vserver 2.0 rc7
[linux-2.6.git] / include / scsi / scsi_device.h
1 #ifndef _SCSI_SCSI_DEVICE_H
2 #define _SCSI_SCSI_DEVICE_H
3
4 #include <linux/device.h>
5 #include <linux/list.h>
6 #include <linux/spinlock.h>
7 #include <asm/atomic.h>
8
9 struct request_queue;
10 struct scsi_cmnd;
11 struct scsi_mode_data;
12
13
14 /*
15  * sdev state: If you alter this, you also need to alter scsi_sysfs.c
16  * (for the ascii descriptions) and the state model enforcer:
17  * scsi_lib:scsi_device_set_state().
18  */
19 enum scsi_device_state {
20         SDEV_CREATED = 1,       /* device created but not added to sysfs
21                                  * Only internal commands allowed (for inq) */
22         SDEV_RUNNING,           /* device properly configured
23                                  * All commands allowed */
24         SDEV_CANCEL,            /* beginning to delete device
25                                  * Only error handler commands allowed */
26         SDEV_DEL,               /* device deleted 
27                                  * no commands allowed */
28         SDEV_QUIESCE,           /* Device quiescent.  No block commands
29                                  * will be accepted, only specials (which
30                                  * originate in the mid-layer) */
31         SDEV_OFFLINE,           /* Device offlined (by error handling or
32                                  * user request */
33         SDEV_BLOCK,             /* Device blocked by scsi lld.  No scsi 
34                                  * commands from user or midlayer should be issued
35                                  * to the scsi lld. */
36 };
37
38 struct scsi_device {
39         struct Scsi_Host *host;
40         struct request_queue *request_queue;
41
42         /* the next two are protected by the host->host_lock */
43         struct list_head    siblings;   /* list of all devices on this host */
44         struct list_head    same_target_siblings; /* just the devices sharing same target id */
45
46         /* this is now protected by the request_queue->queue_lock */
47         unsigned int device_busy;       /* commands actually active on
48                                          * low-level. protected by queue_lock. */
49         spinlock_t list_lock;
50         struct list_head cmd_list;      /* queue of in use SCSI Command structures */
51         struct list_head starved_entry;
52         struct scsi_cmnd *current_cmnd; /* currently active command */
53         unsigned short queue_depth;     /* How deep of a queue we want */
54         unsigned short last_queue_full_depth; /* These two are used by */
55         unsigned short last_queue_full_count; /* scsi_track_queue_full() */
56         unsigned long last_queue_full_time;/* don't let QUEUE_FULLs on the same
57                                            jiffie count on our counter, they
58                                            could all be from the same event. */
59
60         unsigned int id, lun, channel;
61
62         unsigned int manufacturer;      /* Manufacturer of device, for using 
63                                          * vendor-specific cmd's */
64         unsigned sector_size;   /* size in bytes */
65
66         void *hostdata;         /* available to low-level driver */
67         char devfs_name[256];   /* devfs junk */
68         char type;
69         char scsi_level;
70         char inq_periph_qual;   /* PQ from INQUIRY data */      
71         unsigned char inquiry_len;      /* valid bytes in 'inquiry' */
72         unsigned char * inquiry;        /* INQUIRY response data */
73         char * vendor;          /* [back_compat] point into 'inquiry' ... */
74         char * model;           /* ... after scan; point to static string */
75         char * rev;             /* ... "nullnullnullnull" before scan */
76         unsigned char current_tag;      /* current tag */
77         struct scsi_target      *sdev_target;   /* used only for single_lun */
78
79         unsigned int    sdev_bflags; /* black/white flags as also found in
80                                  * scsi_devinfo.[hc]. For now used only to
81                                  * pass settings from slave_alloc to scsi
82                                  * core. */
83         unsigned writeable:1;
84         unsigned removable:1;
85         unsigned changed:1;     /* Data invalid due to media change */
86         unsigned busy:1;        /* Used to prevent races */
87         unsigned lockable:1;    /* Able to prevent media removal */
88         unsigned locked:1;      /* Media removal disabled */
89         unsigned borken:1;      /* Tell the Seagate driver to be 
90                                  * painfully slow on this device */
91         unsigned disconnect:1;  /* can disconnect */
92         unsigned soft_reset:1;  /* Uses soft reset option */
93         unsigned sdtr:1;        /* Device supports SDTR messages */
94         unsigned wdtr:1;        /* Device supports WDTR messages */
95         unsigned ppr:1;         /* Device supports PPR messages */
96         unsigned tagged_supported:1;    /* Supports SCSI-II tagged queuing */
97         unsigned simple_tags:1; /* simple queue tag messages are enabled */
98         unsigned ordered_tags:1;/* ordered queue tag messages are enabled */
99         unsigned single_lun:1;  /* Indicates we should only allow I/O to
100                                  * one of the luns for the device at a 
101                                  * time. */
102         unsigned was_reset:1;   /* There was a bus reset on the bus for 
103                                  * this device */
104         unsigned expecting_cc_ua:1; /* Expecting a CHECK_CONDITION/UNIT_ATTN
105                                      * because we did a bus reset. */
106         unsigned use_10_for_rw:1; /* first try 10-byte read / write */
107         unsigned use_10_for_ms:1; /* first try 10-byte mode sense/select */
108         unsigned skip_ms_page_8:1;      /* do not use MODE SENSE page 0x08 */
109         unsigned skip_ms_page_3f:1;     /* do not use MODE SENSE page 0x3f */
110         unsigned use_192_bytes_for_3f:1; /* ask for 192 bytes from page 0x3f */
111         unsigned no_start_on_add:1;     /* do not issue start on add */
112         unsigned allow_restart:1; /* issue START_UNIT in error handler */
113         unsigned no_uld_attach:1; /* disable connecting to upper level drivers */
114         unsigned select_no_atn:1;
115         unsigned fix_capacity:1;        /* READ_CAPACITY is too high by 1 */
116         unsigned retry_hwerror:1;       /* Retry HARDWARE_ERROR */
117
118         unsigned int device_blocked;    /* Device returned QUEUE_FULL. */
119
120         unsigned int max_device_blocked; /* what device_blocked counts down from  */
121 #define SCSI_DEFAULT_DEVICE_BLOCKED     3
122
123         atomic_t iorequest_cnt;
124         atomic_t iodone_cnt;
125         atomic_t ioerr_cnt;
126
127         int timeout;
128
129         struct device           sdev_gendev;
130         struct class_device     sdev_classdev;
131
132         enum scsi_device_state sdev_state;
133         unsigned long           sdev_data[0];
134 } __attribute__((aligned(sizeof(unsigned long))));
135 #define to_scsi_device(d)       \
136         container_of(d, struct scsi_device, sdev_gendev)
137 #define class_to_sdev(d)        \
138         container_of(d, struct scsi_device, sdev_classdev)
139 #define transport_class_to_sdev(class_dev) \
140         to_scsi_device(class_dev->dev)
141
142 /*
143  * scsi_target: representation of a scsi target, for now, this is only
144  * used for single_lun devices. If no one has active IO to the target,
145  * starget_sdev_user is NULL, else it points to the active sdev.
146  */
147 struct scsi_target {
148         struct scsi_device      *starget_sdev_user;
149         struct list_head        siblings;
150         struct list_head        devices;
151         struct device           dev;
152         unsigned int            reap_ref; /* protected by the host lock */
153         unsigned int            channel;
154         unsigned int            id; /* target id ... replace
155                                      * scsi_device.id eventually */
156         unsigned long           create:1; /* signal that it needs to be added */
157         unsigned long           starget_data[0];
158 } __attribute__((aligned(sizeof(unsigned long))));
159
160 #define to_scsi_target(d)       container_of(d, struct scsi_target, dev)
161 static inline struct scsi_target *scsi_target(struct scsi_device *sdev)
162 {
163         return to_scsi_target(sdev->sdev_gendev.parent);
164 }
165 #define transport_class_to_starget(class_dev) \
166         to_scsi_target(class_dev->dev)
167
168 extern struct scsi_device *__scsi_add_device(struct Scsi_Host *,
169                 uint, uint, uint, void *hostdata);
170 #define scsi_add_device(host, channel, target, lun) \
171         __scsi_add_device(host, channel, target, lun, NULL)
172 extern void scsi_remove_device(struct scsi_device *);
173 extern int scsi_device_cancel(struct scsi_device *, int);
174
175 extern int scsi_device_get(struct scsi_device *);
176 extern void scsi_device_put(struct scsi_device *);
177 extern struct scsi_device *scsi_device_lookup(struct Scsi_Host *,
178                                               uint, uint, uint);
179 extern struct scsi_device *__scsi_device_lookup(struct Scsi_Host *,
180                                                 uint, uint, uint);
181 extern struct scsi_device *scsi_device_lookup_by_target(struct scsi_target *,
182                                                         uint);
183 extern struct scsi_device *__scsi_device_lookup_by_target(struct scsi_target *,
184                                                           uint);
185 extern void starget_for_each_device(struct scsi_target *, void *,
186                      void (*fn)(struct scsi_device *, void *));
187
188 /* only exposed to implement shost_for_each_device */
189 extern struct scsi_device *__scsi_iterate_devices(struct Scsi_Host *,
190                                                   struct scsi_device *);
191
192 /**
193  * shost_for_each_device  -  iterate over all devices of a host
194  * @sdev:       iterator
195  * @host:       host whiches devices we want to iterate over
196  *
197  * This traverses over each devices of @shost.  The devices have
198  * a reference that must be released by scsi_host_put when breaking
199  * out of the loop.
200  */
201 #define shost_for_each_device(sdev, shost) \
202         for ((sdev) = __scsi_iterate_devices((shost), NULL); \
203              (sdev); \
204              (sdev) = __scsi_iterate_devices((shost), (sdev)))
205
206 /**
207  * __shost_for_each_device  -  iterate over all devices of a host (UNLOCKED)
208  * @sdev:       iterator
209  * @host:       host whiches devices we want to iterate over
210  *
211  * This traverses over each devices of @shost.  It does _not_ take a
212  * reference on the scsi_device, thus it the whole loop must be protected
213  * by shost->host_lock.
214  *
215  * Note:  The only reason why drivers would want to use this is because
216  * they're need to access the device list in irq context.  Otherwise you
217  * really want to use shost_for_each_device instead.
218  */
219 #define __shost_for_each_device(sdev, shost) \
220         list_for_each_entry((sdev), &((shost)->__devices), siblings)
221
222 extern void scsi_adjust_queue_depth(struct scsi_device *, int, int);
223 extern int scsi_track_queue_full(struct scsi_device *, int);
224
225 extern int scsi_set_medium_removal(struct scsi_device *, char);
226
227 extern int scsi_mode_sense(struct scsi_device *sdev, int dbd, int modepage,
228                            unsigned char *buffer, int len, int timeout,
229                            int retries, struct scsi_mode_data *data);
230 extern int scsi_test_unit_ready(struct scsi_device *sdev, int timeout,
231                                 int retries);
232 extern int scsi_device_set_state(struct scsi_device *sdev,
233                                  enum scsi_device_state state);
234 extern int scsi_device_quiesce(struct scsi_device *sdev);
235 extern void scsi_device_resume(struct scsi_device *sdev);
236 extern void scsi_target_quiesce(struct scsi_target *);
237 extern void scsi_target_resume(struct scsi_target *);
238 extern void scsi_scan_target(struct device *parent, unsigned int channel,
239                              unsigned int id, unsigned int lun, int rescan);
240 extern void scsi_target_reap(struct scsi_target *);
241 extern void scsi_target_block(struct device *);
242 extern void scsi_target_unblock(struct device *);
243 extern void scsi_remove_target(struct device *);
244 extern const char *scsi_device_state_name(enum scsi_device_state);
245 extern int scsi_is_sdev_device(const struct device *);
246 extern int scsi_is_target_device(const struct device *);
247 static inline int scsi_device_online(struct scsi_device *sdev)
248 {
249         return sdev->sdev_state != SDEV_OFFLINE;
250 }
251
252 /* accessor functions for the SCSI parameters */
253 static inline int scsi_device_sync(struct scsi_device *sdev)
254 {
255         return sdev->sdtr;
256 }
257 static inline int scsi_device_wide(struct scsi_device *sdev)
258 {
259         return sdev->wdtr;
260 }
261 static inline int scsi_device_dt(struct scsi_device *sdev)
262 {
263         return sdev->ppr;
264 }
265 static inline int scsi_device_dt_only(struct scsi_device *sdev)
266 {
267         if (sdev->inquiry_len < 57)
268                 return 0;
269         return (sdev->inquiry[56] & 0x0c) == 0x04;
270 }
271 static inline int scsi_device_ius(struct scsi_device *sdev)
272 {
273         if (sdev->inquiry_len < 57)
274                 return 0;
275         return sdev->inquiry[56] & 0x01;
276 }
277 static inline int scsi_device_qas(struct scsi_device *sdev)
278 {
279         if (sdev->inquiry_len < 57)
280                 return 0;
281         return sdev->inquiry[56] & 0x02;
282 }
283 #endif /* _SCSI_SCSI_DEVICE_H */