This commit was manufactured by cvs2svn to create branch 'vserver'.
[linux-2.6.git] / include / net / ieee80211.h
1 /*
2  * Merged with mainline ieee80211.h in Aug 2004.  Original ieee802_11
3  * remains copyright by the original authors
4  *
5  * Portions of the merged code are based on Host AP (software wireless
6  * LAN access point) driver for Intersil Prism2/2.5/3.
7  *
8  * Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen
9  * <jkmaline@cc.hut.fi>
10  * Copyright (c) 2002-2003, Jouni Malinen <jkmaline@cc.hut.fi>
11  *
12  * Adaption to a generic IEEE 802.11 stack by James Ketrenos
13  * <jketreno@linux.intel.com>
14  * Copyright (c) 2004, Intel Corporation
15  *
16  * This program is free software; you can redistribute it and/or modify
17  * it under the terms of the GNU General Public License version 2 as
18  * published by the Free Software Foundation. See README and COPYING for
19  * more details.
20  */
21 #ifndef IEEE80211_H
22 #define IEEE80211_H
23
24 #include <linux/if_ether.h> /* ETH_ALEN */
25 #include <linux/kernel.h>   /* ARRAY_SIZE */
26
27 #if WIRELESS_EXT < 17
28 #define IW_QUAL_QUAL_INVALID   0x10
29 #define IW_QUAL_LEVEL_INVALID  0x20
30 #define IW_QUAL_NOISE_INVALID  0x40
31 #define IW_QUAL_QUAL_UPDATED   0x1
32 #define IW_QUAL_LEVEL_UPDATED  0x2
33 #define IW_QUAL_NOISE_UPDATED  0x4
34 #endif
35
36 #define IEEE80211_DATA_LEN              2304
37 /* Maximum size for the MA-UNITDATA primitive, 802.11 standard section
38    6.2.1.1.2.
39
40    The figure in section 7.1.2 suggests a body size of up to 2312
41    bytes is allowed, which is a bit confusing, I suspect this
42    represents the 2304 bytes of real data, plus a possible 8 bytes of
43    WEP IV and ICV. (this interpretation suggested by Ramiro Barreiro) */
44
45
46 #define IEEE80211_HLEN                  30
47 #define IEEE80211_FRAME_LEN             (IEEE80211_DATA_LEN + IEEE80211_HLEN)
48
49 struct ieee80211_hdr {
50         u16 frame_ctl;
51         u16 duration_id;
52         u8 addr1[ETH_ALEN];
53         u8 addr2[ETH_ALEN];
54         u8 addr3[ETH_ALEN];
55         u16 seq_ctl;
56         u8 addr4[ETH_ALEN];
57 } __attribute__ ((packed));
58
59 struct ieee80211_hdr_3addr {
60         u16 frame_ctl;
61         u16 duration_id;
62         u8 addr1[ETH_ALEN];
63         u8 addr2[ETH_ALEN];
64         u8 addr3[ETH_ALEN];
65         u16 seq_ctl;
66 } __attribute__ ((packed));
67
68 enum eap_type {
69         EAP_PACKET = 0,
70         EAPOL_START,
71         EAPOL_LOGOFF,
72         EAPOL_KEY,
73         EAPOL_ENCAP_ASF_ALERT
74 };
75
76 static const char *eap_types[] = {
77         [EAP_PACKET]            = "EAP-Packet",
78         [EAPOL_START]           = "EAPOL-Start",
79         [EAPOL_LOGOFF]          = "EAPOL-Logoff",
80         [EAPOL_KEY]             = "EAPOL-Key",
81         [EAPOL_ENCAP_ASF_ALERT] = "EAPOL-Encap-ASF-Alert"
82 };
83
84 static inline const char *eap_get_type(int type)
85 {
86         return (type >= ARRAY_SIZE(eap_types)) ? "Unknown" : eap_types[type];
87 }
88
89 struct eapol {
90         u8 snap[6];
91         u16 ethertype;
92         u8 version;
93         u8 type;
94         u16 length;
95 } __attribute__ ((packed));
96
97 #define IEEE80211_3ADDR_LEN 24
98 #define IEEE80211_4ADDR_LEN 30
99 #define IEEE80211_FCS_LEN    4
100
101 #define MIN_FRAG_THRESHOLD     256U
102 #define MAX_FRAG_THRESHOLD     2346U
103
104 /* Frame control field constants */
105 #define IEEE80211_FCTL_VERS             0x0002
106 #define IEEE80211_FCTL_FTYPE            0x000c
107 #define IEEE80211_FCTL_STYPE            0x00f0
108 #define IEEE80211_FCTL_TODS             0x0100
109 #define IEEE80211_FCTL_FROMDS           0x0200
110 #define IEEE80211_FCTL_MOREFRAGS        0x0400
111 #define IEEE80211_FCTL_RETRY            0x0800
112 #define IEEE80211_FCTL_PM               0x1000
113 #define IEEE80211_FCTL_MOREDATA 0x2000
114 #define IEEE80211_FCTL_WEP              0x4000
115 #define IEEE80211_FCTL_ORDER            0x8000
116
117 #define IEEE80211_FTYPE_MGMT            0x0000
118 #define IEEE80211_FTYPE_CTL             0x0004
119 #define IEEE80211_FTYPE_DATA            0x0008
120
121 /* management */
122 #define IEEE80211_STYPE_ASSOC_REQ       0x0000
123 #define IEEE80211_STYPE_ASSOC_RESP      0x0010
124 #define IEEE80211_STYPE_REASSOC_REQ     0x0020
125 #define IEEE80211_STYPE_REASSOC_RESP    0x0030
126 #define IEEE80211_STYPE_PROBE_REQ       0x0040
127 #define IEEE80211_STYPE_PROBE_RESP      0x0050
128 #define IEEE80211_STYPE_BEACON          0x0080
129 #define IEEE80211_STYPE_ATIM            0x0090
130 #define IEEE80211_STYPE_DISASSOC        0x00A0
131 #define IEEE80211_STYPE_AUTH            0x00B0
132 #define IEEE80211_STYPE_DEAUTH          0x00C0
133
134 /* control */
135 #define IEEE80211_STYPE_PSPOLL          0x00A0
136 #define IEEE80211_STYPE_RTS             0x00B0
137 #define IEEE80211_STYPE_CTS             0x00C0
138 #define IEEE80211_STYPE_ACK             0x00D0
139 #define IEEE80211_STYPE_CFEND           0x00E0
140 #define IEEE80211_STYPE_CFENDACK        0x00F0
141
142 /* data */
143 #define IEEE80211_STYPE_DATA            0x0000
144 #define IEEE80211_STYPE_DATA_CFACK      0x0010
145 #define IEEE80211_STYPE_DATA_CFPOLL     0x0020
146 #define IEEE80211_STYPE_DATA_CFACKPOLL  0x0030
147 #define IEEE80211_STYPE_NULLFUNC        0x0040
148 #define IEEE80211_STYPE_CFACK           0x0050
149 #define IEEE80211_STYPE_CFPOLL          0x0060
150 #define IEEE80211_STYPE_CFACKPOLL       0x0070
151
152 #define IEEE80211_SCTL_FRAG             0x000F
153 #define IEEE80211_SCTL_SEQ              0xFFF0
154
155
156 /* debug macros */
157
158 #ifdef CONFIG_IEEE80211_DEBUG
159 extern u32 ieee80211_debug_level;
160 #define IEEE80211_DEBUG(level, fmt, args...) \
161 do { if (ieee80211_debug_level & (level)) \
162   printk(KERN_DEBUG "ieee80211: %c %s " fmt, \
163          in_interrupt() ? 'I' : 'U', __FUNCTION__ , ## args); } while (0)
164 #else
165 #define IEEE80211_DEBUG(level, fmt, args...) do {} while (0)
166 #endif  /* CONFIG_IEEE80211_DEBUG */
167
168 /*
169  * To use the debug system;
170  *
171  * If you are defining a new debug classification, simply add it to the #define
172  * list here in the form of:
173  *
174  * #define IEEE80211_DL_xxxx VALUE
175  *
176  * shifting value to the left one bit from the previous entry.  xxxx should be
177  * the name of the classification (for example, WEP)
178  *
179  * You then need to either add a IEEE80211_xxxx_DEBUG() macro definition for your
180  * classification, or use IEEE80211_DEBUG(IEEE80211_DL_xxxx, ...) whenever you want
181  * to send output to that classification.
182  *
183  * To add your debug level to the list of levels seen when you perform
184  *
185  * % cat /proc/net/ipw/debug_level
186  *
187  * you simply need to add your entry to the ipw_debug_levels array.
188  *
189  * If you do not see debug_level in /proc/net/ipw then you do not have
190  * CONFIG_IEEE80211_DEBUG defined in your kernel configuration
191  *
192  */
193
194 #define IEEE80211_DL_INFO          (1<<0)
195 #define IEEE80211_DL_WX            (1<<1)
196 #define IEEE80211_DL_SCAN          (1<<2)
197 #define IEEE80211_DL_STATE         (1<<3)
198 #define IEEE80211_DL_MGMT          (1<<4)
199 #define IEEE80211_DL_FRAG          (1<<5)
200 #define IEEE80211_DL_EAP           (1<<6)
201 #define IEEE80211_DL_DROP          (1<<7)
202
203 #define IEEE80211_DL_TX            (1<<8)
204 #define IEEE80211_DL_RX            (1<<9)
205
206 #define IEEE80211_ERROR(f, a...) printk(KERN_ERR "ieee80211: " f, ## a)
207 #define IEEE80211_WARNING(f, a...) printk(KERN_WARNING "ieee80211: " f, ## a)
208 #define IEEE80211_DEBUG_INFO(f, a...)   IEEE80211_DEBUG(IEEE80211_DL_INFO, f, ## a)
209
210 #define IEEE80211_DEBUG_WX(f, a...)     IEEE80211_DEBUG(IEEE80211_DL_WX, f, ## a)
211 #define IEEE80211_DEBUG_SCAN(f, a...)   IEEE80211_DEBUG(IEEE80211_DL_SCAN, f, ## a)
212 #define IEEE80211_DEBUG_STATE(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_STATE, f, ## a)
213 #define IEEE80211_DEBUG_MGMT(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_MGMT, f, ## a)
214 #define IEEE80211_DEBUG_FRAG(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_FRAG, f, ## a)
215 #define IEEE80211_DEBUG_EAP(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_EAP, f, ## a)
216 #define IEEE80211_DEBUG_DROP(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_DROP, f, ## a)
217 #define IEEE80211_DEBUG_TX(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_TX, f, ## a)
218 #define IEEE80211_DEBUG_RX(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_RX, f, ## a)
219 #include <linux/netdevice.h>
220 #include <linux/wireless.h>
221 #include <linux/if_arp.h> /* ARPHRD_ETHER */
222
223 #ifndef WIRELESS_SPY
224 #define WIRELESS_SPY            // enable iwspy support
225 #endif
226 #include <net/iw_handler.h>     // new driver API
227
228 #ifndef ETH_P_PAE
229 #define ETH_P_PAE 0x888E /* Port Access Entity (IEEE 802.1X) */
230 #endif /* ETH_P_PAE */
231
232 #define ETH_P_PREAUTH 0x88C7 /* IEEE 802.11i pre-authentication */
233
234 #ifndef ETH_P_80211_RAW
235 #define ETH_P_80211_RAW (ETH_P_ECONET + 1)
236 #endif
237
238 /* IEEE 802.11 defines */
239
240 #define P80211_OUI_LEN 3
241
242 struct ieee80211_snap_hdr {
243
244         u8    dsap;   /* always 0xAA */
245         u8    ssap;   /* always 0xAA */
246         u8    ctrl;   /* always 0x03 */
247         u8    oui[P80211_OUI_LEN];    /* organizational universal id */
248
249 } __attribute__ ((packed));
250
251 #define SNAP_SIZE sizeof(struct ieee80211_snap_hdr)
252
253 #define WLAN_FC_GET_TYPE(fc) ((fc) & IEEE80211_FCTL_FTYPE)
254 #define WLAN_FC_GET_STYPE(fc) ((fc) & IEEE80211_FCTL_STYPE)
255
256 #define WLAN_GET_SEQ_FRAG(seq) ((seq) & IEEE80211_SCTL_FRAG)
257 #define WLAN_GET_SEQ_SEQ(seq)  ((seq) & IEEE80211_SCTL_SEQ)
258
259 /* Authentication algorithms */
260 #define WLAN_AUTH_OPEN 0
261 #define WLAN_AUTH_SHARED_KEY 1
262
263 #define WLAN_AUTH_CHALLENGE_LEN 128
264
265 #define WLAN_CAPABILITY_BSS (1<<0)
266 #define WLAN_CAPABILITY_IBSS (1<<1)
267 #define WLAN_CAPABILITY_CF_POLLABLE (1<<2)
268 #define WLAN_CAPABILITY_CF_POLL_REQUEST (1<<3)
269 #define WLAN_CAPABILITY_PRIVACY (1<<4)
270 #define WLAN_CAPABILITY_SHORT_PREAMBLE (1<<5)
271 #define WLAN_CAPABILITY_PBCC (1<<6)
272 #define WLAN_CAPABILITY_CHANNEL_AGILITY (1<<7)
273
274 /* Status codes */
275 #define WLAN_STATUS_SUCCESS 0
276 #define WLAN_STATUS_UNSPECIFIED_FAILURE 1
277 #define WLAN_STATUS_CAPS_UNSUPPORTED 10
278 #define WLAN_STATUS_REASSOC_NO_ASSOC 11
279 #define WLAN_STATUS_ASSOC_DENIED_UNSPEC 12
280 #define WLAN_STATUS_NOT_SUPPORTED_AUTH_ALG 13
281 #define WLAN_STATUS_UNKNOWN_AUTH_TRANSACTION 14
282 #define WLAN_STATUS_CHALLENGE_FAIL 15
283 #define WLAN_STATUS_AUTH_TIMEOUT 16
284 #define WLAN_STATUS_AP_UNABLE_TO_HANDLE_NEW_STA 17
285 #define WLAN_STATUS_ASSOC_DENIED_RATES 18
286 /* 802.11b */
287 #define WLAN_STATUS_ASSOC_DENIED_NOSHORT 19
288 #define WLAN_STATUS_ASSOC_DENIED_NOPBCC 20
289 #define WLAN_STATUS_ASSOC_DENIED_NOAGILITY 21
290
291 /* Reason codes */
292 #define WLAN_REASON_UNSPECIFIED 1
293 #define WLAN_REASON_PREV_AUTH_NOT_VALID 2
294 #define WLAN_REASON_DEAUTH_LEAVING 3
295 #define WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY 4
296 #define WLAN_REASON_DISASSOC_AP_BUSY 5
297 #define WLAN_REASON_CLASS2_FRAME_FROM_NONAUTH_STA 6
298 #define WLAN_REASON_CLASS3_FRAME_FROM_NONASSOC_STA 7
299 #define WLAN_REASON_DISASSOC_STA_HAS_LEFT 8
300 #define WLAN_REASON_STA_REQ_ASSOC_WITHOUT_AUTH 9
301
302
303 /* Information Element IDs */
304 #define WLAN_EID_SSID 0
305 #define WLAN_EID_SUPP_RATES 1
306 #define WLAN_EID_FH_PARAMS 2
307 #define WLAN_EID_DS_PARAMS 3
308 #define WLAN_EID_CF_PARAMS 4
309 #define WLAN_EID_TIM 5
310 #define WLAN_EID_IBSS_PARAMS 6
311 #define WLAN_EID_CHALLENGE 16
312 #define WLAN_EID_RSN 48
313 #define WLAN_EID_GENERIC 221
314
315 #define IEEE80211_MGMT_HDR_LEN 24
316 #define IEEE80211_DATA_HDR3_LEN 24
317 #define IEEE80211_DATA_HDR4_LEN 30
318
319
320 #define IEEE80211_STATMASK_SIGNAL (1<<0)
321 #define IEEE80211_STATMASK_RSSI (1<<1)
322 #define IEEE80211_STATMASK_NOISE (1<<2)
323 #define IEEE80211_STATMASK_RATE (1<<3)
324 #define IEEE80211_STATMASK_WEMASK 0x7
325
326
327 #define IEEE80211_CCK_MODULATION    (1<<0)
328 #define IEEE80211_OFDM_MODULATION   (1<<1)
329
330 #define IEEE80211_24GHZ_BAND     (1<<0)
331 #define IEEE80211_52GHZ_BAND     (1<<1)
332
333 #define IEEE80211_CCK_RATE_1MB                  0x02
334 #define IEEE80211_CCK_RATE_2MB                  0x04
335 #define IEEE80211_CCK_RATE_5MB                  0x0B
336 #define IEEE80211_CCK_RATE_11MB                 0x16
337 #define IEEE80211_OFDM_RATE_6MB                 0x0C
338 #define IEEE80211_OFDM_RATE_9MB                 0x12
339 #define IEEE80211_OFDM_RATE_12MB                0x18
340 #define IEEE80211_OFDM_RATE_18MB                0x24
341 #define IEEE80211_OFDM_RATE_24MB                0x30
342 #define IEEE80211_OFDM_RATE_36MB                0x48
343 #define IEEE80211_OFDM_RATE_48MB                0x60
344 #define IEEE80211_OFDM_RATE_54MB                0x6C
345 #define IEEE80211_BASIC_RATE_MASK               0x80
346
347 #define IEEE80211_CCK_RATE_1MB_MASK             (1<<0)
348 #define IEEE80211_CCK_RATE_2MB_MASK             (1<<1)
349 #define IEEE80211_CCK_RATE_5MB_MASK             (1<<2)
350 #define IEEE80211_CCK_RATE_11MB_MASK            (1<<3)
351 #define IEEE80211_OFDM_RATE_6MB_MASK            (1<<4)
352 #define IEEE80211_OFDM_RATE_9MB_MASK            (1<<5)
353 #define IEEE80211_OFDM_RATE_12MB_MASK           (1<<6)
354 #define IEEE80211_OFDM_RATE_18MB_MASK           (1<<7)
355 #define IEEE80211_OFDM_RATE_24MB_MASK           (1<<8)
356 #define IEEE80211_OFDM_RATE_36MB_MASK           (1<<9)
357 #define IEEE80211_OFDM_RATE_48MB_MASK           (1<<10)
358 #define IEEE80211_OFDM_RATE_54MB_MASK           (1<<11)
359
360 #define IEEE80211_CCK_RATES_MASK                0x0000000F
361 #define IEEE80211_CCK_BASIC_RATES_MASK  (IEEE80211_CCK_RATE_1MB_MASK | \
362         IEEE80211_CCK_RATE_2MB_MASK)
363 #define IEEE80211_CCK_DEFAULT_RATES_MASK        (IEEE80211_CCK_BASIC_RATES_MASK | \
364         IEEE80211_CCK_RATE_5MB_MASK | \
365         IEEE80211_CCK_RATE_11MB_MASK)
366
367 #define IEEE80211_OFDM_RATES_MASK               0x00000FF0
368 #define IEEE80211_OFDM_BASIC_RATES_MASK (IEEE80211_OFDM_RATE_6MB_MASK | \
369         IEEE80211_OFDM_RATE_12MB_MASK | \
370         IEEE80211_OFDM_RATE_24MB_MASK)
371 #define IEEE80211_OFDM_DEFAULT_RATES_MASK       (IEEE80211_OFDM_BASIC_RATES_MASK | \
372         IEEE80211_OFDM_RATE_9MB_MASK  | \
373         IEEE80211_OFDM_RATE_18MB_MASK | \
374         IEEE80211_OFDM_RATE_36MB_MASK | \
375         IEEE80211_OFDM_RATE_48MB_MASK | \
376         IEEE80211_OFDM_RATE_54MB_MASK)
377 #define IEEE80211_DEFAULT_RATES_MASK (IEEE80211_OFDM_DEFAULT_RATES_MASK | \
378                                 IEEE80211_CCK_DEFAULT_RATES_MASK)
379
380 #define IEEE80211_NUM_OFDM_RATES            8
381 #define IEEE80211_NUM_CCK_RATES             4
382 #define IEEE80211_OFDM_SHIFT_MASK_A         4
383
384
385
386
387 /* NOTE: This data is for statistical purposes; not all hardware provides this
388  *       information for frames received.  Not setting these will not cause
389  *       any adverse affects. */
390 struct ieee80211_rx_stats {
391         u32 mac_time;
392         s8 rssi;
393         u8 signal;
394         u8 noise;
395         u16 rate; /* in 100 kbps */
396         u8 received_channel;
397         u8 control;
398         u8 mask;
399         u8 freq;
400         u16 len;
401 };
402
403 /* IEEE 802.11 requires that STA supports concurrent reception of at least
404  * three fragmented frames. This define can be increased to support more
405  * concurrent frames, but it should be noted that each entry can consume about
406  * 2 kB of RAM and increasing cache size will slow down frame reassembly. */
407 #define IEEE80211_FRAG_CACHE_LEN 4
408
409 struct ieee80211_frag_entry {
410         unsigned long first_frag_time;
411         unsigned int seq;
412         unsigned int last_frag;
413         struct sk_buff *skb;
414         u8 src_addr[ETH_ALEN];
415         u8 dst_addr[ETH_ALEN];
416 };
417
418 struct ieee80211_stats {
419         unsigned int tx_unicast_frames;
420         unsigned int tx_multicast_frames;
421         unsigned int tx_fragments;
422         unsigned int tx_unicast_octets;
423         unsigned int tx_multicast_octets;
424         unsigned int tx_deferred_transmissions;
425         unsigned int tx_single_retry_frames;
426         unsigned int tx_multiple_retry_frames;
427         unsigned int tx_retry_limit_exceeded;
428         unsigned int tx_discards;
429         unsigned int rx_unicast_frames;
430         unsigned int rx_multicast_frames;
431         unsigned int rx_fragments;
432         unsigned int rx_unicast_octets;
433         unsigned int rx_multicast_octets;
434         unsigned int rx_fcs_errors;
435         unsigned int rx_discards_no_buffer;
436         unsigned int tx_discards_wrong_sa;
437         unsigned int rx_discards_undecryptable;
438         unsigned int rx_message_in_msg_fragments;
439         unsigned int rx_message_in_bad_msg_fragments;
440 };
441
442 struct ieee80211_device;
443
444 #define SEC_KEY_1         (1<<0)
445 #define SEC_KEY_2         (1<<1)
446 #define SEC_KEY_3         (1<<2)
447 #define SEC_KEY_4         (1<<3)
448 #define SEC_ACTIVE_KEY    (1<<4)
449 #define SEC_AUTH_MODE     (1<<5)
450 #define SEC_UNICAST_GROUP (1<<6)
451 #define SEC_LEVEL         (1<<7)
452 #define SEC_ENABLED       (1<<8)
453
454 #define SEC_LEVEL_0      0 /* None */
455 #define SEC_LEVEL_1      1 /* WEP 40 and 104 bit */
456 #define SEC_LEVEL_2      2 /* Level 1 + TKIP */
457 #define SEC_LEVEL_2_CKIP 3 /* Level 1 + CKIP */
458 #define SEC_LEVEL_3      4 /* Level 2 + CCMP */
459
460 #define WEP_KEYS 4
461 #define WEP_KEY_LEN 13
462
463 struct ieee80211_security {
464         u16 active_key:2,
465             enabled:1,
466             auth_mode:2,
467             auth_algo:4,
468             unicast_uses_group:1;
469         u8 key_sizes[WEP_KEYS];
470         u8 keys[WEP_KEYS][WEP_KEY_LEN];
471         u8 level;
472         u16 flags;
473 } __attribute__ ((packed));
474
475
476 /*
477
478  802.11 data frame from AP
479
480       ,-------------------------------------------------------------------.
481 Bytes |  2   |  2   |    6    |    6    |    6    |  2   | 0..2312 |   4  |
482       |------|------|---------|---------|---------|------|---------|------|
483 Desc. | ctrl | dura |  DA/RA  |   TA    |    SA   | Sequ |  frame  |  fcs |
484       |      | tion | (BSSID) |         |         | ence |  data   |      |
485       `-------------------------------------------------------------------'
486
487 Total: 28-2340 bytes
488
489 */
490
491 struct ieee80211_header_data {
492         u16 frame_ctl;
493         u16 duration_id;
494         u8 addr1[6];
495         u8 addr2[6];
496         u8 addr3[6];
497         u16 seq_ctrl;
498 };
499
500 #define BEACON_PROBE_SSID_ID_POSITION 12
501
502 /* Management Frame Information Element Types */
503 #define MFIE_TYPE_SSID       0
504 #define MFIE_TYPE_RATES      1
505 #define MFIE_TYPE_FH_SET     2
506 #define MFIE_TYPE_DS_SET     3
507 #define MFIE_TYPE_CF_SET     4
508 #define MFIE_TYPE_TIM        5
509 #define MFIE_TYPE_IBSS_SET   6
510 #define MFIE_TYPE_CHALLENGE  16
511 #define MFIE_TYPE_RSN        48
512 #define MFIE_TYPE_RATES_EX   50
513 #define MFIE_TYPE_GENERIC    221
514
515 struct ieee80211_info_element_hdr {
516         u8 id;
517         u8 len;
518 } __attribute__ ((packed));
519
520 struct ieee80211_info_element {
521         u8 id;
522         u8 len;
523         u8 data[0];
524 } __attribute__ ((packed));
525
526 /*
527  * These are the data types that can make up management packets
528  *
529         u16 auth_algorithm;
530         u16 auth_sequence;
531         u16 beacon_interval;
532         u16 capability;
533         u8 current_ap[ETH_ALEN];
534         u16 listen_interval;
535         struct {
536                 u16 association_id:14, reserved:2;
537         } __attribute__ ((packed));
538         u32 time_stamp[2];
539         u16 reason;
540         u16 status;
541 */
542
543 struct ieee80211_authentication {
544         struct ieee80211_header_data header;
545         u16 algorithm;
546         u16 transaction;
547         u16 status;
548         struct ieee80211_info_element info_element;
549 } __attribute__ ((packed));
550
551
552 struct ieee80211_probe_response {
553         struct ieee80211_header_data header;
554         u32 time_stamp[2];
555         u16 beacon_interval;
556         u16 capability;
557         struct ieee80211_info_element info_element;
558 } __attribute__ ((packed));
559
560 struct ieee80211_assoc_request_frame {
561         u16 capability;
562         u16 listen_interval;
563         u8 current_ap[ETH_ALEN];
564         struct ieee80211_info_element info_element;
565 } __attribute__ ((packed));
566
567 struct ieee80211_assoc_response_frame {
568         struct ieee80211_hdr_3addr header;
569         u16 capability;
570         u16 status;
571         u16 aid;
572         struct ieee80211_info_element info_element; /* supported rates */
573 } __attribute__ ((packed));
574
575
576 struct ieee80211_txb {
577         u8 nr_frags;
578         u8 encrypted;
579         u16 reserved;
580         u16 frag_size;
581         u16 payload_size;
582         struct sk_buff *fragments[0];
583 };
584
585
586 /* SWEEP TABLE ENTRIES NUMBER*/
587 #define MAX_SWEEP_TAB_ENTRIES             42
588 #define MAX_SWEEP_TAB_ENTRIES_PER_PACKET  7
589 /* MAX_RATES_LENGTH needs to be 12.  The spec says 8, and many APs
590  * only use 8, and then use extended rates for the remaining supported
591  * rates.  Other APs, however, stick all of their supported rates on the
592  * main rates information element... */
593 #define MAX_RATES_LENGTH                  ((u8)12)
594 #define MAX_RATES_EX_LENGTH               ((u8)16)
595 #define MAX_NETWORK_COUNT                  128
596
597 #define CRC_LENGTH                 4U
598
599 #define MAX_WPA_IE_LEN 64
600
601 #define NETWORK_EMPTY_ESSID (1<<0)
602 #define NETWORK_HAS_OFDM    (1<<1)
603 #define NETWORK_HAS_CCK     (1<<2)
604
605 struct ieee80211_network {
606         /* These entries are used to identify a unique network */
607         u8 bssid[ETH_ALEN];
608         u8 channel;
609         /* Ensure null-terminated for any debug msgs */
610         u8 ssid[IW_ESSID_MAX_SIZE + 1];
611         u8 ssid_len;
612
613         /* These are network statistics */
614         struct ieee80211_rx_stats stats;
615         u16 capability;
616         u8 rates[MAX_RATES_LENGTH];
617         u8 rates_len;
618         u8 rates_ex[MAX_RATES_EX_LENGTH];
619         u8 rates_ex_len;
620         unsigned long last_scanned;
621         u8 mode;
622         u8 flags;
623         u32 last_associate;
624         u32 time_stamp[2];
625         u16 beacon_interval;
626         u16 listen_interval;
627         u16 atim_window;
628         u8 wpa_ie[MAX_WPA_IE_LEN];
629         size_t wpa_ie_len;
630         u8 rsn_ie[MAX_WPA_IE_LEN];
631         size_t rsn_ie_len;
632         struct list_head list;
633 };
634
635 enum ieee80211_state {
636         IEEE80211_UNINITIALIZED = 0,
637         IEEE80211_INITIALIZED,
638         IEEE80211_ASSOCIATING,
639         IEEE80211_ASSOCIATED,
640         IEEE80211_AUTHENTICATING,
641         IEEE80211_AUTHENTICATED,
642         IEEE80211_SHUTDOWN
643 };
644
645 #define DEFAULT_MAX_SCAN_AGE (15 * HZ)
646 #define DEFAULT_FTS 2346
647 #define MAC_FMT "%02x:%02x:%02x:%02x:%02x:%02x"
648 #define MAC_ARG(x) ((u8*)(x))[0],((u8*)(x))[1],((u8*)(x))[2],((u8*)(x))[3],((u8*)(x))[4],((u8*)(x))[5]
649
650
651 extern inline int is_broadcast_ether_addr(const u8 *addr)
652 {
653         return ((addr[0] == 0xff) && (addr[1] == 0xff) && (addr[2] == 0xff) &&   \
654                 (addr[3] == 0xff) && (addr[4] == 0xff) && (addr[5] == 0xff));
655 }
656
657 #define CFG_IEEE80211_RESERVE_FCS (1<<0)
658 #define CFG_IEEE80211_COMPUTE_FCS (1<<1)
659
660 struct ieee80211_device {
661         struct net_device *dev;
662
663         /* Bookkeeping structures */
664         struct net_device_stats stats;
665         struct ieee80211_stats ieee_stats;
666
667         /* Probe / Beacon management */
668         struct list_head network_free_list;
669         struct list_head network_list;
670         struct ieee80211_network *networks;
671         int scans;
672         int scan_age;
673
674         int iw_mode; /* operating mode (IW_MODE_*) */
675
676         spinlock_t lock;
677
678         int tx_headroom; /* Set to size of any additional room needed at front
679                           * of allocated Tx SKBs */
680         u32 config;
681
682         /* WEP and other encryption related settings at the device level */
683         int open_wep; /* Set to 1 to allow unencrypted frames */
684
685         int reset_on_keychange; /* Set to 1 if the HW needs to be reset on
686                                  * WEP key changes */
687
688         /* If the host performs {en,de}cryption, then set to 1 */
689         int host_encrypt;
690         int host_decrypt;
691         int ieee802_1x; /* is IEEE 802.1X used */
692
693         /* WPA data */
694         int wpa_enabled;
695         int drop_unencrypted;
696         int tkip_countermeasures;
697         int privacy_invoked;
698         size_t wpa_ie_len;
699         u8 *wpa_ie;
700
701         struct list_head crypt_deinit_list;
702         struct ieee80211_crypt_data *crypt[WEP_KEYS];
703         int tx_keyidx; /* default TX key index (crypt[tx_keyidx]) */
704         struct timer_list crypt_deinit_timer;
705
706         int bcrx_sta_key; /* use individual keys to override default keys even
707                            * with RX of broad/multicast frames */
708
709         /* Fragmentation structures */
710         struct ieee80211_frag_entry frag_cache[IEEE80211_FRAG_CACHE_LEN];
711         unsigned int frag_next_idx;
712         u16 fts; /* Fragmentation Threshold */
713
714         /* Association info */
715         u8 bssid[ETH_ALEN];
716
717         enum ieee80211_state state;
718
719         int mode;       /* A, B, G */
720         int modulation; /* CCK, OFDM */
721         int freq_band;  /* 2.4Ghz, 5.2Ghz, Mixed */
722         int abg_ture;   /* ABG flag              */
723
724         /* Callback functions */
725         void (*set_security)(struct net_device *dev,
726                              struct ieee80211_security *sec);
727         int (*hard_start_xmit)(struct ieee80211_txb *txb,
728                                struct net_device *dev);
729         int (*reset_port)(struct net_device *dev);
730
731         /* This must be the last item so that it points to the data
732          * allocated beyond this structure by alloc_ieee80211 */
733         u8 priv[0];
734 };
735
736 #define IEEE_A            (1<<0)
737 #define IEEE_B            (1<<1)
738 #define IEEE_G            (1<<2)
739 #define IEEE_MODE_MASK    (IEEE_A|IEEE_B|IEEE_G)
740
741 extern inline void *ieee80211_priv(struct net_device *dev)
742 {
743         return ((struct ieee80211_device *)netdev_priv(dev))->priv;
744 }
745
746 extern inline int ieee80211_is_empty_essid(const char *essid, int essid_len)
747 {
748         /* Single white space is for Linksys APs */
749         if (essid_len == 1 && essid[0] == ' ')
750                 return 1;
751
752         /* Otherwise, if the entire essid is 0, we assume it is hidden */
753         while (essid_len) {
754                 essid_len--;
755                 if (essid[essid_len] != '\0')
756                         return 0;
757         }
758
759         return 1;
760 }
761
762 extern inline int ieee80211_is_valid_mode(struct ieee80211_device *ieee, int mode)
763 {
764         /*
765          * It is possible for both access points and our device to support
766          * combinations of modes, so as long as there is one valid combination
767          * of ap/device supported modes, then return success
768          *
769          */
770         if ((mode & IEEE_A) &&
771             (ieee->modulation & IEEE80211_OFDM_MODULATION) &&
772             (ieee->freq_band & IEEE80211_52GHZ_BAND))
773                 return 1;
774
775         if ((mode & IEEE_G) &&
776             (ieee->modulation & IEEE80211_OFDM_MODULATION) &&
777             (ieee->freq_band & IEEE80211_24GHZ_BAND))
778                 return 1;
779
780         if ((mode & IEEE_B) &&
781             (ieee->modulation & IEEE80211_CCK_MODULATION) &&
782             (ieee->freq_band & IEEE80211_24GHZ_BAND))
783                 return 1;
784
785         return 0;
786 }
787
788 extern inline int ieee80211_get_hdrlen(u16 fc)
789 {
790         int hdrlen = 24;
791
792         switch (WLAN_FC_GET_TYPE(fc)) {
793         case IEEE80211_FTYPE_DATA:
794                 if ((fc & IEEE80211_FCTL_FROMDS) && (fc & IEEE80211_FCTL_TODS))
795                         hdrlen = 30; /* Addr4 */
796                 break;
797         case IEEE80211_FTYPE_CTL:
798                 switch (WLAN_FC_GET_STYPE(fc)) {
799                 case IEEE80211_STYPE_CTS:
800                 case IEEE80211_STYPE_ACK:
801                         hdrlen = 10;
802                         break;
803                 default:
804                         hdrlen = 16;
805                         break;
806                 }
807                 break;
808         }
809
810         return hdrlen;
811 }
812
813
814
815 /* ieee80211.c */
816 extern void free_ieee80211(struct net_device *dev);
817 extern struct net_device *alloc_ieee80211(int sizeof_priv);
818
819 extern int ieee80211_set_encryption(struct ieee80211_device *ieee);
820
821 /* ieee80211_tx.c */
822
823
824 extern int ieee80211_xmit(struct sk_buff *skb,
825                           struct net_device *dev);
826 extern void ieee80211_txb_free(struct ieee80211_txb *);
827
828
829 /* ieee80211_rx.c */
830 extern int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
831                         struct ieee80211_rx_stats *rx_stats);
832 extern void ieee80211_rx_mgt(struct ieee80211_device *ieee,
833                              struct ieee80211_hdr *header,
834                              struct ieee80211_rx_stats *stats);
835
836 /* iee80211_wx.c */
837 extern int ieee80211_wx_get_scan(struct ieee80211_device *ieee,
838                                  struct iw_request_info *info,
839                                  union iwreq_data *wrqu, char *key);
840 extern int ieee80211_wx_set_encode(struct ieee80211_device *ieee,
841                                    struct iw_request_info *info,
842                                    union iwreq_data *wrqu, char *key);
843 extern int ieee80211_wx_get_encode(struct ieee80211_device *ieee,
844                                    struct iw_request_info *info,
845                                    union iwreq_data *wrqu, char *key);
846
847
848 extern inline void ieee80211_increment_scans(struct ieee80211_device *ieee)
849 {
850         ieee->scans++;
851 }
852
853 extern inline int ieee80211_get_scans(struct ieee80211_device *ieee)
854 {
855         return ieee->scans;
856 }
857
858 static inline const char *escape_essid(const char *essid, u8 essid_len) {
859         static char escaped[IW_ESSID_MAX_SIZE * 2 + 1];
860         const char *s = essid;
861         char *d = escaped;
862
863         if (ieee80211_is_empty_essid(essid, essid_len)) {
864                 memcpy(escaped, "<hidden>", sizeof("<hidden>"));
865                 return escaped;
866         }
867
868         essid_len = min(essid_len, (u8)IW_ESSID_MAX_SIZE);
869         while (essid_len--) {
870                 if (*s == '\0') {
871                         *d++ = '\\';
872                         *d++ = '0';
873                         s++;
874                 } else {
875                         *d++ = *s++;
876                 }
877         }
878         *d = '\0';
879         return escaped;
880 }
881
882 #endif /* IEEE80211_H */