#define HVSC .long 0x44000022
-#define H_SUCCESS 0
-#define H_BUSY 1 /* Hardware busy -- retry later */
-#define H_CLOSED 2 /* Resource closed */
-#define H_NOT_AVAILABLE 3
-#define H_CONSTRAINED 4 /* Resource request constrained to max allowed */
-#define H_PARTIAL 5
-#define H_IN_PROGRESS 14 /* Kind of like busy */
-#define H_PAGE_REGISTERED 15
-#define H_PARTIAL_STORE 16
-#define H_PENDING 17 /* returned from H_POLL_PENDING */
-#define H_CONTINUE 18 /* Returned from H_Join on success */
-#define H_LONG_BUSY_START_RANGE 9900 /* Start of long busy range */
-#define H_LONG_BUSY_ORDER_1_MSEC 9900 /* Long busy, hint that 1msec \
- is a good time to retry */
-#define H_LONG_BUSY_ORDER_10_MSEC 9901 /* Long busy, hint that 10msec \
- is a good time to retry */
-#define H_LONG_BUSY_ORDER_100_MSEC 9902 /* Long busy, hint that 100msec \
- is a good time to retry */
-#define H_LONG_BUSY_ORDER_1_SEC 9903 /* Long busy, hint that 1sec \
- is a good time to retry */
-#define H_LONG_BUSY_ORDER_10_SEC 9904 /* Long busy, hint that 10sec \
- is a good time to retry */
-#define H_LONG_BUSY_ORDER_100_SEC 9905 /* Long busy, hint that 100sec \
- is a good time to retry */
-#define H_LONG_BUSY_END_RANGE 9905 /* End of long busy range */
-#define H_HARDWARE -1 /* Hardware error */
-#define H_FUNCTION -2 /* Function not supported */
-#define H_PRIVILEGE -3 /* Caller not privileged */
-#define H_PARAMETER -4 /* Parameter invalid, out-of-range or conflicting */
-#define H_BAD_MODE -5 /* Illegal msr value */
-#define H_PTEG_FULL -6 /* PTEG is full */
-#define H_NOT_FOUND -7 /* PTE was not found" */
-#define H_RESERVED_DABR -8 /* DABR address is reserved by the hypervisor on this processor" */
-#define H_NO_MEM -9
-#define H_AUTHORITY -10
-#define H_PERMISSION -11
-#define H_DROPPED -12
-#define H_SOURCE_PARM -13
-#define H_DEST_PARM -14
-#define H_REMOTE_PARM -15
-#define H_RESOURCE -16
-#define H_ADAPTER_PARM -17
-#define H_RH_PARM -18
-#define H_RCQ_PARM -19
-#define H_SCQ_PARM -20
-#define H_EQ_PARM -21
-#define H_RT_PARM -22
-#define H_ST_PARM -23
-#define H_SIGT_PARM -24
-#define H_TOKEN_PARM -25
-#define H_MLENGTH_PARM -27
-#define H_MEM_PARM -28
-#define H_MEM_ACCESS_PARM -29
-#define H_ATTR_PARM -30
-#define H_PORT_PARM -31
-#define H_MCG_PARM -32
-#define H_VL_PARM -33
-#define H_TSIZE_PARM -34
-#define H_TRACE_PARM -35
-
-#define H_MASK_PARM -37
-#define H_MCG_FULL -38
-#define H_ALIAS_EXIST -39
-#define H_P_COUNTER -40
-#define H_TABLE_FULL -41
-#define H_ALT_TABLE -42
-#define H_MR_CONDITION -43
-#define H_NOT_ENOUGH_RESOURCES -44
-#define H_R_STATE -45
-#define H_RESCINDEND -46
-
+#define H_Success 0
+#define H_Busy 1 /* Hardware busy -- retry later */
+#define H_Closed 2 /* Resource closed */
+#define H_Constrained 4 /* Resource request constrained to max allowed */
+#define H_InProgress 14 /* Kind of like busy */
+#define H_Continue 18 /* Returned from H_Join on success */
+#define H_LongBusyStartRange 9900 /* Start of long busy range */
+#define H_LongBusyOrder1msec 9900 /* Long busy, hint that 1msec is a good time to retry */
+#define H_LongBusyOrder10msec 9901 /* Long busy, hint that 10msec is a good time to retry */
+#define H_LongBusyOrder100msec 9902 /* Long busy, hint that 100msec is a good time to retry */
+#define H_LongBusyOrder1sec 9903 /* Long busy, hint that 1sec is a good time to retry */
+#define H_LongBusyOrder10sec 9904 /* Long busy, hint that 10sec is a good time to retry */
+#define H_LongBusyOrder100sec 9905 /* Long busy, hint that 100sec is a good time to retry */
+#define H_LongBusyEndRange 9905 /* End of long busy range */
+#define H_Hardware -1 /* Hardware error */
+#define H_Function -2 /* Function not supported */
+#define H_Privilege -3 /* Caller not privileged */
+#define H_Parameter -4 /* Parameter invalid, out-of-range or conflicting */
+#define H_Bad_Mode -5 /* Illegal msr value */
+#define H_PTEG_Full -6 /* PTEG is full */
+#define H_Not_Found -7 /* PTE was not found" */
+#define H_Reserved_DABR -8 /* DABR address is reserved by the hypervisor on this processor" */
+#define H_NoMem -9
+#define H_Authority -10
+#define H_Permission -11
+#define H_Dropped -12
+#define H_SourceParm -13
+#define H_DestParm -14
+#define H_RemoteParm -15
+#define H_Resource -16
/* Long Busy is a condition that can be returned by the firmware
* when a call cannot be completed now, but the identical call
* should be retried later. This prevents calls blocking in the
- * firmware for long periods of time. Annoyingly the firmware can return
+ * firmware for long periods of time. Annoyingly the firmware can return
* a range of return codes, hinting at how long we should wait before
* retrying. If you don't care for the hint, the macro below is a good
* way to check for the long_busy return codes
*/
-#define H_IS_LONG_BUSY(x) ((x >= H_LONG_BUSY_START_RANGE) \
- && (x <= H_LONG_BUSY_END_RANGE))
+#define H_isLongBusy(x) ((x >= H_LongBusyStartRange) && (x <= H_LongBusyEndRange))
/* Flags */
#define H_LARGE_PAGE (1UL<<(63-16))
#define H_PP1 (1UL<<(63-62))
#define H_PP2 (1UL<<(63-63))
-/* VASI States */
-#define H_VASI_INVALID 0
-#define H_VASI_ENABLED 1
-#define H_VASI_ABORTED 2
-#define H_VASI_SUSPENDING 3
-#define H_VASI_SUSPENDED 4
-#define H_VASI_RESUMED 5
-#define H_VASI_COMPLETED 6
-
/* DABRX flags */
#define H_DABRX_HYPERVISOR (1UL<<(63-61))
#define H_DABRX_KERNEL (1UL<<(63-62))
#define H_DABRX_USER (1UL<<(63-63))
-/* Each control block has to be on a 4K bondary */
-#define H_CB_ALIGNMENT 4096
-
/* pSeries hypervisor opcodes */
#define H_REMOVE 0x04
#define H_ENTER 0x08
#define H_PERFMON 0x7c
#define H_MIGRATE_DMA 0x78
#define H_REGISTER_VPA 0xDC
-#define H_CEDE 0xE0
+#define H_CEDE 0xE0
#define H_CONFER 0xE4
-#define H_PROD 0xE8
+#define H_PROD 0xE8
#define H_GET_PPP 0xEC
#define H_SET_PPP 0xF0
#define H_PURR 0xF4
-#define H_PIC 0xF8
+#define H_PIC 0xF8
#define H_REG_CRQ 0xFC
#define H_FREE_CRQ 0x100
#define H_VIO_SIGNAL 0x104
#define H_SEND_CRQ 0x108
-#define H_COPY_RDMA 0x110
+#define H_COPY_RDMA 0x110
#define H_SET_XDABR 0x134
#define H_STUFF_TCE 0x138
#define H_PUT_TCE_INDIRECT 0x13C
#define H_VTERM_PARTNER_INFO 0x150
#define H_REGISTER_VTERM 0x154
#define H_FREE_VTERM 0x158
-#define H_RESET_EVENTS 0x15C
-#define H_ALLOC_RESOURCE 0x160
-#define H_FREE_RESOURCE 0x164
-#define H_MODIFY_QP 0x168
-#define H_QUERY_QP 0x16C
-#define H_REREGISTER_PMR 0x170
-#define H_REGISTER_SMR 0x174
-#define H_QUERY_MR 0x178
-#define H_QUERY_MW 0x17C
-#define H_QUERY_HCA 0x180
-#define H_QUERY_PORT 0x184
-#define H_MODIFY_PORT 0x188
-#define H_DEFINE_AQP1 0x18C
-#define H_GET_TRACE_BUFFER 0x190
-#define H_DEFINE_AQP0 0x194
-#define H_RESIZE_MR 0x198
-#define H_ATTACH_MCQP 0x19C
-#define H_DETACH_MCQP 0x1A0
-#define H_CREATE_RPT 0x1A4
-#define H_REMOVE_RPT 0x1A8
-#define H_REGISTER_RPAGES 0x1AC
-#define H_DISABLE_AND_GETC 0x1B0
-#define H_ERROR_DATA 0x1B4
-#define H_GET_HCA_INFO 0x1B8
-#define H_GET_PERF_COUNT 0x1BC
-#define H_MANAGE_TRACE 0x1C0
-#define H_QUERY_INT_STATE 0x1E4
-#define H_POLL_PENDING 0x1D8
+#define H_POLL_PENDING 0x1D8
#define H_JOIN 0x298
-#define H_VASI_STATE 0x2A4
#define H_ENABLE_CRQ 0x2B0
#ifndef __ASSEMBLY__
*/
long plpar_hcall_8arg_2ret(unsigned long opcode,
unsigned long arg1,
- unsigned long arg2,
+ unsigned long arg2,
unsigned long arg3,
unsigned long arg4,
unsigned long arg5,
unsigned long *out3,
unsigned long *out4);
-long plpar_hcall_7arg_7ret(unsigned long opcode,
- unsigned long arg1,
- unsigned long arg2,
- unsigned long arg3,
- unsigned long arg4,
- unsigned long arg5,
- unsigned long arg6,
- unsigned long arg7,
- unsigned long *out1,
- unsigned long *out2,
- unsigned long *out3,
- unsigned long *out4,
- unsigned long *out5,
- unsigned long *out6,
- unsigned long *out7);
-
-long plpar_hcall_9arg_9ret(unsigned long opcode,
- unsigned long arg1,
- unsigned long arg2,
- unsigned long arg3,
- unsigned long arg4,
- unsigned long arg5,
- unsigned long arg6,
- unsigned long arg7,
- unsigned long arg8,
- unsigned long arg9,
- unsigned long *out1,
- unsigned long *out2,
- unsigned long *out3,
- unsigned long *out4,
- unsigned long *out5,
- unsigned long *out6,
- unsigned long *out7,
- unsigned long *out8,
- unsigned long *out9);
-
#endif /* __ASSEMBLY__ */
#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_HVCALL_H */
git://git.onelab.eu / linux-2.6.git / blobdiff