ftp://ftp.kernel.org/pub/linux/kernel/v2.6/linux-2.6.6.tar.bz2
[linux-2.6.git] / drivers / usb / Kconfig
1 #
2 # USB device configuration
3 #
4
5 menu "USB support"
6
7 # ARM SA1111 chips have a non-PCI based "OHCI-compatible" USB host interface.
8 config USB
9         tristate "Support for Host-side USB"
10         depends on PCI || SA1111 || ARCH_OMAP1510 || ARCH_OMAP1610
11         ---help---
12           Universal Serial Bus (USB) is a specification for a serial bus
13           subsystem which offers higher speeds and more features than the
14           traditional PC serial port.  The bus supplies power to peripherals
15           and allows for hot swapping.  Up to 127 USB peripherals can be
16           connected to a single USB host in a tree structure.
17           
18           The USB host is the root of the tree, the peripherals are the
19           leaves and the inner nodes are special USB devices called hubs.
20           Most PCs now have USB host ports, used to connect peripherals
21           such as scanners, keyboards, mice, modems, cameras, disks,
22           flash memory, network links, and printers to the PC.
23
24           Say Y here if your computer has a host-side USB port and you want
25           to use USB devices.  You then need to say Y to at least one of the
26           Host Controller Driver (HCD) options below.  Choose a USB 1.1
27           controller, such as "UHCI HCD support" or "OHCI HCD support",
28           and "EHCI HCD (USB 2.0) support" except for older systems that
29           do not have USB 2.0 support.  It doesn't normally hurt to select
30           them all if you are not certain.
31
32           If your system has a device-side USB port, used in the peripheral
33           side of the USB protocol, see the "USB Gadget" framework instead.
34
35           After choosing your HCD, then select drivers for the USB peripherals
36           you'll be using.  You may want to check out the information provided
37           in <file:Documentation/usb/> and especially the links given in
38           <file:Documentation/usb/usb-help.txt>.
39
40           To compile this driver as a module, choose M here: the
41           module will be called usbcore.
42
43 source "drivers/usb/core/Kconfig"
44
45 source "drivers/usb/host/Kconfig"
46
47 source "drivers/usb/class/Kconfig"
48
49 source "drivers/usb/storage/Kconfig"
50
51 source "drivers/usb/input/Kconfig"
52
53 source "drivers/usb/image/Kconfig"
54
55 source "drivers/usb/media/Kconfig"
56
57 source "drivers/usb/net/Kconfig"
58
59 comment "USB port drivers"
60         depends on USB
61
62 config USB_USS720
63         tristate "USS720 parport driver"
64         depends on USB && PARPORT
65         ---help---
66           This driver is for USB parallel port adapters that use the Lucent
67           Technologies USS-720 chip. These cables are plugged into your USB
68           port and provide USB compatibility to peripherals designed with
69           parallel port interfaces.
70
71           The chip has two modes: automatic mode and manual mode. In automatic
72           mode, it looks to the computer like a standard USB printer. Only
73           printers may be connected to the USS-720 in this mode. The generic
74           USB printer driver ("USB Printer support", above) may be used in
75           that mode, and you can say N here if you want to use the chip only
76           in this mode.
77
78           Manual mode is not limited to printers, any parallel port
79           device should work. This driver utilizes manual mode.
80           Note however that some operations are three orders of magnitude
81           slower than on a PCI/ISA Parallel Port, so timing critical
82           applications might not work.
83
84           Say Y here if you own an USS-720 USB->Parport cable and intend to
85           connect anything other than a printer to it.
86
87           To compile this driver as a module, choose M here: the
88           module will be called uss720.
89
90 source "drivers/usb/serial/Kconfig"
91
92 source "drivers/usb/misc/Kconfig"
93
94 source "drivers/usb/gadget/Kconfig"
95
96 endmenu
97