drivers/usb/net/zaurus.c

   1 /*
   2  * Copyright (C) 2002 Pavel Machek <pavel@ucw.cz>
   3  * Copyright (C) 2002-2005 by David Brownell
   4  *
   5  * This program is free software; you can redistribute it and/or modify
   6  * it under the terms of the GNU General Public License as published by
   7  * the Free Software Foundation; either version 2 of the License, or
   8  * (at your option) any later version.
   9  *
  10  * This program is distributed in the hope that it will be useful,
  11  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  12  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  13  * GNU General Public License for more details.
  14  *
  15  * You should have received a copy of the GNU General Public License
  16  * along with this program; if not, write to the Free Software
  17  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  18  */
  19
  20 // #define      DEBUG                   // error path messages, extra info
  21 // #define      VERBOSE                 // more; success messages
  22
  23 #include <linux/module.h>
  24 #include <linux/sched.h>
  25 #include <linux/init.h>
  26 #include <linux/netdevice.h>
  27 #include <linux/ethtool.h>
  28 #include <linux/workqueue.h>
  29 #include <linux/mii.h>
  30 #include <linux/crc32.h>
  31 #include <linux/usb.h>
  32 #include <linux/usb/cdc.h>
  33
  34 #include "usbnet.h"
  35
  36
  37 /*
  38  * All known Zaurii lie about their standards conformance.  At least
  39  * the earliest SA-1100 models lie by saying they support CDC Ethernet.
  40  * Some later models (especially PXA-25x and PXA-27x based ones) lie
  41  * and say they support CDC MDLM (for access to cell phone modems).
  42  *
  43  * There are non-Zaurus products that use these same protocols too.
  44  *
  45  * The annoying thing is that at the same time Sharp was developing
  46  * that annoying standards-breaking software, the Linux community had
  47  * a simple "CDC Subset" working reliably on the same SA-1100 hardware.
  48  * That is, the same functionality but not violating standards.
  49  *
  50  * The CDC Ethernet nonconformance points are troublesome to hosts
  51  * with a true CDC Ethernet implementation:
  52  *   - Framing appends a CRC, which the spec says drivers "must not" do;
  53  *   - Transfers data in altsetting zero, instead of altsetting 1;
  54  *   - All these peripherals use the same ethernet address.
  55  *
  56  * The CDC MDLM nonconformance is less immediately troublesome, since all
  57  * MDLM implementations are quasi-proprietary anyway.
  58  */
  59
  60 static struct sk_buff *
  61 zaurus_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags)
  62 {
  63         int                     padlen;
  64         struct sk_buff          *skb2;
  65
  66         padlen = 2;
  67         if (!skb_cloned(skb)) {
  68                 int     tailroom = skb_tailroom(skb);
  69                 if ((padlen + 4) <= tailroom)
  70                         goto done;
  71         }
  72         skb2 = skb_copy_expand(skb, 0, 4 + padlen, flags);
  73         dev_kfree_skb_any(skb);
  74         skb = skb2;
  75         if (skb) {
  76                 u32             fcs;
  77 done:
  78                 fcs = crc32_le(~0, skb->data, skb->len);
  79                 fcs = ~fcs;
  80
  81                 *skb_put (skb, 1) = fcs       & 0xff;
  82                 *skb_put (skb, 1) = (fcs>> 8) & 0xff;
  83                 *skb_put (skb, 1) = (fcs>>16) & 0xff;
  84                 *skb_put (skb, 1) = (fcs>>24) & 0xff;
  85         }
  86         return skb;
  87 }
  88
  89 static int zaurus_bind(struct usbnet *dev, struct usb_interface *intf)
  90 {
  91         /* Belcarra's funky framing has other options; mostly
  92          * TRAILERS (!) with 4 bytes CRC, and maybe 2 pad bytes.
  93          */
  94         dev->net->hard_header_len += 6;
  95         dev->rx_urb_size = dev->net->hard_header_len + dev->net->mtu;
  96         return usbnet_generic_cdc_bind(dev, intf);
  97 }
  98
  99 /* PDA style devices are always connected if present */
 100 static int always_connected (struct usbnet *dev)
 101 {
 102         return 0;
 103 }
 104
 105 static const struct driver_info zaurus_sl5x00_info = {
 106         .description =  "Sharp Zaurus SL-5x00",
 107         .flags =        FLAG_FRAMING_Z,
 108         .check_connect = always_connected,
 109         .bind =         zaurus_bind,
 110         .unbind =       usbnet_cdc_unbind,
 111         .tx_fixup =     zaurus_tx_fixup,
 112 };
 113 #define ZAURUS_STRONGARM_INFO   ((unsigned long)&zaurus_sl5x00_info)
 114
 115 static const struct driver_info zaurus_pxa_info = {
 116         .description =  "Sharp Zaurus, PXA-2xx based",
 117         .flags =        FLAG_FRAMING_Z,
 118         .check_connect = always_connected,
 119         .bind =         zaurus_bind,
 120         .unbind =       usbnet_cdc_unbind,
 121         .tx_fixup =     zaurus_tx_fixup,
 122 };
 123 #define ZAURUS_PXA_INFO         ((unsigned long)&zaurus_pxa_info)
 124
 125 static const struct driver_info olympus_mxl_info = {
 126         .description =  "Olympus R1000",
 127         .flags =        FLAG_FRAMING_Z,
 128         .check_connect = always_connected,
 129         .bind =         zaurus_bind,
 130         .unbind =       usbnet_cdc_unbind,
 131         .tx_fixup =     zaurus_tx_fixup,
 132 };
 133 #define OLYMPUS_MXL_INFO        ((unsigned long)&olympus_mxl_info)
 134
 135
 136 /* Some more recent products using Lineo/Belcarra code will wrongly claim
 137  * CDC MDLM conformance.  They aren't conformant:  data endpoints live
 138  * in the control interface, there's no data interface, and it's not used
 139  * to talk to a cell phone radio.  But at least we can detect these two
 140  * pseudo-classes, rather than growing this product list with entries for
 141  * each new nonconformant product (sigh).
 142  */
 143 static const u8 safe_guid[16] = {
 144         0x5d, 0x34, 0xcf, 0x66, 0x11, 0x18, 0x11, 0xd6,
 145         0xa2, 0x1a, 0x00, 0x01, 0x02, 0xca, 0x9a, 0x7f,
 146 };
 147 static const u8 blan_guid[16] = {
 148         0x74, 0xf0, 0x3d, 0xbd, 0x1e, 0xc1, 0x44, 0x70,
 149         0xa3, 0x67, 0x71, 0x34, 0xc9, 0xf5, 0x54, 0x37,
 150 };
 151
 152 static int blan_mdlm_bind(struct usbnet *dev, struct usb_interface *intf)
 153 {
 154         u8                              *buf = intf->cur_altsetting->extra;
 155         int                             len = intf->cur_altsetting->extralen;
 156         struct usb_cdc_mdlm_desc        *desc = NULL;
 157         struct usb_cdc_mdlm_detail_desc *detail = NULL;
 158
 159         while (len > 3) {
 160                 if (buf [1] != USB_DT_CS_INTERFACE)
 161                         goto next_desc;
 162
 163                 /* use bDescriptorSubType, and just verify that we get a
 164                  * "BLAN" (or "SAFE") descriptor.
 165                  */
 166                 switch (buf [2]) {
 167                 case USB_CDC_MDLM_TYPE:
 168                         if (desc) {
 169                                 dev_dbg(&intf->dev, "extra MDLM\n");
 170                                 goto bad_desc;
 171                         }
 172                         desc = (void *) buf;
 173                         if (desc->bLength != sizeof *desc) {
 174                                 dev_dbg(&intf->dev, "MDLM len %u\n",
 175                                         desc->bLength);
 176                                 goto bad_desc;
 177                         }
 178                         /* expect bcdVersion 1.0, ignore */
 179                         if (memcmp(&desc->bGUID, blan_guid, 16)
 180                                     && memcmp(&desc->bGUID, safe_guid, 16) ) {
 181                                 /* hey, this one might _really_ be MDLM! */
 182                                 dev_dbg(&intf->dev, "MDLM guid\n");
 183                                 goto bad_desc;
 184                         }
 185                         break;
 186                 case USB_CDC_MDLM_DETAIL_TYPE:
 187                         if (detail) {
 188                                 dev_dbg(&intf->dev, "extra MDLM detail\n");
 189                                 goto bad_desc;
 190                         }
 191                         detail = (void *) buf;
 192                         switch (detail->bGuidDescriptorType) {
 193                         case 0:                 /* "SAFE" */
 194                                 if (detail->bLength != (sizeof *detail + 2))
 195                                         goto bad_detail;
 196                                 break;
 197                         case 1:                 /* "BLAN" */
 198                                 if (detail->bLength != (sizeof *detail + 3))
 199                                         goto bad_detail;
 200                                 break;
 201                         default:
 202                                 goto bad_detail;
 203                         }
 204
 205                         /* assuming we either noticed BLAN already, or will
 206                          * find it soon, there are some data bytes here:
 207                          *  - bmNetworkCapabilities (unused)
 208                          *  - bmDataCapabilities (bits, see below)
 209                          *  - bPad (ignored, for PADAFTER -- BLAN-only)
 210                          * bits are:
 211                          *  - 0x01 -- Zaurus framing (add CRC)
 212                          *  - 0x02 -- PADBEFORE (CRC includes some padding)
 213                          *  - 0x04 -- PADAFTER (some padding after CRC)
 214                          *  - 0x08 -- "fermat" packet mangling (for hw bugs)
 215                          * the PADBEFORE appears not to matter; we interop
 216                          * with devices that use it and those that don't.
 217                          */
 218                         if ((detail->bDetailData[1] & ~0x02) != 0x01) {
 219                                 /* bmDataCapabilities == 0 would be fine too,
 220                                  * but framing is minidriver-coupled for now.
 221                                  */
 222 bad_detail:
 223                                 dev_dbg(&intf->dev,
 224                                                 "bad MDLM detail, %d %d %d\n",
 225                                                 detail->bLength,
 226                                                 detail->bDetailData[0],
 227                                                 detail->bDetailData[2]);
 228                                 goto bad_desc;
 229                         }
 230
 231                         /* same extra framing as for non-BLAN mode */
 232                         dev->net->hard_header_len += 6;
 233                         dev->rx_urb_size = dev->net->hard_header_len
 234                                         + dev->net->mtu;
 235                         break;
 236                 }
 237 next_desc:
 238                 len -= buf [0]; /* bLength */
 239                 buf += buf [0];
 240         }
 241
 242         if (!desc || !detail) {
 243                 dev_dbg(&intf->dev, "missing cdc mdlm %s%sdescriptor\n",
 244                         desc ? "" : "func ",
 245                         detail ? "" : "detail ");
 246                 goto bad_desc;
 247         }
 248
 249         /* There's probably a CDC Ethernet descriptor there, but we can't
 250          * rely on the Ethernet address it provides since not all vendors
 251          * bother to make it unique.  Likewise there's no point in tracking
 252          * of the CDC event notifications.
 253          */
 254         return usbnet_get_endpoints(dev, intf);
 255
 256 bad_desc:
 257         dev_info(&dev->udev->dev, "unsupported MDLM descriptors\n");
 258         return -ENODEV;
 259 }
 260
 261 static const struct driver_info bogus_mdlm_info = {
 262         .description =  "pseudo-MDLM (BLAN) device",
 263         .flags =        FLAG_FRAMING_Z,
 264         .check_connect = always_connected,
 265         .tx_fixup =     zaurus_tx_fixup,
 266         .bind =         blan_mdlm_bind,
 267 };
 268
 269 static const struct usb_device_id       products [] = {
 270 #define ZAURUS_MASTER_INTERFACE \
 271         .bInterfaceClass        = USB_CLASS_COMM, \
 272         .bInterfaceSubClass     = USB_CDC_SUBCLASS_ETHERNET, \
 273         .bInterfaceProtocol     = USB_CDC_PROTO_NONE
 274
 275 /* SA-1100 based Sharp Zaurus ("collie"), or compatible. */
 276 {
 277         .match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
 278                           | USB_DEVICE_ID_MATCH_DEVICE,
 279         .idVendor               = 0x04DD,
 280         .idProduct              = 0x8004,
 281         ZAURUS_MASTER_INTERFACE,
 282         .driver_info = ZAURUS_STRONGARM_INFO,
 283 },
 284
 285 /* PXA-2xx based models are also lying-about-cdc.  If you add any
 286  * more devices that claim to be CDC Ethernet, make sure they get
 287  * added to the blacklist in cdc_ether too.
 288  *
 289  * NOTE:  OpenZaurus versions with 2.6 kernels won't use these entries,
 290  * unlike the older ones with 2.4 "embedix" kernels.
 291  */
 292 {
 293         .match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
 294                           | USB_DEVICE_ID_MATCH_DEVICE,
 295         .idVendor               = 0x04DD,
 296         .idProduct              = 0x8005,       /* A-300 */
 297         ZAURUS_MASTER_INTERFACE,
 298         .driver_info = ZAURUS_PXA_INFO,
 299 }, {
 300         .match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
 301                           | USB_DEVICE_ID_MATCH_DEVICE,
 302         .idVendor               = 0x04DD,
 303         .idProduct              = 0x8006,       /* B-500/SL-5600 */
 304         ZAURUS_MASTER_INTERFACE,
 305         .driver_info = ZAURUS_PXA_INFO,
 306 }, {
 307         .match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
 308                   | USB_DEVICE_ID_MATCH_DEVICE,
 309         .idVendor               = 0x04DD,
 310         .idProduct              = 0x8007,       /* C-700 */
 311         ZAURUS_MASTER_INTERFACE,
 312         .driver_info = ZAURUS_PXA_INFO,
 313 }, {
 314         .match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
 315                  | USB_DEVICE_ID_MATCH_DEVICE,
 316         .idVendor               = 0x04DD,
 317         .idProduct              = 0x9031,       /* C-750 C-760 */
 318         ZAURUS_MASTER_INTERFACE,
 319         .driver_info = ZAURUS_PXA_INFO,
 320 }, {
 321         .match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
 322                  | USB_DEVICE_ID_MATCH_DEVICE,
 323         .idVendor               = 0x04DD,
 324         .idProduct              = 0x9032,       /* SL-6000 */
 325         ZAURUS_MASTER_INTERFACE,
 326         .driver_info = ZAURUS_PXA_INFO,
 327 }, {
 328         .match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
 329                  | USB_DEVICE_ID_MATCH_DEVICE,
 330         .idVendor               = 0x04DD,
 331         /* reported with some C860 units */
 332         .idProduct              = 0x9050,       /* C-860 */
 333         ZAURUS_MASTER_INTERFACE,
 334         .driver_info = ZAURUS_PXA_INFO,
 335 },
 336
 337
 338 /* At least some of the newest PXA units have very different lies about
 339  * their standards support:  they claim to be cell phones offering
 340  * direct access to their radios!  (No, they don't conform to CDC MDLM.)
 341  */
 342 {
 343         USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_MDLM,
 344                         USB_CDC_PROTO_NONE),
 345         .driver_info = (unsigned long) &bogus_mdlm_info,
 346 },
 347
 348 /* Olympus has some models with a Zaurus-compatible option.
 349  * R-1000 uses a FreeScale i.MXL cpu (ARMv4T)
 350  */
 351 {
 352         .match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
 353                  | USB_DEVICE_ID_MATCH_DEVICE,
 354         .idVendor               = 0x07B4,
 355         .idProduct              = 0x0F02,       /* R-1000 */
 356         ZAURUS_MASTER_INTERFACE,
 357         .driver_info = OLYMPUS_MXL_INFO,
 358 },
 359         { },            // END
 360 };
 361 MODULE_DEVICE_TABLE(usb, products);
 362
 363 static struct usb_driver zaurus_driver = {
 364         .name =         "zaurus",
 365         .id_table =     products,
 366         .probe =        usbnet_probe,
 367         .disconnect =   usbnet_disconnect,
 368         .suspend =      usbnet_suspend,
 369         .resume =       usbnet_resume,
 370 };
 371
 372 static int __init zaurus_init(void)
 373 {
 374         return usb_register(&zaurus_driver);
 375 }
 376 module_init(zaurus_init);
 377
 378 static void __exit zaurus_exit(void)
 379 {
 380         usb_deregister(&zaurus_driver);
 381 }
 382 module_exit(zaurus_exit);
 383
 384 MODULE_AUTHOR("Pavel Machek, David Brownell");
 385 MODULE_DESCRIPTION("Sharp Zaurus PDA, and compatible products");
 386 MODULE_LICENSE("GPL");