drivers/usb/storage/unusual_devs.h

   1 /* Driver for USB Mass Storage compliant devices
   2  * Ununsual Devices File
   3  *
   4  * $Id: unusual_devs.h,v 1.32 2002/02/25 02:41:24 mdharm Exp $
   5  *
   6  * Current development and maintenance by:
   7  *   (c) 2000-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
   8  *
   9  * Initial work by:
  10  *   (c) 2000 Adam J. Richter (adam@yggdrasil.com), Yggdrasil Computing, Inc.
  11  *
  12  * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more
  13  * information about this driver.
  14  *
  15  * This program is free software; you can redistribute it and/or modify it
  16  * under the terms of the GNU General Public License as published by the
  17  * Free Software Foundation; either version 2, or (at your option) any
  18  * later version.
  19  *
  20  * This program is distributed in the hope that it will be useful, but
  21  * WITHOUT ANY WARRANTY; without even the implied warranty of
  22  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  23  * General Public License for more details.
  24  *
  25  * You should have received a copy of the GNU General Public License along
  26  * with this program; if not, write to the Free Software Foundation, Inc.,
  27  * 675 Mass Ave, Cambridge, MA 02139, USA.
  28  */
  29
  30 /* IMPORTANT NOTE: This file must be included in another file which does
  31  * the following thing for it to work:
  32  * The macro UNUSUAL_DEV() must be defined before this file is included
  33  */
  34 #include <linux/config.h>
  35
  36 /* If you edit this file, please try to keep it sorted first by VendorID,
  37  * then by ProductID.
  38  *
  39  * If you want to add an entry for this file, be sure to include the
  40  * following information:
  41  *      - a patch that adds the entry for your device, including your
  42  *        email address right above the entry (plus maybe a brief
  43  *        explanation of the reason for the entry),
  44  *      - a copy of /proc/bus/usb/devices with your device plugged in
  45  *        running with this patch.
  46  * Send your submission to either Phil Dibowitz <phil@ipom.com> or
  47  * Alan Stern <stern@rowland.harvard.edu>, and don't forget to CC: the
  48  * USB development list <linux-usb-devel@lists.sourceforge.net>.
  49  */
  50
  51 UNUSUAL_DEV(  0x03ee, 0x6901, 0x0000, 0x0100,
  52                 "Mitsumi",
  53                 "USB FDD",
  54                 US_SC_DEVICE, US_PR_DEVICE, NULL,
  55                 US_FL_SINGLE_LUN ),
  56
  57 UNUSUAL_DEV(  0x03f0, 0x0107, 0x0200, 0x0200,
  58                 "HP",
  59                 "CD-Writer+",
  60                 US_SC_8070, US_PR_CB, NULL, 0),
  61
  62 #ifdef CONFIG_USB_STORAGE_HP8200e
  63 UNUSUAL_DEV(  0x03f0, 0x0207, 0x0001, 0x0001,
  64                 "HP",
  65                 "CD-Writer+ 8200e",
  66                 US_SC_8070, US_PR_SCM_ATAPI, init_8200e, 0),
  67
  68 UNUSUAL_DEV(  0x03f0, 0x0307, 0x0001, 0x0001,
  69                 "HP",
  70                 "CD-Writer+ CD-4e",
  71                 US_SC_8070, US_PR_SCM_ATAPI, init_8200e, 0),
  72 #endif
  73
  74 /* Deduced by Jonathan Woithe <jwoithe@physics.adelaide.edu.au>
  75  * Entry needed for flags: US_FL_FIX_INQUIRY because initial inquiry message
  76  * always fails and confuses drive.
  77  */
  78 UNUSUAL_DEV(  0x0411, 0x001c, 0x0113, 0x0113,
  79                 "Buffalo",
  80                 "DUB-P40G HDD",
  81                 US_SC_DEVICE, US_PR_DEVICE, NULL,
  82                 US_FL_FIX_INQUIRY ),
  83
  84 #ifdef CONFIG_USB_STORAGE_DPCM
  85 UNUSUAL_DEV(  0x0436, 0x0005, 0x0100, 0x0100,
  86                 "Microtech",
  87                 "CameraMate (DPCM_USB)",
  88                 US_SC_SCSI, US_PR_DPCM_USB, NULL, 0 ),
  89 #endif
  90
  91 /* Patch submitted by Philipp Friedrich <philipp@void.at> */
  92 UNUSUAL_DEV(  0x0482, 0x0100, 0x0100, 0x0100,
  93                 "Kyocera",
  94                 "Finecam S3x",
  95                 US_SC_8070, US_PR_CB, NULL, US_FL_FIX_INQUIRY),
  96
  97 /* Patch submitted by Philipp Friedrich <philipp@void.at> */
  98 UNUSUAL_DEV(  0x0482, 0x0101, 0x0100, 0x0100,
  99                 "Kyocera",
 100                 "Finecam S4",
 101                 US_SC_8070, US_PR_CB, NULL, US_FL_FIX_INQUIRY),
 102
 103 /* Patch submitted by Stephane Galles <stephane.galles@free.fr> */
 104 UNUSUAL_DEV(  0x0482, 0x0103, 0x0100, 0x0100,
 105                 "Kyocera",
 106                 "Finecam S5",
 107                 US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY),
 108
 109 /* Patch for Kyocera Finecam L3
 110  * Submitted by Michael Krauth <michael.krauth@web.de>
 111  * and Alessandro Fracchetti <al.fracchetti@tin.it>
 112  */
 113 UNUSUAL_DEV(  0x0482, 0x0105, 0x0100, 0x0100,
 114                 "Kyocera",
 115                 "Finecam L3",
 116                 US_SC_SCSI, US_PR_BULK, NULL,
 117                 US_FL_FIX_INQUIRY),
 118
 119 /* Reported by Paul Stewart <stewart@wetlogic.net>
 120  * This entry is needed because the device reports Sub=ff */
 121 UNUSUAL_DEV(  0x04a4, 0x0004, 0x0001, 0x0001,
 122                 "Hitachi",
 123                 "DVD-CAM DZ-MV100A Camcorder",
 124                 US_SC_SCSI, US_PR_CB, NULL, US_FL_SINGLE_LUN),
 125
 126 /* Reported by Simon Levitt <simon@whattf.com>
 127  * This entry needs Sub and Proto fields */
 128 UNUSUAL_DEV(  0x04b8, 0x0601, 0x0100, 0x0100,
 129                 "Epson",
 130                 "875DC Storage",
 131                 US_SC_SCSI, US_PR_CB, NULL, US_FL_FIX_INQUIRY),
 132
 133 /* Reported by Khalid Aziz <khalid@gonehiking.org>
 134  * This entry is needed because the device reports Sub=ff */
 135 UNUSUAL_DEV(  0x04b8, 0x0602, 0x0110, 0x0110,
 136                 "Epson",
 137                 "785EPX Storage",
 138                 US_SC_SCSI, US_PR_BULK, NULL, US_FL_SINGLE_LUN),
 139
 140 /* Not sure who reported this originally but
 141  * Pavel Machek <pavel@ucw.cz> reported that the extra US_FL_SINGLE_LUN
 142  * flag be added */
 143 UNUSUAL_DEV(  0x04cb, 0x0100, 0x0000, 0x2210,
 144                 "Fujifilm",
 145                 "FinePix 1400Zoom",
 146                 US_SC_UFI, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY | US_FL_SINGLE_LUN),
 147
 148 /* Reported by Peter Wächtler <pwaechtler@loewe-komp.de>
 149  * The device needs the flags only.
 150  */
 151 UNUSUAL_DEV(  0x04ce, 0x0002, 0x0074, 0x0074,
 152                 "ScanLogic",
 153                 "SL11R-IDE",
 154                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 155                 US_FL_FIX_INQUIRY),
 156
 157 /* Reported by Kriston Fincher <kriston@airmail.net>
 158  * Patch submitted by Sean Millichamp <sean@bruenor.org>
 159  * This is to support the Panasonic PalmCam PV-SD4090
 160  * This entry is needed because the device reports Sub=ff
 161  */
 162 UNUSUAL_DEV(  0x04da, 0x0901, 0x0100, 0x0200,
 163                 "Panasonic",
 164                 "LS-120 Camera",
 165                 US_SC_UFI, US_PR_DEVICE, NULL, 0),
 166
 167 /* From Yukihiro Nakai, via zaitcev@yahoo.com.
 168  * This is needed for CB instead of CBI */
 169 UNUSUAL_DEV(  0x04da, 0x0d05, 0x0000, 0x0000,
 170                 "Sharp CE-CW05",
 171                 "CD-R/RW Drive",
 172                 US_SC_8070, US_PR_CB, NULL, 0),
 173
 174 /* Reported by Adriaan Penning <a.penning@luon.net>
 175  * Note that these cameras report "Medium not present" after
 176  * ALLOW_MEDIUM_REMOVAL, so they also need to be marked
 177  * NOT_LOCKABLE in the SCSI blacklist (and the vendor is MATSHITA). */
 178 UNUSUAL_DEV(  0x04da, 0x2372, 0x0000, 0x9999,
 179                 "Panasonic",
 180                 "DMC-LCx Camera",
 181                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 182                 US_FL_FIX_CAPACITY ),
 183
 184 /* Most of the following entries were developed with the help of
 185  * Shuttle/SCM directly.
 186  */
 187 UNUSUAL_DEV(  0x04e6, 0x0001, 0x0200, 0x0200,
 188                 "Matshita",
 189                 "LS-120",
 190                 US_SC_8020, US_PR_CB, NULL, 0),
 191
 192 UNUSUAL_DEV(  0x04e6, 0x0002, 0x0100, 0x0100,
 193                 "Shuttle",
 194                 "eUSCSI Bridge",
 195                 US_SC_DEVICE, US_PR_DEVICE, usb_stor_euscsi_init,
 196                 US_FL_SCM_MULT_TARG ),
 197
 198 #ifdef CONFIG_USB_STORAGE_SDDR09
 199 UNUSUAL_DEV(  0x04e6, 0x0003, 0x0000, 0x9999,
 200                 "Sandisk",
 201                 "ImageMate SDDR09",
 202                 US_SC_SCSI, US_PR_EUSB_SDDR09, NULL,
 203                 US_FL_SINGLE_LUN ),
 204
 205 /* This entry is from Andries.Brouwer@cwi.nl */
 206 UNUSUAL_DEV(  0x04e6, 0x0005, 0x0100, 0x0208,
 207                 "SCM Microsystems",
 208                 "eUSB SmartMedia / CompactFlash Adapter",
 209                 US_SC_SCSI, US_PR_DPCM_USB, sddr09_init,
 210                 0),
 211 #endif
 212
 213 /* Reported by Markus Demleitner <msdemlei@cl.uni-heidelberg.de> */
 214 UNUSUAL_DEV(  0x04e6, 0x0006, 0x0100, 0x0100,
 215                 "SCM Microsystems Inc.",
 216                 "eUSB MMC Adapter",
 217                 US_SC_SCSI, US_PR_CB, NULL,
 218                 US_FL_SINGLE_LUN),
 219
 220 /* Reported by Daniel Nouri <dpunktnpunkt@web.de> */
 221 UNUSUAL_DEV(  0x04e6, 0x0006, 0x0205, 0x0205,
 222                 "Shuttle",
 223                 "eUSB MMC Adapter",
 224                 US_SC_SCSI, US_PR_DEVICE, NULL,
 225                 US_FL_SINGLE_LUN),
 226
 227 UNUSUAL_DEV(  0x04e6, 0x0007, 0x0100, 0x0200,
 228                 "Sony",
 229                 "Hifd",
 230                 US_SC_SCSI, US_PR_CB, NULL,
 231                 US_FL_SINGLE_LUN),
 232
 233 UNUSUAL_DEV(  0x04e6, 0x0009, 0x0200, 0x0200,
 234                 "Shuttle",
 235                 "eUSB ATA/ATAPI Adapter",
 236                 US_SC_8020, US_PR_CB, NULL, 0),
 237
 238 UNUSUAL_DEV(  0x04e6, 0x000a, 0x0200, 0x0200,
 239                 "Shuttle",
 240                 "eUSB CompactFlash Adapter",
 241                 US_SC_8020, US_PR_CB, NULL, 0),
 242
 243 UNUSUAL_DEV(  0x04e6, 0x000B, 0x0100, 0x0100,
 244                 "Shuttle",
 245                 "eUSCSI Bridge",
 246                 US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init,
 247                 US_FL_SCM_MULT_TARG ),
 248
 249 UNUSUAL_DEV(  0x04e6, 0x000C, 0x0100, 0x0100,
 250                 "Shuttle",
 251                 "eUSCSI Bridge",
 252                 US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init,
 253                 US_FL_SCM_MULT_TARG ),
 254
 255 UNUSUAL_DEV(  0x04e6, 0x0101, 0x0200, 0x0200,
 256                 "Shuttle",
 257                 "CD-RW Device",
 258                 US_SC_8020, US_PR_CB, NULL, 0),
 259
 260 /* Entry and supporting patch by Theodore Kilgore <kilgota@auburn.edu>.
 261  * Device uses standards-violating 32-byte Bulk Command Block Wrappers and
 262  * reports itself as "Proprietary SCSI Bulk." Cf. device entry 0x084d:0x0011.
 263  */
 264
 265 UNUSUAL_DEV(  0x04fc, 0x80c2, 0x0100, 0x0100,
 266                 "Kobian Mercury",
 267                 "Binocam DCB-132",
 268                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 269                 US_FL_BULK32),
 270
 271 /* Reported by Bob Sass <rls@vectordb.com> -- only rev 1.33 tested */
 272 UNUSUAL_DEV(  0x050d, 0x0115, 0x0133, 0x0133,
 273                 "Belkin",
 274                 "USB SCSI Adaptor",
 275                 US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init,
 276                 US_FL_SCM_MULT_TARG ),
 277
 278 /* Iomega Clik! Drive
 279  * Reported by David Chatenay <dchatenay@hotmail.com>
 280  * The reason this is needed is not fully known.
 281  */
 282 UNUSUAL_DEV(  0x0525, 0xa140, 0x0100, 0x0100,
 283                 "Iomega",
 284                 "USB Clik! 40",
 285                 US_SC_8070, US_PR_BULK, NULL,
 286                 US_FL_FIX_INQUIRY ),
 287
 288 /* Yakumo Mega Image 37
 289  * Submitted by Stephan Fuhrmann <atomenergie@t-online.de> */
 290 UNUSUAL_DEV(  0x052b, 0x1801, 0x0100, 0x0100,
 291                 "Tekom Technologies, Inc",
 292                 "300_CAMERA",
 293                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 294                 US_FL_IGNORE_RESIDUE ),
 295
 296 /* Another Yakumo camera.
 297  * Reported by Michele Alzetta <michele.alzetta@aliceposta.it> */
 298 UNUSUAL_DEV(  0x052b, 0x1804, 0x0100, 0x0100,
 299                 "Tekom Technologies, Inc",
 300                 "300_CAMERA",
 301                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 302                 US_FL_IGNORE_RESIDUE ),
 303
 304 /* Reported by Iacopo Spalletti <avvisi@spalletti.it> */
 305 UNUSUAL_DEV(  0x052b, 0x1807, 0x0100, 0x0100,
 306                 "Tekom Technologies, Inc",
 307                 "300_CAMERA",
 308                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 309                 US_FL_IGNORE_RESIDUE ),
 310
 311 /* Yakumo Mega Image 47
 312  * Reported by Bjoern Paetzel <kolrabi@kolrabi.de> */
 313 UNUSUAL_DEV(  0x052b, 0x1905, 0x0100, 0x0100,
 314                 "Tekom Technologies, Inc",
 315                 "400_CAMERA",
 316                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 317                 US_FL_IGNORE_RESIDUE ),
 318
 319 /* Reported by Paul Ortyl <ortylp@3miasto.net>
 320  * Note that it's similar to the device above, only different prodID */
 321 UNUSUAL_DEV(  0x052b, 0x1911, 0x0100, 0x0100,
 322                 "Tekom Technologies, Inc",
 323                 "400_CAMERA",
 324                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 325                 US_FL_IGNORE_RESIDUE ),
 326
 327 /* This entry is needed because the device reports Sub=ff */
 328 UNUSUAL_DEV(  0x054c, 0x0010, 0x0106, 0x0450,
 329                 "Sony",
 330                 "DSC-S30/S70/S75/505V/F505/F707/F717/P8",
 331                 US_SC_SCSI, US_PR_DEVICE, NULL,
 332                 US_FL_SINGLE_LUN ),
 333
 334 /* This entry is needed because the device reports Sub=ff */
 335 UNUSUAL_DEV(  0x054c, 0x0010, 0x0500, 0x0500,
 336                "Sony",
 337                "DSC-T1",
 338                US_SC_8070, US_PR_DEVICE, NULL,
 339                US_FL_SINGLE_LUN ),
 340
 341
 342 /* Reported by wim@geeks.nl */
 343 UNUSUAL_DEV(  0x054c, 0x0025, 0x0100, 0x0100,
 344                 "Sony",
 345                 "Memorystick NW-MS7",
 346                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 347                 US_FL_SINGLE_LUN ),
 348
 349 #ifdef CONFIG_USB_STORAGE_ISD200
 350 UNUSUAL_DEV(  0x054c, 0x002b, 0x0100, 0x0110,
 351                 "Sony",
 352                 "Portable USB Harddrive V2",
 353                 US_SC_ISD200, US_PR_BULK, isd200_Initialization,
 354                 0 ),
 355 #endif
 356
 357 UNUSUAL_DEV(  0x054c, 0x002d, 0x0100, 0x0100,
 358                 "Sony",
 359                 "Memorystick MSAC-US1",
 360                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 361                 US_FL_SINGLE_LUN ),
 362
 363 /* Submitted by Klaus Mueller <k.mueller@intershop.de> */
 364 UNUSUAL_DEV(  0x054c, 0x002e, 0x0106, 0x0310,
 365                 "Sony",
 366                 "Handycam",
 367                 US_SC_SCSI, US_PR_DEVICE, NULL,
 368                 US_FL_SINGLE_LUN ),
 369
 370 /* Submitted by Rajesh Kumble Nayak <nayak@obs-nice.fr> */
 371 UNUSUAL_DEV(  0x054c, 0x002e, 0x0500, 0x0500,
 372                 "Sony",
 373                 "Handycam HC-85",
 374                 US_SC_UFI, US_PR_DEVICE, NULL,
 375                 US_FL_SINGLE_LUN ),
 376
 377 UNUSUAL_DEV(  0x054c, 0x0032, 0x0000, 0x9999,
 378                 "Sony",
 379                 "Memorystick MSC-U01N",
 380                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 381                 US_FL_SINGLE_LUN ),
 382
 383 /* Submitted by Michal Mlotek <mlotek@foobar.pl> */
 384 UNUSUAL_DEV(  0x054c, 0x0058, 0x0000, 0x9999,
 385                 "Sony",
 386                 "PEG N760c Memorystick",
 387                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 388                 US_FL_FIX_INQUIRY ),
 389
 390 UNUSUAL_DEV(  0x054c, 0x0069, 0x0000, 0x9999,
 391                 "Sony",
 392                 "Memorystick MSC-U03",
 393                 US_SC_UFI, US_PR_CB, NULL,
 394                 US_FL_SINGLE_LUN ),
 395
 396 /* Submitted by Nathan Babb <nathan@lexi.com> */
 397 UNUSUAL_DEV(  0x054c, 0x006d, 0x0000, 0x9999,
 398                 "Sony",
 399                 "PEG Mass Storage",
 400                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 401                 US_FL_FIX_INQUIRY ),
 402
 403 /* Submitted by Mike Alborn <malborn@deandra.homeip.net> */
 404 UNUSUAL_DEV(  0x054c, 0x016a, 0x0000, 0x9999,
 405                 "Sony",
 406                 "PEG Mass Storage",
 407                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 408                 US_FL_FIX_INQUIRY ),
 409
 410 /* Submitted by Frank Engel <frankie@cse.unsw.edu.au> */
 411 UNUSUAL_DEV(  0x054c, 0x0099, 0x0000, 0x9999,
 412                 "Sony",
 413                 "PEG Mass Storage",
 414                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 415                 US_FL_FIX_INQUIRY ),
 416
 417
 418 UNUSUAL_DEV(  0x057b, 0x0000, 0x0000, 0x0299,
 419                 "Y-E Data",
 420                 "Flashbuster-U",
 421                 US_SC_DEVICE,  US_PR_CB, NULL,
 422                 US_FL_SINGLE_LUN),
 423
 424 UNUSUAL_DEV(  0x057b, 0x0000, 0x0300, 0x9999,
 425                 "Y-E Data",
 426                 "Flashbuster-U",
 427                 US_SC_DEVICE,  US_PR_DEVICE, NULL,
 428                 US_FL_SINGLE_LUN),
 429
 430 /* Reported by Johann Cardon <johann.cardon@free.fr>
 431  * This entry is needed only because the device reports
 432  * bInterfaceClass = 0xff (vendor-specific)
 433  */
 434 UNUSUAL_DEV(  0x057b, 0x0022, 0x0000, 0x9999,
 435                 "Y-E Data",
 436                 "Silicon Media R/W",
 437                 US_SC_DEVICE, US_PR_DEVICE, NULL, 0),
 438
 439 /* Fabrizio Fellini <fello@libero.it> */
 440 UNUSUAL_DEV(  0x0595, 0x4343, 0x0000, 0x2210,
 441                 "Fujifilm",
 442                 "Digital Camera EX-20 DSC",
 443                 US_SC_8070, US_PR_DEVICE, NULL, 0 ),
 444
 445 /* The entry was here before I took over, and had US_SC_RBC. It turns
 446  * out that isn't needed. Additionally, Torsten Eriksson
 447  * <Torsten.Eriksson@bergianska.se> is able to use his device fine
 448  * without this entry at all - but I don't suspect that will be true
 449  * for all users (the protocol is likely needed), so is staying at
 450  * this time. - Phil Dibowitz <phil@ipom.com>
 451  */
 452 UNUSUAL_DEV(  0x059f, 0xa601, 0x0200, 0x0200,
 453                 "LaCie",
 454                 "USB Hard Disk",
 455                 US_SC_DEVICE, US_PR_CB, NULL, 0 ),
 456
 457 /* Submitted by Joel Bourquard <numlock@freesurf.ch>
 458  * Some versions of this device need the SubClass and Protocol overrides
 459  * while others don't.
 460  */
 461 UNUSUAL_DEV(  0x05ab, 0x0060, 0x1104, 0x1110,
 462                 "In-System",
 463                 "PyroGate External CD-ROM Enclosure (FCD-523)",
 464                 US_SC_SCSI, US_PR_BULK, NULL,
 465                 US_FL_NEED_OVERRIDE ),
 466
 467 #ifdef CONFIG_USB_STORAGE_ISD200
 468 UNUSUAL_DEV(  0x05ab, 0x0031, 0x0100, 0x0110,
 469                 "In-System",
 470                 "USB/IDE Bridge (ATA/ATAPI)",
 471                 US_SC_ISD200, US_PR_BULK, isd200_Initialization,
 472                 0 ),
 473
 474 UNUSUAL_DEV(  0x05ab, 0x0301, 0x0100, 0x0110,
 475                 "In-System",
 476                 "Portable USB Harddrive V2",
 477                 US_SC_ISD200, US_PR_BULK, isd200_Initialization,
 478                 0 ),
 479
 480 UNUSUAL_DEV(  0x05ab, 0x0351, 0x0100, 0x0110,
 481                 "In-System",
 482                 "Portable USB Harddrive V2",
 483                 US_SC_ISD200, US_PR_BULK, isd200_Initialization,
 484                 0 ),
 485
 486 UNUSUAL_DEV(  0x05ab, 0x5701, 0x0100, 0x0110,
 487                 "In-System",
 488                 "USB Storage Adapter V2",
 489                 US_SC_ISD200, US_PR_BULK, isd200_Initialization,
 490                 0 ),
 491 #endif
 492
 493 /* Reported by Avi Kivity <avi@argo.co.il> */
 494 UNUSUAL_DEV( 0x05ac, 0x1203, 0x0001, 0x0001,
 495                 "Apple",
 496                 "iPod",
 497                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 498                 US_FL_FIX_CAPACITY ),
 499
 500 #ifdef CONFIG_USB_STORAGE_JUMPSHOT
 501 UNUSUAL_DEV(  0x05dc, 0x0001, 0x0000, 0x0001,
 502                 "Lexar",
 503                 "Jumpshot USB CF Reader",
 504                 US_SC_SCSI, US_PR_JUMPSHOT, NULL,
 505                 US_FL_NEED_OVERRIDE ),
 506 #endif
 507
 508 /* Reported by Blake Matheny <bmatheny@purdue.edu> */
 509 UNUSUAL_DEV(  0x05dc, 0xb002, 0x0000, 0x0113,
 510                 "Lexar",
 511                 "USB CF Reader",
 512                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 513                 US_FL_FIX_INQUIRY ),
 514
 515 /* Reported by Hanno Boeck <hanno@gmx.de>
 516  * Taken from the Lycoris Kernel */
 517 UNUSUAL_DEV(  0x0636, 0x0003, 0x0000, 0x9999,
 518                 "Vivitar",
 519                 "Vivicam 35Xx",
 520                 US_SC_SCSI, US_PR_BULK, NULL,
 521                 US_FL_FIX_INQUIRY ),
 522
 523 UNUSUAL_DEV(  0x0644, 0x0000, 0x0100, 0x0100,
 524                 "TEAC",
 525                 "Floppy Drive",
 526                 US_SC_UFI, US_PR_CB, NULL, 0 ),
 527
 528 #ifdef CONFIG_USB_STORAGE_SDDR09
 529 UNUSUAL_DEV(  0x066b, 0x0105, 0x0100, 0x0100,
 530                 "Olympus",
 531                 "Camedia MAUSB-2",
 532                 US_SC_SCSI, US_PR_EUSB_SDDR09, NULL,
 533                 US_FL_SINGLE_LUN ),
 534 #endif
 535
 536 /* Reported by Darsen Lu <darsen@micro.ee.nthu.edu.tw> */
 537 UNUSUAL_DEV( 0x066f, 0x8000, 0x0001, 0x0001,
 538                 "SigmaTel",
 539                 "USBMSC Audio Player",
 540                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 541                 US_FL_FIX_CAPACITY ),
 542
 543 /* Reported by Alex Butcher <alex.butcher@assursys.co.uk> */
 544 UNUSUAL_DEV( 0x067b, 0x3507, 0x0001, 0x0001,
 545                 "Prolific Technology Inc.",
 546                 "ATAPI-6 Bridge Controller",
 547                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 548                 US_FL_FIX_CAPACITY ),
 549
 550 /* Reported by Alex Butcher <alex.butcher@assursys.co.uk> */
 551 UNUSUAL_DEV( 0x067b, 0x3507, 0x0001, 0x0001,
 552                 "Prolific Technology Inc.",
 553                 "ATAPI-6 Bridge Controller",
 554                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 555                 US_FL_FIX_CAPACITY ),
 556
 557 /* Submitted by Benny Sjostrand <benny@hostmobility.com> */
 558 UNUSUAL_DEV( 0x0686, 0x4011, 0x0001, 0x0001,
 559                 "Minolta",
 560                 "Dimage F300",
 561                 US_SC_SCSI, US_PR_BULK, NULL, 0 ),
 562
 563 /* Reported by Miguel A. Fosas <amn3s1a@ono.com> */
 564 UNUSUAL_DEV(  0x0686, 0x4017, 0x0001, 0x0001,
 565                 "Minolta",
 566                 "DIMAGE E223",
 567                 US_SC_SCSI, US_PR_DEVICE, NULL, 0 ),
 568
 569 UNUSUAL_DEV(  0x0693, 0x0002, 0x0100, 0x0100,
 570                 "Hagiwara",
 571                 "FlashGate SmartMedia",
 572                 US_SC_SCSI, US_PR_BULK, NULL, 0 ),
 573
 574 UNUSUAL_DEV(  0x0693, 0x0005, 0x0100, 0x0100,
 575                 "Hagiwara",
 576                 "Flashgate",
 577                 US_SC_SCSI, US_PR_BULK, NULL, 0 ),
 578
 579 UNUSUAL_DEV(  0x0781, 0x0001, 0x0200, 0x0200,
 580                 "Sandisk",
 581                 "ImageMate SDDR-05a",
 582                 US_SC_SCSI, US_PR_CB, NULL,
 583                 US_FL_SINGLE_LUN ),
 584
 585 #if !defined(CONFIG_BLK_DEV_UB) && !defined(CONFIG_BLK_DEV_UB_MODULE)
 586 UNUSUAL_DEV(  0x0781, 0x0002, 0x0009, 0x0009,
 587                 "Sandisk",
 588                 "ImageMate SDDR-31",
 589                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 590                 US_FL_IGNORE_SER ),
 591 #endif
 592
 593 UNUSUAL_DEV(  0x0781, 0x0100, 0x0100, 0x0100,
 594                 "Sandisk",
 595                 "ImageMate SDDR-12",
 596                 US_SC_SCSI, US_PR_CB, NULL,
 597                 US_FL_SINGLE_LUN ),
 598
 599 #ifdef CONFIG_USB_STORAGE_SDDR09
 600 UNUSUAL_DEV(  0x0781, 0x0200, 0x0000, 0x9999,
 601                 "Sandisk",
 602                 "ImageMate SDDR-09",
 603                 US_SC_SCSI, US_PR_EUSB_SDDR09, NULL,
 604                 US_FL_SINGLE_LUN ),
 605 #endif
 606
 607 #ifdef CONFIG_USB_STORAGE_FREECOM
 608 UNUSUAL_DEV(  0x07ab, 0xfc01, 0x0000, 0x9999,
 609                 "Freecom",
 610                 "USB-IDE",
 611                 US_SC_QIC, US_PR_FREECOM, freecom_init, 0),
 612 #endif
 613
 614 /* Reported by Eero Volotinen <eero@ping-viini.org> */
 615 UNUSUAL_DEV(  0x07ab, 0xfccd, 0x0406, 0x0406,
 616                 "Freecom Technologies",
 617                 "FHD-Classic",
 618                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 619                 US_FL_FIX_CAPACITY),
 620
 621 UNUSUAL_DEV(  0x07af, 0x0004, 0x0100, 0x0133,
 622                 "Microtech",
 623                 "USB-SCSI-DB25",
 624                 US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init,
 625                 US_FL_SCM_MULT_TARG ),
 626
 627 UNUSUAL_DEV(  0x07af, 0x0005, 0x0100, 0x0100,
 628                 "Microtech",
 629                 "USB-SCSI-HD50",
 630                 US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init,
 631                 US_FL_SCM_MULT_TARG ),
 632
 633 #ifdef CONFIG_USB_STORAGE_DPCM
 634 UNUSUAL_DEV(  0x07af, 0x0006, 0x0100, 0x0100,
 635                 "Microtech",
 636                 "CameraMate (DPCM_USB)",
 637                 US_SC_SCSI, US_PR_DPCM_USB, NULL, 0 ),
 638 #endif
 639
 640 #ifdef CONFIG_USB_STORAGE_DATAFAB
 641 UNUSUAL_DEV(  0x07c4, 0xa000, 0x0000, 0x0015,
 642                 "Datafab",
 643                 "MDCFE-B USB CF Reader",
 644                 US_SC_SCSI, US_PR_DATAFAB, NULL,
 645                 0 ),
 646
 647 /*
 648  * The following Datafab-based devices may or may not work
 649  * using the current driver...the 0xffff is arbitrary since I
 650  * don't know what device versions exist for these guys.
 651  *
 652  * The 0xa003 and 0xa004 devices in particular I'm curious about.
 653  * I'm told they exist but so far nobody has come forward to say that
 654  * they work with this driver.  Given the success we've had getting
 655  * other Datafab-based cards operational with this driver, I've decided
 656  * to leave these two devices in the list.
 657  */
 658 UNUSUAL_DEV( 0x07c4, 0xa001, 0x0000, 0xffff,
 659                 "SIIG/Datafab",
 660                 "SIIG/Datafab Memory Stick+CF Reader/Writer",
 661                 US_SC_SCSI, US_PR_DATAFAB, NULL,
 662                 0 ),
 663
 664 UNUSUAL_DEV( 0x07c4, 0xa003, 0x0000, 0xffff,
 665                 "Datafab/Unknown",
 666                 "Datafab-based Reader",
 667                 US_SC_SCSI, US_PR_DATAFAB, NULL,
 668                 0 ),
 669
 670 UNUSUAL_DEV( 0x07c4, 0xa004, 0x0000, 0xffff,
 671                 "Datafab/Unknown",
 672                 "Datafab-based Reader",
 673                 US_SC_SCSI, US_PR_DATAFAB, NULL,
 674                 0 ),
 675
 676 UNUSUAL_DEV( 0x07c4, 0xa005, 0x0000, 0xffff,
 677                 "PNY/Datafab",
 678                 "PNY/Datafab CF+SM Reader",
 679                 US_SC_SCSI, US_PR_DATAFAB, NULL,
 680                 0 ),
 681
 682 UNUSUAL_DEV( 0x07c4, 0xa006, 0x0000, 0xffff,
 683                 "Simple Tech/Datafab",
 684                 "Simple Tech/Datafab CF+SM Reader",
 685                 US_SC_SCSI, US_PR_DATAFAB, NULL,
 686                 0 ),
 687 #endif
 688
 689 #ifdef CONFIG_USB_STORAGE_SDDR55
 690 /* Contributed by Peter Waechtler */
 691 UNUSUAL_DEV( 0x07c4, 0xa103, 0x0000, 0x9999,
 692                 "Datafab",
 693                 "MDSM-B reader",
 694                 US_SC_SCSI, US_PR_SDDR55, NULL,
 695                 US_FL_FIX_INQUIRY ),
 696 #endif
 697
 698 #ifdef CONFIG_USB_STORAGE_DATAFAB
 699 /* Submitted by Olaf Hering <olh@suse.de> */
 700 UNUSUAL_DEV(  0x07c4, 0xa109, 0x0000, 0xffff,
 701                 "Datafab Systems, Inc.",
 702                 "USB to CF + SM Combo (LC1)",
 703                 US_SC_SCSI, US_PR_DATAFAB, NULL,
 704                 0 ),
 705 #endif
 706 #ifdef CONFIG_USB_STORAGE_SDDR55
 707 /* SM part - aeb <Andries.Brouwer@cwi.nl> */
 708 UNUSUAL_DEV(  0x07c4, 0xa109, 0x0000, 0xffff,
 709                 "Datafab Systems, Inc.",
 710                 "USB to CF + SM Combo (LC1)",
 711                 US_SC_SCSI, US_PR_SDDR55, NULL,
 712                 US_FL_SINGLE_LUN ),
 713 #endif
 714
 715 /* Datafab KECF-USB / Sagatek DCS-CF / Simpletech Flashlink UCF-100
 716  * Only revision 1.13 tested (same for all of the above devices,
 717  * based on the Datafab DF-UG-07 chip).  Needed for US_FL_FIX_INQUIRY.
 718  * Submitted by Marek Michalkiewicz <marekm@amelek.gda.pl>.
 719  * See also http://martin.wilck.bei.t-online.de/#kecf .
 720  */
 721 UNUSUAL_DEV(  0x07c4, 0xa400, 0x0000, 0xffff,
 722                 "Datafab",
 723                 "KECF-USB",
 724                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 725                 US_FL_FIX_INQUIRY ),
 726
 727 /* Casio QV 2x00/3x00/4000/8000 digital still cameras are not conformant
 728  * to the USB storage specification in two ways:
 729  * - They tell us they are using transport protocol CBI. In reality they
 730  *   are using transport protocol CB.
 731  * - They don't like the INQUIRY command. So we must handle this command
 732  *   of the SCSI layer ourselves.
 733  * - Some cameras with idProduct=0x1001 and bcdDevice=0x1000 have
 734  *   bInterfaceProtocol=0x00 (US_PR_CBI) while others have 0x01 (US_PR_CB).
 735  *   So don't remove the US_PR_CB override!
 736  * - Cameras with bcdDevice=0x9009 require the US_SC_8070 override.
 737  */
 738 UNUSUAL_DEV( 0x07cf, 0x1001, 0x1000, 0x9999,
 739                 "Casio",
 740                 "QV DigitalCamera",
 741                 US_SC_8070, US_PR_CB, NULL,
 742                 US_FL_NEED_OVERRIDE | US_FL_FIX_INQUIRY ),
 743
 744 /* Submitted by Hartmut Wahl <hwahl@hwahl.de>*/
 745 UNUSUAL_DEV( 0x0839, 0x000a, 0x0001, 0x0001,
 746                 "Samsung",
 747                 "Digimax 410",
 748                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 749                 US_FL_FIX_INQUIRY),
 750
 751 /* Entry and supporting patch by Theodore Kilgore <kilgota@auburn.edu>.
 752  * Flag will support Bulk devices which use a standards-violating 32-byte
 753  * Command Block Wrapper. Here, the "DC2MEGA" cameras (several brands) with
 754  * Grandtech GT892x chip, which request "Proprietary SCSI Bulk" support.
 755  */
 756
 757 UNUSUAL_DEV(  0x084d, 0x0011, 0x0110, 0x0110,
 758                 "Grandtech",
 759                 "DC2MEGA",
 760                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 761                 US_FL_BULK32),
 762
 763
 764 /* Entry needed for flags. Moreover, all devices with this ID use
 765  * bulk-only transport, but _some_ falsely report Control/Bulk instead.
 766  * One example is "Trumpion Digital Research MYMP3".
 767  * Submitted by Bjoern Brill <brill(at)fs.math.uni-frankfurt.de>
 768  */
 769 UNUSUAL_DEV(  0x090a, 0x1001, 0x0100, 0x0100,
 770                 "Trumpion",
 771                 "t33520 USB Flash Card Controller",
 772                 US_SC_DEVICE, US_PR_BULK, NULL,
 773                 US_FL_NEED_OVERRIDE ),
 774
 775 /* Trumpion Microelectronics MP3 player (felipe_alfaro@linuxmail.org) */
 776 UNUSUAL_DEV( 0x090a, 0x1200, 0x0000, 0x9999,
 777                 "Trumpion",
 778                 "MP3 player",
 779                 US_SC_RBC, US_PR_BULK, NULL,
 780                 0 ),
 781
 782 /* aeb */
 783 UNUSUAL_DEV( 0x090c, 0x1132, 0x0000, 0xffff,
 784                 "Feiya",
 785                 "5-in-1 Card Reader",
 786                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 787                 US_FL_FIX_CAPACITY ),
 788
 789 /* This Pentax still camera is not conformant
 790  * to the USB storage specification: -
 791  * - It does not like the INQUIRY command. So we must handle this command
 792  *   of the SCSI layer ourselves.
 793  * Tested on Rev. 10.00 (0x1000)
 794  * Submitted by James Courtier-Dutton <James@superbug.demon.co.uk>
 795  */
 796 UNUSUAL_DEV( 0x0a17, 0x0004, 0x1000, 0x1000,
 797                 "Pentax",
 798                 "Optio 2/3/400",
 799                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 800                 US_FL_FIX_INQUIRY ),
 801
 802
 803 /* Submitted by Per Winkvist <per.winkvist@uk.com> */
 804 UNUSUAL_DEV( 0x0a17, 0x006, 0x0000, 0xffff,
 805                 "Pentax",
 806                 "Optio S/S4",
 807                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 808                 US_FL_FIX_INQUIRY ),
 809
 810 #ifdef CONFIG_USB_STORAGE_ISD200
 811 UNUSUAL_DEV(  0x0bf6, 0xa001, 0x0100, 0x0110,
 812                 "ATI",
 813                 "USB Cable 205",
 814                 US_SC_ISD200, US_PR_BULK, isd200_Initialization,
 815                 0 ),
 816 #endif
 817
 818 #ifdef CONFIG_USB_STORAGE_DATAFAB
 819 UNUSUAL_DEV( 0x0c0b, 0xa109, 0x0000, 0xffff,
 820                "Acomdata",
 821                "CF",
 822                US_SC_SCSI, US_PR_DATAFAB, NULL,
 823                US_FL_SINGLE_LUN ),
 824 #endif
 825 #ifdef CONFIG_USB_STORAGE_SDDR55
 826 UNUSUAL_DEV( 0x0c0b, 0xa109, 0x0000, 0xffff,
 827                "Acomdata",
 828                "SM",
 829                US_SC_SCSI, US_PR_SDDR55, NULL,
 830                US_FL_SINGLE_LUN ),
 831 #endif
 832
 833 /* Submitted by Joris Struyve <joris@struyve.be> */
 834 UNUSUAL_DEV( 0x0d96, 0x410a, 0x0001, 0xffff,
 835                 "Medion",
 836                 "MD 7425",
 837                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 838                 US_FL_FIX_INQUIRY),
 839
 840 /*
 841  * Entry for Jenoptik JD 5200z3
 842  *
 843  * email: car.busse@gmx.de
 844  */
 845 UNUSUAL_DEV(  0x0d96, 0x5200, 0x0001, 0x0200,
 846                 "Jenoptik",
 847                 "JD 5200 z3",
 848                 US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY),
 849
 850 /* Reported by Lubomir Blaha <tritol@trilogic.cz>
 851  * I _REALLY_ don't know what 3rd, 4th number and all defines mean, but this
 852  * works for me. Can anybody correct these values? (I able to test corrected
 853  * version.)
 854  */
 855 UNUSUAL_DEV( 0x0dd8, 0x1060, 0x0000, 0xffff,
 856                 "Netac",
 857                 "USB-CF-Card",
 858                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 859                 US_FL_FIX_INQUIRY ),
 860
 861 /* Patch by Stephan Walter <stephan.walter@epfl.ch>
 862  * I don't know why, but it works... */
 863 UNUSUAL_DEV( 0x0dda, 0x0001, 0x0012, 0x0012,
 864                 "WINWARD",
 865                 "Music Disk",
 866                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 867                 US_FL_IGNORE_RESIDUE ),
 868
 869 /* Submitted by Antoine Mairesse <antoine.mairesse@free.fr> */
 870 UNUSUAL_DEV( 0x0ed1, 0x6660, 0x0100, 0x0300,
 871                 "USB",
 872                 "Solid state disk",
 873                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 874                 US_FL_FIX_INQUIRY ),
 875
 876 /* Submitted by Daniel Drake <dsd@gentoo.org>
 877  * Reported by dayul on the Gentoo Forums */
 878 UNUSUAL_DEV(  0x0ea0, 0x2168, 0x0110, 0x0110,
 879                 "Ours Technology",
 880                 "Flash Disk",
 881                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 882                 US_FL_IGNORE_RESIDUE ),
 883
 884 /* Reported by Rastislav Stanik <rs_kernel@yahoo.com> */
 885 UNUSUAL_DEV(  0x0ea0, 0x6828, 0x0110, 0x0110,
 886                 "USB",
 887                 "Flash Disk",
 888                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 889                 US_FL_IGNORE_RESIDUE ),
 890
 891 /* Reported by Kevin Cernekee <kpc-usbdev@gelato.uiuc.edu>
 892  * Tested on hardware version 1.10.
 893  * Entry is needed only for the initializer function override.
 894  */
 895 UNUSUAL_DEV(  0x1019, 0x0c55, 0x0000, 0x9999,
 896                 "Desknote",
 897                 "UCR-61S2B",
 898                 US_SC_DEVICE, US_PR_DEVICE, usb_stor_ucr61s2b_init,
 899                 0 ),
 900
 901 /* Reported by Kotrla Vitezslav <kotrla@ceb.cz> */
 902 UNUSUAL_DEV(  0x1370, 0x6828, 0x0110, 0x0110,
 903                 "SWISSBIT",
 904                 "Black Silver",
 905                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 906                 US_FL_IGNORE_RESIDUE ),
 907
 908 #ifdef CONFIG_USB_STORAGE_SDDR55
 909 UNUSUAL_DEV(  0x55aa, 0xa103, 0x0000, 0x9999,
 910                 "Sandisk",
 911                 "ImageMate SDDR55",
 912                 US_SC_SCSI, US_PR_SDDR55, NULL,
 913                 US_FL_SINGLE_LUN),
 914 #endif