ftp://ftp.kernel.org/pub/linux/kernel/v2.6/linux-2.6.6.tar.bz2
[linux-2.6.git] / include / asm-sparc / sbus.h
1 /* $Id: sbus.h,v 1.22 2000/02/18 13:50:50 davem Exp $
2  * sbus.h:  Defines for the Sun SBus.
3  *
4  * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
5  */
6
7 #ifndef _SPARC_SBUS_H
8 #define _SPARC_SBUS_H
9
10 #include <linux/ioport.h>
11
12 #include <asm/oplib.h>
13 /* #include <asm/iommu.h> */ /* Unused since we use opaque iommu (|io-unit) */
14 #include <asm/scatterlist.h>
15
16 /* We scan which devices are on the SBus using the PROM node device
17  * tree.  SBus devices are described in two different ways.  You can
18  * either get an absolute address at which to access the device, or
19  * you can get a SBus 'slot' number and an offset within that slot.
20  */
21
22 /* The base address at which to calculate device OBIO addresses. */
23 #define SUN_SBUS_BVADDR        0xf8000000
24 #define SBUS_OFF_MASK          0x01ffffff
25
26 /* These routines are used to calculate device address from slot
27  * numbers + offsets, and vice versa.
28  */
29
30 extern __inline__ unsigned long sbus_devaddr(int slotnum, unsigned long offset)
31 {
32   return (unsigned long) (SUN_SBUS_BVADDR+((slotnum)<<25)+(offset));
33 }
34
35 extern __inline__ int sbus_dev_slot(unsigned long dev_addr)
36 {
37   return (int) (((dev_addr)-SUN_SBUS_BVADDR)>>25);
38 }
39
40 struct sbus_bus;
41
42 /* Linux SBUS device tables */
43 struct sbus_dev {
44         struct sbus_bus *bus;       /* Back ptr to sbus */
45         struct sbus_dev *next;      /* next device on this SBus or null */
46         struct sbus_dev *child;     /* For ledma and espdma on sun4m */
47         struct sbus_dev *parent;    /* Parent device if not toplevel */
48         int prom_node;              /* PROM device tree node for this device */
49         char prom_name[64];         /* PROM device name */
50         int slot;
51
52         struct resource resource[PROMREG_MAX];
53
54         struct linux_prom_registers reg_addrs[PROMREG_MAX];
55         int num_registers, ranges_applied;
56
57         struct linux_prom_ranges device_ranges[PROMREG_MAX];
58         int num_device_ranges;
59
60         unsigned int irqs[4];
61         int num_irqs;
62 };
63
64 /* This struct describes the SBus(s) found on this machine. */
65 struct sbus_bus {
66         void                    *iommu;         /* Opaque IOMMU cookie */
67         struct sbus_dev         *devices;       /* Link to devices on this SBus */
68         struct sbus_bus         *next;          /* next SBus, if more than one SBus */
69         int                     prom_node;      /* PROM device tree node for this SBus */
70         char                    prom_name[64];  /* Usually "sbus" or "sbi" */
71         int                     clock_freq;
72
73         struct linux_prom_ranges sbus_ranges[PROMREG_MAX];
74         int num_sbus_ranges;
75
76         int devid;
77         int board;
78 };
79
80 extern struct sbus_bus *sbus_root;
81
82 extern __inline__ int
83 sbus_is_slave(struct sbus_dev *dev)
84 {
85         /* XXX Have to write this for sun4c's */
86         return 0;
87 }
88
89 /* Device probing routines could find these handy */
90 #define for_each_sbus(bus) \
91         for((bus) = sbus_root; (bus); (bus)=(bus)->next)
92
93 #define for_each_sbusdev(device, bus) \
94         for((device) = (bus)->devices; (device); (device)=(device)->next)
95         
96 #define for_all_sbusdev(device, bus) \
97         for ((bus) = sbus_root; (bus); (bus) = (bus)->next) \
98                 for ((device) = (bus)->devices; (device); (device) = (device)->next)
99
100 /* Driver DVMA interfaces. */
101 #define sbus_can_dma_64bit(sdev)        (0) /* actually, sparc_cpu_model==sun4d */
102 #define sbus_can_burst64(sdev)          (0) /* actually, sparc_cpu_model==sun4d */
103 extern void sbus_set_sbus64(struct sbus_dev *, int);
104
105 /* These yield IOMMU mappings in consistent mode. */
106 extern void *sbus_alloc_consistent(struct sbus_dev *, long, u32 *dma_addrp);
107 extern void sbus_free_consistent(struct sbus_dev *, long, void *, u32);
108
109 #define SBUS_DMA_BIDIRECTIONAL  0
110 #define SBUS_DMA_TODEVICE       1
111 #define SBUS_DMA_FROMDEVICE     2
112 #define SBUS_DMA_NONE           3
113
114 /* All the rest use streaming mode mappings. */
115 extern dma_addr_t sbus_map_single(struct sbus_dev *, void *, size_t, int);
116 extern void sbus_unmap_single(struct sbus_dev *, dma_addr_t, size_t, int);
117 extern int sbus_map_sg(struct sbus_dev *, struct scatterlist *, int, int);
118 extern void sbus_unmap_sg(struct sbus_dev *, struct scatterlist *, int, int);
119
120 /* Finally, allow explicit synchronization of streamable mappings. */
121 extern void sbus_dma_sync_single_for_cpu(struct sbus_dev *, dma_addr_t, size_t, int);
122 #define sbus_dma_sync_single sbus_dma_sync_single_for_cpu
123 extern void sbus_dma_sync_single_for_device(struct sbus_dev *, dma_addr_t, size_t, int);
124 extern void sbus_dma_sync_sg_for_cpu(struct sbus_dev *, struct scatterlist *, int, int);
125 #define sbus_dma_sync_sg sbus_dma_sync_sg_for_cpu
126 extern void sbus_dma_sync_sg_for_device(struct sbus_dev *, struct scatterlist *, int, int);
127
128 /* Eric Brower (ebrower@usa.net)
129  * Translate SBus interrupt levels to ino values--
130  * this is used when converting sbus "interrupts" OBP 
131  * node values to "intr" node values, and is platform 
132  * dependent.  If only we could call OBP with 
133  * "sbus-intr>cpu (sbint -- ino)" from kernel...
134  * See .../drivers/sbus/sbus.c for details.
135  */
136 BTFIXUPDEF_CALL(unsigned int, sbint_to_irq, struct sbus_dev *sdev, unsigned int)
137 #define sbint_to_irq(sdev, sbint) BTFIXUP_CALL(sbint_to_irq)(sdev, sbint)
138
139 #endif /* !(_SPARC_SBUS_H) */