum nv_host_type
115 {
116         GENERIC,
117         NFORCE2,
118         NFORCE3,
119         CK804
120 };
121
122 static struct pci_device_id nv_pci_tbl[] = {
123         { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2S_SATA,
124                 PCI_ANY_ID, PCI_ANY_ID, 0, 0, NFORCE2 },
125         { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA,
126                 PCI_ANY_ID, PCI_ANY_ID, 0, 0, NFORCE3 },
127         { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA2,
128                 PCI_ANY_ID, PCI_ANY_ID, 0, 0, NFORCE3 },
129         { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_SATA,
130                 PCI_ANY_ID, PCI_ANY_ID, 0, 0, CK804 },
131         { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_SATA2,
132                 PCI_ANY_ID, PCI_ANY_ID, 0, 0, CK804 },
133         { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SATA,
134                 PCI_ANY_ID, PCI_ANY_ID, 0, 0, CK804 },
135         { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SATA2,
136                 PCI_ANY_ID, PCI_ANY_ID, 0, 0, CK804 },
137         { PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID,
138                 PCI_ANY_ID, PCI_ANY_ID,
139                 PCI_CLASS_STORAGE_IDE<<8, 0xffff00, GENERIC },
140         { 0, } /* terminate list */
141 };
142
143 #define NV_HOST_FLAGS_SCR_MMIO  0x00000001
144
145 struct nv_host_desc
146 {
147         enum nv_host_type       host_type;
148         void                    (*enable_hotplug)(struct ata_probe_ent *probe_ent);
149         void                    (*disable_hotplug)(struct ata_host_set *host_set);
150         void                    (*check_hotplug)(struct ata_host_set *host_set);
151
152 };
153 static struct nv_host_desc nv_device_tbl[] = {
154         {
155                 .host_type      = GENERIC,
156                 .enable_hotplug = NULL,
157                 .disable_hotplug= NULL,
158                 .check_hotplug  = NULL,
159         },
160         {
161                 .host_type      = NFORCE2,
162                 .enable_hotplug = nv_enable_hotplug,
163                 .disable_hotplug= nv_disable_hotplug,
164                 .check_hotplug  = nv_check_hotplug,
165         },
166         {
167                 .host_type      = NFORCE3,
168                 .enable_hotplug = nv_enable_hotplug,
169                 .disable_hotplug= nv_disable_hotplug,
170                 .check_hotplug  = nv_check_hotplug,
171         },
172         {       .host_type      = CK804,
173                 .enable_hotplug = nv_enable_hotplug_ck804,
174                 .disable_hotplug= nv_disable_hotplug_ck804,
175                 .check_hotplug  = nv_check_hotplug_ck804,
176         },
177 };
178
179 struct nv_host
180 {
181         struct nv_host_desc     *host_desc;
182         unsigned long           host_flags;
183 };
184
185 static struct pci_driver nv_pci_driver = {
186         .name                   = DRV_NAME,
187         .id_table               = nv_pci_tbl,
188         .probe                  = nv_init_one,
189         .remove                 = ata_pci_remove_one,
190 };
191
192 static Scsi_Host_Template nv_sht = {
193         .module                 = THIS_MODULE,
194         .name                   = DRV_NAME,
195         .ioctl                  = ata_scsi_ioctl,
196         .queuecommand           = ata_scsi_queuecmd,
197         .eh_strategy_handler    = ata_scsi_error,
198         .can_queue              = ATA_DEF_QUEUE,
199         .this_id                = ATA_SHT_THIS_ID,
200         .sg_tablesize           = LIBATA_MAX_PRD,
201         .max_sectors            = ATA_MAX_SECTORS,
202         .cmd_per_lun            = ATA_SHT_CMD_PER_LUN,
203         .emulated               = ATA_SHT_EMULATED,
204         .use_clustering         = ATA_SHT_USE_CLUSTERING,
205         .proc_name              = DRV_NAME,
206         .dma_boundary           = ATA_DMA_BOUNDARY,
207         .slave_configure        = ata_scsi_slave_config,
208         .bios_param             = ata_std_bios_param,
209         .ordered_flush          = 1,
210 };
211
212 static struct ata_port_operations nv_ops = {
213         .port_disable           = ata_port_disable,
214         .tf_load                = ata_tf_load,
215         .tf_read                = ata_tf_read,
216         .exec_command           = ata_exec_command,
217         .check_status           = ata_check_status,
218         .dev_select             = ata_std_dev_select,
219         .phy_reset              = sata_phy_reset,
220         .bmdma_setup            = ata_bmdma_setup,
221         .bmdma_start            = ata_bmdma_start,
222         .bmdma_stop             = ata_bmdma_stop,
223         .bmdma_status           = ata_bmdma_status,
224         .qc_prep                = ata_qc_prep,
225         .qc_issue               = ata_qc_issue_prot,
226         .eng_timeout            = ata_eng_timeout,
227         .irq_handler            = nv_interrupt,
228         .irq_clear              = ata_bmdma_irq_clear,
229         .scr_read               = nv_scr_read,
230         .scr_write              = nv_scr_write,
231         .port_start             = ata_port_start,
232         .port_stop              = ata_port_stop,
233         .host_stop              = nv_host_stop,
234 };
235
236 /* FIXME: The hardware provides the necessary SATA PHY controls
237  * to support ATA_FLAG_SATA_RESET.  However, it is currently
238  * necessary to disable that flag, to solve misdetection problems.
239  * See http://bugme.osdl.org/show_bug.cgi?id=3352 for more info.
240  *
241  * This problem really needs to be investigated further.  But in the
242  * meantime, we avoid ATA_FLAG_SATA_RESET to get people working.
243  */
244 static struct ata_port_info nv_port_info = {
245         .sht            = &nv_sht,
246         .host_flags     = ATA_FLAG_SATA |
247                           /* ATA_FLAG_SATA_RESET | */
248                           ATA_FLAG_SRST |
249                           ATA_FLAG_NO_LEGACY,
250         .pio_mask       = NV_PIO_MASK,
251         .mwdma_mask     = NV_MWDMA_MASK,
252         .udma_mask      = NV_UDMA_MASK,
253         .port_ops       = &nv_ops,
254 };
255
256 MODULE_AUTHOR("NVIDIA");
257 MODULE_DESCRIPTION("low-level driver for NVIDIA nForce SATA controller");
258 MODULE_LICENSE("GPL");
259 MODULE_DEVICE_TABLE(pci, nv_pci_tbl);
260 MODULE_VERSION(DRV_VERSION);
261
262 static irqreturn_t nv_interrupt (int irq, void *dev_instance,
263                                  struct pt_regs *regs)
264 {
265         struct ata_host_set *host_set = dev_instance;
266         struct nv_host *host = host_set->private_data;
267         unsigned int i;
268         unsigned int handled = 0;
269         unsigned long flags;
270
271         spin_lock_irqsave(&host_set->lock, flags);
272
273         for (i = 0; i < host_set->n_ports; i++) {
274                 struct ata_port *ap;
275
276                 ap = host_set->ports[i];
277                 if (ap && (!(ap->flags & ATA_FLAG_PORT_DISABLED))) {
278                         struct ata_queued_cmd *qc;
279
280                         qc = ata_qc_from_tag(ap, ap->active_tag);
281                         if (qc && (!(qc->tf.ctl & ATA_NIEN)))
282                                 handled += ata_host_intr(ap, qc);
283                 }
284
285         }
286
287         if (host->host_desc->check_hotplug)
288                 host->host_desc->check_hotplug(host_set);
289
290         spin_unlock_irqrestore(&host_set->lock, flags);
291
292         return IRQ_RETVAL(handled);
293 }
294
295 static u32 nv_scr_read (struct ata_port *ap, unsigned int sc_reg)
296 {
297         struct ata_host_set *host_set = ap->host_set;
298         struct nv_host *host = host_set->private_data;
299
300         if (sc_reg > SCR_CONTROL)
301                 return 0xffffffffU;
302
303         if (host->host_flags & NV_HOST_FLAGS_SCR_MMIO)
304                 return readl((void*)ap->ioaddr.scr_addr + (sc_reg * 4));
305         else
306                 return inl(ap->ioaddr.scr_addr + (sc_reg * 4));
307 }
308
309 static void nv_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val)
310 {
311         struct ata_host_set *host_set = ap->host_set;
312         struct nv_host *host = host_set->private_data;
313
314         if (sc_reg > SCR_CONTROL)
315                 return;
316
317         if (host->host_flags & NV_HOST_FLAGS_SCR_MMIO)
318                 writel(val, (void*)ap->ioaddr.scr_addr + (sc_reg * 4));
319         else
320                 outl(val, ap->ioaddr.scr_addr + (sc_reg * 4));
321 }
322
323 static void nv_host_stop (struct ata_host_set *host_set)
324 {
325         struct nv_host *host = host_set->private_data;
326
327         // Disable hotplug event interrupts.
328         if (host->host_desc->disable_hotplug)
329                 host->host_desc->disable_hotplug(host_set);
330
331         kfree(host);
332
333         ata_host_stop(host_set);
334 }
335
336 static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
337 {
338         static int printed_version = 0;
339         struct nv_host *host;
340         struct ata_port_info *ppi;
341         struct ata_probe_ent *probe_ent;
342         int pci_dev_busy = 0;
343         int rc;
344         u32 bar;
345
346         // Make sure this is a SATA controller by counting the number of bars
347         // (NVIDIA SATA controllers will always have six bars).  Otherwise,
348         // it's an IDE controller and we ignore it.
349         for (bar=0; bar<6; bar++)
350                 if (pci_resource_start(pdev, bar) == 0)
351                         return -ENODEV;
352
353         if (!printed_version++)
354                 printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
355
356         rc = pci_enable_device(pdev);
357         if (rc)
358                 goto err_out;
359
360         rc = pci_request_regions(pdev, DRV_NAME);
361         if (rc) {
362                 pci_dev_busy = 1;
363                 goto err_out_disable;
364         }
365
366         rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
367         if (rc)
368                 goto err_out_regions;
369         rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
370         if (rc)
371                 goto err_out_regions;
372
373         rc = -ENOMEM;
374
375         ppi = &nv_port_info;
376         probe_ent = ata_pci_init_native_mode(pdev, &ppi);
377         if (!probe_ent)
378                 goto err_out_regions;
379
380         host = kmalloc(sizeof(struct nv_host), GFP_KERNEL);
381         if (!host)
382                 goto err_out_free_ent;
383
384         memset(host, 0, sizeof(struct nv_host));
385         host->host_desc = &nv_device_tbl[ent->driver_data];
386
387         probe_ent->private_data = host;
388
389         if (pci_resource_flags(pdev, 5) & IORESOURCE_MEM)
390                 host->host_flags |= NV_HOST_FLAGS_SCR_MMIO;
391
392         if (host->host_flags & NV_HOST_FLAGS_SCR_MMIO) {
393                 unsigned long base;
394
395                 probe_ent->mmio_base = ioremap(pci_resource_start(pdev, 5),
396                                 pci_resource_len(pdev, 5));
397                 if (probe_ent->mmio_base == NULL) {
398                         rc = -EIO;
399                         goto err_out_free_host;
400                 }
401
402                 base = (unsigned long)probe_ent->mmio_base;
403
404                 probe_ent->port[0].scr_addr =
405                         base + NV_PORT0_SCR_REG_OFFSET;
406                 probe_ent->port[1].scr_addr =
407                         base + NV_PORT1_SCR_REG_OFFSET;
408         } else {
409
410                 probe_ent->port[0].scr_addr =
411                         pci_resource_start(pdev, 5) | NV_PORT0_SCR_REG_OFFSET;
412                 probe_ent->port[1].scr_addr =
413                         pci_resource_start(pdev, 5) | NV_PORT1_SCR_REG_OFFSET;
414         }
415
416         pci_set_master(pdev);
417
418         rc = ata_device_add(probe_ent);
419         if (rc != NV_PORTS)
420                 goto err_out_iounmap;
421
422         // Enable hotplug event interrupts.
423         if (host->host_desc->enable_hotplug)
424                 host->host_desc->enable_hotplug(probe_ent);
425
426         kfree(probe_ent);
427
428         return 0;
429
430 err_out_iounmap:
431         if (host->host_flags & NV_HOST_FLAGS_SCR_MMIO)
432                 iounmap(probe_ent->mmio_base);
433 err_out_free_host:
434         kfree(host);
435 err_out_free_ent:
436         kfree(probe_ent);
437 err_out_regions:
438         pci_release_regions(pdev);
439 err_out_disable:
440         if (!pci_dev_busy)
441                 pci_disable_device(pdev);
442 err_out:
443         return rc;
444 }
445
446 static void nv_enable_hotplug(struct ata_probe_ent *probe_ent)
447 {
448         u8 intr_mask;
449
450         outb(NV_INT_STATUS_HOTPLUG,
451                 probe_ent->port[0].scr_addr + NV_INT_STATUS);
452
453         intr_mask = inb(probe_ent->port[0].scr_addr + NV_INT_ENABLE);
454         intr_mask |= NV_INT_ENABLE_HOTPLUG;
455
456         outb(intr_mask, probe_ent->port[0].scr_addr + NV_INT_ENABLE);
457 }
458
459 static void nv_disable_hotplug(struct ata_host_set *host_set)
460 {
461         u8 intr_mask;
462
463         intr_mask = inb(host_set->ports[0]->ioaddr.scr_addr + NV_INT_ENABLE);
464
465         intr_mask &= ~(NV_INT_ENABLE_HOTPLUG);
466
467         outb(intr_mask, host_set->ports[0]->ioaddr.scr_addr + NV_INT_ENABLE);
468 }
469
470 static void nv_check_hotplug(struct ata_host_set *host_set)
471 {
472         u8 intr_status;
473
474         intr_status = inb(host_set->ports[0]->ioaddr.scr_addr + NV_INT_STATUS);
475
476         // Clear interrupt status.
477         outb(0xff, host_set->ports[0]->ioaddr.scr_addr + NV_INT_STATUS);
478
479         if (intr_status & NV_INT_STATUS_HOTPLUG) {
480                 if (intr_status & NV_INT_STATUS_PDEV_ADDED)
481                         printk(KERN_WARNING "nv_sata: "
482                                 "Primary device added\n");
483
484                 if (intr_status & NV_INT_STATUS_PDEV_REMOVED)
485                         printk(KERN_WARNING "nv_sata: "
486                                 "Primary device removed\n");
487
488                 if (intr_status & NV_INT_STATUS_SDEV_ADDED)
489                         printk(KERN_WARNING "nv_sata: "
490                                 "Secondary device added\n");
491
492                 if (intr_status & NV_INT_STATUS_SDEV_REMOVED)
493                         printk(KERN_WARNING "nv_sata: "
494                                 "Secondary device removed\n");
495         }
496 }
497
498 static void nv_enable_hotplug_ck804(struct ata_probe_ent *probe_ent)
499 {
500         struct pci_dev *pdev = to_pci_dev(probe_ent->dev);
501         u8 intr_mask;
502         u8 regval;
503
504         pci_read_config_byte(pdev, NV_MCP_SATA_CFG_20, &regval);
505         regval |= NV_MCP_SATA_CFG_20_SATA_SPACE_EN;
506         pci_write_config_byte(pdev, NV_MCP_SATA_CFG_20, regval);
507
508         writeb(NV_INT_STATUS_HOTPLUG, probe_ent->mmio_base + NV_INT_STATUS_CK804);
509
510         intr_mask = readb(probe_ent->mmio_base + NV_INT_ENABLE_CK804);
511         intr_mask |= NV_INT_ENABLE_HOTPLUG;
512
513         writeb(intr_mask, probe_ent->mmio_base + NV_INT_ENABLE_CK804);
514 }
515
516 static void nv_disable_hotplug_ck804(struct ata_host_set *host_set)
517 {
518         struct pci_dev *pdev = to_pci_dev(host_set->dev);
519         u8 intr_mask;
520         u8 regval;
521
522         intr_mask = readb(host_set->mmio_base + NV_INT_ENABLE_CK804);
523
524         intr_mask &= ~(NV_INT_ENABLE_HOTPLUG);
525
526         writeb(intr_mask, host_set->mmio_base + NV_INT_ENABLE_CK804);
527
528         pci_read_config_byte(pdev, NV_MCP_SATA_CFG_20, &regval);
529         regval &= ~NV_MCP_SATA_CFG_20_SATA_SPACE_EN;
530         pci_write_config_byte(pdev, NV_MCP_SATA_CFG_20, regval);
531 }
532
533 static void nv_check_hotplug_ck804(struct ata_host_set *host_set)
534 {
535         u8 intr_status;
536
537         intr_status = readb(host_set->mmio_base + NV_INT_STATUS_CK804);
538
539         // Clear interrupt status.
540         writeb(0xff, host_set->mmio_base + NV_INT_STATUS_CK804);
541
542         if (intr_status & NV_INT_STATUS_HOTPLUG) {
543                 if (intr_status & NV_INT_STATUS_PDEV_ADDED)
544                         printk(KERN_WARNING "nv_sata: "
545                                 "Primary device added\n");
546
547                 if (intr_status & NV_INT_STATUS_PDEV_REMOVED)
548                         printk(KERN_WARNING "nv_sata: "
549                                 "Primary device removed\n");
550
551                 if (intr_status & NV_INT_STATUS_SDEV_ADDED)
552                         printk(KERN_WARNING "nv_sata: "
553                                 "Secondary device added\n");
554
555                 if (intr_status & NV_INT_STATUS_SDEV_REMOVED)
556                         printk(KERN_WARNING "nv_sata: "
557                                 "Secondary device removed\n");
558         }
559 }
560
561 static int __init nv_init(void)
562 {
563         return pci_module_init(&nv_pci_driver);
564 }
565
566 static void __exit nv_exit(void)
567 {
568         pci_unregister_driver(&nv_pci_driver);
569 }
570
571 module_init(nv_init);
572 module_exit(nv_exit);