kernel/irq/autoprobe.c

   1 /*
   2  * linux/kernel/irq/autoprobe.c
   3  *
   4  * Copyright (C) 1992, 1998-2004 Linus Torvalds, Ingo Molnar
   5  *
   6  * This file contains the interrupt probing code and driver APIs.
   7  */
   8
   9 #include <linux/irq.h>
  10 #include <linux/module.h>
  11 #include <linux/interrupt.h>
  12
  13 /*
  14  * Autodetection depends on the fact that any interrupt that
  15  * comes in on to an unassigned handler will get stuck with
  16  * "IRQ_WAITING" cleared and the interrupt disabled.
  17  */
  18 static DECLARE_MUTEX(probe_sem);
  19
  20 /**
  21  *      probe_irq_on    - begin an interrupt autodetect
  22  *
  23  *      Commence probing for an interrupt. The interrupts are scanned
  24  *      and a mask of potential interrupt lines is returned.
  25  *
  26  */
  27 unsigned long probe_irq_on(void)
  28 {
  29         unsigned long val, delay;
  30         irq_desc_t *desc;
  31         unsigned int i;
  32
  33         down(&probe_sem);
  34         /*
  35          * something may have generated an irq long ago and we want to
  36          * flush such a longstanding irq before considering it as spurious.
  37          */
  38         for (i = NR_IRQS-1; i > 0; i--) {
  39                 desc = irq_desc + i;
  40
  41                 spin_lock_irq(&desc->lock);
  42                 if (!irq_desc[i].action)
  43                         irq_desc[i].handler->startup(i);
  44                 spin_unlock_irq(&desc->lock);
  45         }
  46
  47         /* Wait for longstanding interrupts to trigger. */
  48         for (delay = jiffies + HZ/50; time_after(delay, jiffies); )
  49                 /* about 20ms delay */ barrier();
  50
  51         /*
  52          * enable any unassigned irqs
  53          * (we must startup again here because if a longstanding irq
  54          * happened in the previous stage, it may have masked itself)
  55          */
  56         for (i = NR_IRQS-1; i > 0; i--) {
  57                 desc = irq_desc + i;
  58
  59                 spin_lock_irq(&desc->lock);
  60                 if (!desc->action) {
  61                         desc->status |= IRQ_AUTODETECT | IRQ_WAITING;
  62                         if (desc->handler->startup(i))
  63                                 desc->status |= IRQ_PENDING;
  64                 }
  65                 spin_unlock_irq(&desc->lock);
  66         }
  67
  68         /*
  69          * Wait for spurious interrupts to trigger
  70          */
  71         for (delay = jiffies + HZ/10; time_after(delay, jiffies); )
  72                 /* about 100ms delay */ barrier();
  73
  74         /*
  75          * Now filter out any obviously spurious interrupts
  76          */
  77         val = 0;
  78         for (i = 0; i < NR_IRQS; i++) {
  79                 irq_desc_t *desc = irq_desc + i;
  80                 unsigned int status;
  81
  82                 spin_lock_irq(&desc->lock);
  83                 status = desc->status;
  84
  85                 if (status & IRQ_AUTODETECT) {
  86                         /* It triggered already - consider it spurious. */
  87                         if (!(status & IRQ_WAITING)) {
  88                                 desc->status = status & ~IRQ_AUTODETECT;
  89                                 desc->handler->shutdown(i);
  90                         } else
  91                                 if (i < 32)
  92                                         val |= 1 << i;
  93                 }
  94                 spin_unlock_irq(&desc->lock);
  95         }
  96
  97         return val;
  98 }
  99
 100 EXPORT_SYMBOL(probe_irq_on);
 101
 102 /**
 103  *      probe_irq_mask - scan a bitmap of interrupt lines
 104  *      @val:   mask of interrupts to consider
 105  *
 106  *      Scan the interrupt lines and return a bitmap of active
 107  *      autodetect interrupts. The interrupt probe logic state
 108  *      is then returned to its previous value.
 109  *
 110  *      Note: we need to scan all the irq's even though we will
 111  *      only return autodetect irq numbers - just so that we reset
 112  *      them all to a known state.
 113  */
 114 unsigned int probe_irq_mask(unsigned long val)
 115 {
 116         unsigned int mask;
 117         int i;
 118
 119         mask = 0;
 120         for (i = 0; i < NR_IRQS; i++) {
 121                 irq_desc_t *desc = irq_desc + i;
 122                 unsigned int status;
 123
 124                 spin_lock_irq(&desc->lock);
 125                 status = desc->status;
 126
 127                 if (status & IRQ_AUTODETECT) {
 128                         if (i < 16 && !(status & IRQ_WAITING))
 129                                 mask |= 1 << i;
 130
 131                         desc->status = status & ~IRQ_AUTODETECT;
 132                         desc->handler->shutdown(i);
 133                 }
 134                 spin_unlock_irq(&desc->lock);
 135         }
 136         up(&probe_sem);
 137
 138         return mask & val;
 139 }
 140
 141 /**
 142  *      probe_irq_off   - end an interrupt autodetect
 143  *      @val: mask of potential interrupts (unused)
 144  *
 145  *      Scans the unused interrupt lines and returns the line which
 146  *      appears to have triggered the interrupt. If no interrupt was
 147  *      found then zero is returned. If more than one interrupt is
 148  *      found then minus the first candidate is returned to indicate
 149  *      their is doubt.
 150  *
 151  *      The interrupt probe logic state is returned to its previous
 152  *      value.
 153  *
 154  *      BUGS: When used in a module (which arguably shouldn't happen)
 155  *      nothing prevents two IRQ probe callers from overlapping. The
 156  *      results of this are non-optimal.
 157  */
 158 int probe_irq_off(unsigned long val)
 159 {
 160         int i, irq_found = 0, nr_irqs = 0;
 161
 162         for (i = 0; i < NR_IRQS; i++) {
 163                 irq_desc_t *desc = irq_desc + i;
 164                 unsigned int status;
 165
 166                 spin_lock_irq(&desc->lock);
 167                 status = desc->status;
 168
 169                 if (status & IRQ_AUTODETECT) {
 170                         if (!(status & IRQ_WAITING)) {
 171                                 if (!nr_irqs)
 172                                         irq_found = i;
 173                                 nr_irqs++;
 174                         }
 175                         desc->status = status & ~IRQ_AUTODETECT;
 176                         desc->handler->shutdown(i);
 177                 }
 178                 spin_unlock_irq(&desc->lock);
 179         }
 180         up(&probe_sem);
 181
 182         if (nr_irqs > 1)
 183                 irq_found = -irq_found;
 184         return irq_found;
 185 }
 186
 187 EXPORT_SYMBOL(probe_irq_off);
 188