drivers/usb/host/uhci-hub.c

   1 /*
   2  * Universal Host Controller Interface driver for USB.
   3  *
   4  * Maintainer: Alan Stern <stern@rowland.harvard.edu>
   5  *
   6  * (C) Copyright 1999 Linus Torvalds
   7  * (C) Copyright 1999-2002 Johannes Erdfelt, johannes@erdfelt.com
   8  * (C) Copyright 1999 Randy Dunlap
   9  * (C) Copyright 1999 Georg Acher, acher@in.tum.de
  10  * (C) Copyright 1999 Deti Fliegl, deti@fliegl.de
  11  * (C) Copyright 1999 Thomas Sailer, sailer@ife.ee.ethz.ch
  12  * (C) Copyright 2004 Alan Stern, stern@rowland.harvard.edu
  13  */
  14
  15 static __u8 root_hub_hub_des[] =
  16 {
  17         0x09,                   /*  __u8  bLength; */
  18         0x29,                   /*  __u8  bDescriptorType; Hub-descriptor */
  19         0x02,                   /*  __u8  bNbrPorts; */
  20         0x0a,                   /* __u16  wHubCharacteristics; */
  21         0x00,                   /*   (per-port OC, no power switching) */
  22         0x01,                   /*  __u8  bPwrOn2pwrGood; 2ms */
  23         0x00,                   /*  __u8  bHubContrCurrent; 0 mA */
  24         0x00,                   /*  __u8  DeviceRemovable; *** 7 Ports max *** */
  25         0xff                    /*  __u8  PortPwrCtrlMask; *** 7 ports max *** */
  26 };
  27
  28 #define UHCI_RH_MAXCHILD        7
  29
  30 /* must write as zeroes */
  31 #define WZ_BITS         (USBPORTSC_RES2 | USBPORTSC_RES3 | USBPORTSC_RES4)
  32
  33 /* status change bits:  nonzero writes will clear */
  34 #define RWC_BITS        (USBPORTSC_OCC | USBPORTSC_PEC | USBPORTSC_CSC)
  35
  36 static int uhci_hub_status_data(struct usb_hcd *hcd, char *buf)
  37 {
  38         struct uhci_hcd *uhci = hcd_to_uhci(hcd);
  39         int port;
  40
  41         *buf = 0;
  42         for (port = 0; port < uhci->rh_numports; ++port) {
  43                 if ((inw(uhci->io_addr + USBPORTSC1 + port * 2) & RWC_BITS) ||
  44                                 test_bit(port, &uhci->port_c_suspend))
  45                         *buf |= (1 << (port + 1));
  46         }
  47         if (*buf && uhci->state == UHCI_SUSPENDED)
  48                 uhci->resume_detect = 1;
  49         return !!*buf;
  50 }
  51
  52 #define OK(x)                   len = (x); break
  53
  54 #define CLR_RH_PORTSTAT(x) \
  55         status = inw(port_addr); \
  56         status &= ~(RWC_BITS|WZ_BITS); \
  57         status &= ~(x); \
  58         status |= RWC_BITS & (x); \
  59         outw(status, port_addr)
  60
  61 #define SET_RH_PORTSTAT(x) \
  62         status = inw(port_addr); \
  63         status |= (x); \
  64         status &= ~(RWC_BITS|WZ_BITS); \
  65         outw(status, port_addr)
  66
  67 /* UHCI controllers don't automatically stop resume signalling after 20 msec,
  68  * so we have to poll and check timeouts in order to take care of it.
  69  */
  70 static void uhci_finish_suspend(struct uhci_hcd *uhci, int port,
  71                 unsigned long port_addr)
  72 {
  73         int status;
  74
  75         if (test_bit(port, &uhci->suspended_ports)) {
  76                 CLR_RH_PORTSTAT(USBPORTSC_SUSP | USBPORTSC_RD);
  77                 clear_bit(port, &uhci->suspended_ports);
  78                 clear_bit(port, &uhci->resuming_ports);
  79                 set_bit(port, &uhci->port_c_suspend);
  80
  81                 /* The controller won't actually turn off the RD bit until
  82                  * it has had a chance to send a low-speed EOP sequence,
  83                  * which takes 3 bit times (= 2 microseconds).  We'll delay
  84                  * slightly longer for good luck. */
  85                 udelay(4);
  86         }
  87 }
  88
  89 static void uhci_check_ports(struct uhci_hcd *uhci)
  90 {
  91         unsigned int port;
  92         unsigned long port_addr;
  93         int status;
  94
  95         for (port = 0; port < uhci->rh_numports; ++port) {
  96                 port_addr = uhci->io_addr + USBPORTSC1 + 2 * port;
  97                 status = inw(port_addr);
  98                 if (unlikely(status & USBPORTSC_PR)) {
  99                         if (time_after_eq(jiffies, uhci->ports_timeout)) {
 100                                 CLR_RH_PORTSTAT(USBPORTSC_PR);
 101                                 udelay(10);
 102
 103                                 /* If the port was enabled before, turning
 104                                  * reset on caused a port enable change.
 105                                  * Turning reset off causes a port connect
 106                                  * status change.  Clear these changes. */
 107                                 CLR_RH_PORTSTAT(USBPORTSC_CSC | USBPORTSC_PEC);
 108                                 SET_RH_PORTSTAT(USBPORTSC_PE);
 109                         }
 110                 }
 111                 if (unlikely(status & USBPORTSC_RD)) {
 112                         if (!test_bit(port, &uhci->resuming_ports)) {
 113
 114                                 /* Port received a wakeup request */
 115                                 set_bit(port, &uhci->resuming_ports);
 116                                 uhci->ports_timeout = jiffies +
 117                                                 msecs_to_jiffies(20);
 118                         } else if (time_after_eq(jiffies,
 119                                                 uhci->ports_timeout)) {
 120                                 uhci_finish_suspend(uhci, port, port_addr);
 121                         }
 122                 }
 123         }
 124 }
 125
 126 /* size of returned buffer is part of USB spec */
 127 static int uhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 128                         u16 wIndex, char *buf, u16 wLength)
 129 {
 130         struct uhci_hcd *uhci = hcd_to_uhci(hcd);
 131         int status, lstatus, retval = 0, len = 0;
 132         unsigned int port = wIndex - 1;
 133         unsigned long port_addr = uhci->io_addr + USBPORTSC1 + 2 * port;
 134         u16 wPortChange, wPortStatus;
 135         unsigned long flags;
 136
 137         spin_lock_irqsave(&uhci->lock, flags);
 138         switch (typeReq) {
 139
 140         case GetHubStatus:
 141                 *(__le32 *)buf = cpu_to_le32(0);
 142                 OK(4);          /* hub power */
 143         case GetPortStatus:
 144                 if (port >= uhci->rh_numports)
 145                         goto err;
 146
 147                 uhci_check_ports(uhci);
 148                 status = inw(port_addr);
 149
 150                 /* Intel controllers report the OverCurrent bit active on.
 151                  * VIA controllers report it active off, so we'll adjust the
 152                  * bit value.  (It's not standardized in the UHCI spec.)
 153                  */
 154                 if (to_pci_dev(hcd->self.controller)->vendor ==
 155                                 PCI_VENDOR_ID_VIA)
 156                         status ^= USBPORTSC_OC;
 157
 158                 /* UHCI doesn't support C_RESET (always false) */
 159                 wPortChange = lstatus = 0;
 160                 if (status & USBPORTSC_CSC)
 161                         wPortChange |= USB_PORT_STAT_C_CONNECTION;
 162                 if (status & USBPORTSC_PEC)
 163                         wPortChange |= USB_PORT_STAT_C_ENABLE;
 164                 if (status & USBPORTSC_OCC)
 165                         wPortChange |= USB_PORT_STAT_C_OVERCURRENT;
 166
 167                 if (test_bit(port, &uhci->port_c_suspend)) {
 168                         wPortChange |= USB_PORT_STAT_C_SUSPEND;
 169                         lstatus |= 1;
 170                 }
 171                 if (test_bit(port, &uhci->suspended_ports))
 172                         lstatus |= 2;
 173                 if (test_bit(port, &uhci->resuming_ports))
 174                         lstatus |= 4;
 175
 176                 /* UHCI has no power switching (always on) */
 177                 wPortStatus = USB_PORT_STAT_POWER;
 178                 if (status & USBPORTSC_CCS)
 179                         wPortStatus |= USB_PORT_STAT_CONNECTION;
 180                 if (status & USBPORTSC_PE) {
 181                         wPortStatus |= USB_PORT_STAT_ENABLE;
 182                         if (status & (USBPORTSC_SUSP | USBPORTSC_RD))
 183                                 wPortStatus |= USB_PORT_STAT_SUSPEND;
 184                 }
 185                 if (status & USBPORTSC_OC)
 186                         wPortStatus |= USB_PORT_STAT_OVERCURRENT;
 187                 if (status & USBPORTSC_PR)
 188                         wPortStatus |= USB_PORT_STAT_RESET;
 189                 if (status & USBPORTSC_LSDA)
 190                         wPortStatus |= USB_PORT_STAT_LOW_SPEED;
 191
 192                 if (wPortChange)
 193                         dev_dbg(uhci_dev(uhci), "port %d portsc %04x,%02x\n",
 194                                         wIndex, status, lstatus);
 195
 196                 *(__le16 *)buf = cpu_to_le16(wPortStatus);
 197                 *(__le16 *)(buf + 2) = cpu_to_le16(wPortChange);
 198                 OK(4);
 199         case SetHubFeature:             /* We don't implement these */
 200         case ClearHubFeature:
 201                 switch (wValue) {
 202                 case C_HUB_OVER_CURRENT:
 203                 case C_HUB_LOCAL_POWER:
 204                         OK(0);
 205                 default:
 206                         goto err;
 207                 }
 208                 break;
 209         case SetPortFeature:
 210                 if (port >= uhci->rh_numports)
 211                         goto err;
 212
 213                 switch (wValue) {
 214                 case USB_PORT_FEAT_SUSPEND:
 215                         set_bit(port, &uhci->suspended_ports);
 216                         SET_RH_PORTSTAT(USBPORTSC_SUSP);
 217                         OK(0);
 218                 case USB_PORT_FEAT_RESET:
 219                         SET_RH_PORTSTAT(USBPORTSC_PR);
 220
 221                         /* Reset terminates Resume signalling */
 222                         uhci_finish_suspend(uhci, port, port_addr);
 223
 224                         /* USB v2.0 7.1.7.5 */
 225                         uhci->ports_timeout = jiffies + msecs_to_jiffies(50);
 226                         OK(0);
 227                 case USB_PORT_FEAT_POWER:
 228                         /* UHCI has no power switching */
 229                         OK(0);
 230                 default:
 231                         goto err;
 232                 }
 233                 break;
 234         case ClearPortFeature:
 235                 if (port >= uhci->rh_numports)
 236                         goto err;
 237
 238                 switch (wValue) {
 239                 case USB_PORT_FEAT_ENABLE:
 240                         CLR_RH_PORTSTAT(USBPORTSC_PE);
 241
 242                         /* Disable terminates Resume signalling */
 243                         uhci_finish_suspend(uhci, port, port_addr);
 244                         OK(0);
 245                 case USB_PORT_FEAT_C_ENABLE:
 246                         CLR_RH_PORTSTAT(USBPORTSC_PEC);
 247                         OK(0);
 248                 case USB_PORT_FEAT_SUSPEND:
 249                         if (test_bit(port, &uhci->suspended_ports) &&
 250                                         !test_and_set_bit(port,
 251                                                 &uhci->resuming_ports)) {
 252                                 SET_RH_PORTSTAT(USBPORTSC_RD);
 253
 254                                 /* The controller won't allow RD to be set
 255                                  * if the port is disabled.  When this happens
 256                                  * just skip the Resume signalling.
 257                                  */
 258                                 if (!(inw(port_addr) & USBPORTSC_RD))
 259                                         uhci_finish_suspend(uhci, port,
 260                                                         port_addr);
 261                                 else
 262                                         /* USB v2.0 7.1.7.7 */
 263                                         uhci->ports_timeout = jiffies +
 264                                                 msecs_to_jiffies(20);
 265                         }
 266                         OK(0);
 267                 case USB_PORT_FEAT_C_SUSPEND:
 268                         clear_bit(port, &uhci->port_c_suspend);
 269                         OK(0);
 270                 case USB_PORT_FEAT_POWER:
 271                         /* UHCI has no power switching */
 272                         goto err;
 273                 case USB_PORT_FEAT_C_CONNECTION:
 274                         CLR_RH_PORTSTAT(USBPORTSC_CSC);
 275                         OK(0);
 276                 case USB_PORT_FEAT_C_OVER_CURRENT:
 277                         CLR_RH_PORTSTAT(USBPORTSC_OCC);
 278                         OK(0);
 279                 case USB_PORT_FEAT_C_RESET:
 280                         /* this driver won't report these */
 281                         OK(0);
 282                 default:
 283                         goto err;
 284                 }
 285                 break;
 286         case GetHubDescriptor:
 287                 len = min_t(unsigned int, sizeof(root_hub_hub_des), wLength);
 288                 memcpy(buf, root_hub_hub_des, len);
 289                 if (len > 2)
 290                         buf[2] = uhci->rh_numports;
 291                 OK(len);
 292         default:
 293 err:
 294                 retval = -EPIPE;
 295         }
 296         spin_unlock_irqrestore(&uhci->lock, flags);
 297
 298         return retval;
 299 }