1 Open vSwitch <http://openvswitch.org>
3 Frequently Asked Questions
4 ==========================
9 Q: What is Open vSwitch?
11 A: Open vSwitch is a production quality open source software switch
12 designed to be used as a vswitch in virtualized server
13 environments. A vswitch forwards traffic between different VMs on
14 the same physical host and also forwards traffic between VMs and
15 the physical network. Open vSwitch supports standard management
16 interfaces (e.g. sFlow, NetFlow, IPFIX, RSPAN, CLI), and is open to
17 programmatic extension and control using OpenFlow and the OVSDB
20 Open vSwitch as designed to be compatible with modern switching
21 chipsets. This means that it can be ported to existing high-fanout
22 switches allowing the same flexible control of the physical
23 infrastructure as the virtual infrastructure. It also means that
24 Open vSwitch will be able to take advantage of on-NIC switching
25 chipsets as their functionality matures.
27 Q: What virtualization platforms can use Open vSwitch?
29 A: Open vSwitch can currently run on any Linux-based virtualization
30 platform (kernel 2.6.32 and newer), including: KVM, VirtualBox, Xen,
31 Xen Cloud Platform, XenServer. As of Linux 3.3 it is part of the
32 mainline kernel. The bulk of the code is written in platform-
33 independent C and is easily ported to other environments. We welcome
34 inquires about integrating Open vSwitch with other virtualization
37 Q: How can I try Open vSwitch?
39 A: The Open vSwitch source code can be built on a Linux system. You can
40 build and experiment with Open vSwitch on any Linux machine.
41 Packages for various Linux distributions are available on many
42 platforms, including: Debian, Ubuntu, Fedora.
44 You may also download and run a virtualization platform that already
45 has Open vSwitch integrated. For example, download a recent ISO for
46 XenServer or Xen Cloud Platform. Be aware that the version
47 integrated with a particular platform may not be the most recent Open
50 Q: Does Open vSwitch only work on Linux?
52 A: No, Open vSwitch has been ported to a number of different operating
53 systems and hardware platforms. Most of the development work occurs
54 on Linux, but the code should be portable to any POSIX system. We've
55 seen Open vSwitch ported to a number of different platforms,
56 including FreeBSD, Windows, and even non-POSIX embedded systems.
58 By definition, the Open vSwitch Linux kernel module only works on
59 Linux and will provide the highest performance. However, a userspace
60 datapath is available that should be very portable.
62 Q: What's involved with porting Open vSwitch to a new platform or
65 A: The PORTING document describes how one would go about porting Open
66 vSwitch to a new operating system or hardware platform.
68 Q: Why would I use Open vSwitch instead of the Linux bridge?
70 A: Open vSwitch is specially designed to make it easier to manage VM
71 network configuration and monitor state spread across many physical
72 hosts in dynamic virtualized environments. Please see WHY-OVS for a
73 more detailed description of how Open vSwitch relates to the Linux
76 Q: How is Open vSwitch related to distributed virtual switches like the
77 VMware vNetwork distributed switch or the Cisco Nexus 1000V?
79 A: Distributed vswitch applications (e.g., VMware vNetwork distributed
80 switch, Cisco Nexus 1000V) provide a centralized way to configure and
81 monitor the network state of VMs that are spread across many physical
82 hosts. Open vSwitch is not a distributed vswitch itself, rather it
83 runs on each physical host and supports remote management in a way
84 that makes it easier for developers of virtualization/cloud
85 management platforms to offer distributed vswitch capabilities.
87 To aid in distribution, Open vSwitch provides two open protocols that
88 are specially designed for remote management in virtualized network
89 environments: OpenFlow, which exposes flow-based forwarding state,
90 and the OVSDB management protocol, which exposes switch port state.
91 In addition to the switch implementation itself, Open vSwitch
92 includes tools (ovs-controller, ovs-ofctl, ovs-vsctl) that developers
93 can script and extend to provide distributed vswitch capabilities
94 that are closely integrated with their virtualization management
97 Q: Why doesn't Open vSwitch support distribution?
99 A: Open vSwitch is intended to be a useful component for building
100 flexible network infrastructure. There are many different approaches
101 to distribution which balance trade-offs between simplicity,
102 scalability, hardware compatibility, convergence times, logical
103 forwarding model, etc. The goal of Open vSwitch is to be able to
104 support all as a primitive building block rather than choose a
105 particular point in the distributed design space.
107 Q: How can I contribute to the Open vSwitch Community?
109 A: You can start by joining the mailing lists and helping to answer
110 questions. You can also suggest improvements to documentation. If
111 you have a feature or bug you would like to work on, send a mail to
112 one of the mailing lists:
114 http://openvswitch.org/mlists/
120 Q: What does it mean for an Open vSwitch release to be LTS (long-term
123 A: All official releases have been through a comprehensive testing
124 process and are suitable for production use. Planned releases will
125 occur several times a year. If a significant bug is identified in an
126 LTS release, we will provide an updated release that includes the
127 fix. Releases that are not LTS may not be fixed and may just be
128 supplanted by the next major release. The current LTS release is
131 Q: What Linux kernel versions does each Open vSwitch release work with?
133 A: The following table lists the Linux kernel versions against which the
134 given versions of the Open vSwitch kernel module will successfully
135 build. The Linux kernel versions are upstream kernel versions, so
136 Linux kernels modified from the upstream sources may not build in
137 some cases even if they are based on a supported version. This is
138 most notably true of Red Hat Enterprise Linux (RHEL) kernels, which
139 are extensively modified from upstream.
141 Open vSwitch Linux kernel
142 ------------ -------------
154 Open vSwitch userspace should also work with the Linux kernel module
155 built into Linux 3.3 and later.
157 Open vSwitch userspace is not sensitive to the Linux kernel version.
158 It should build against almost any kernel, certainly against 2.6.32
161 Q: What Linux kernel versions does IPFIX flow monitoring work with?
163 A: IPFIX flow monitoring requires the Linux kernel module from Open
164 vSwitch version 1.10.90 or later.
166 Q: Should userspace or kernel be upgraded first to minimize downtime?
168 In general, the Open vSwitch userspace should be used with the
169 kernel version included in the same release or with the version
170 from upstream Linux. However, when upgrading between two releases
171 of Open vSwitch it is best to migrate userspace first to reduce
172 the possbility of incompatibilities.
174 Q: What features are not available in the Open vSwitch kernel datapath
175 that ships as part of the upstream Linux kernel?
177 A: The kernel module in upstream Linux 3.3 and later does not include
178 tunnel virtual ports, that is, interfaces with type "gre",
179 "ipsec_gre", "gre64", "ipsec_gre64", "vxlan", or "lisp". It is
180 possible to create tunnels in Linux and attach them to Open vSwitch
181 as system devices. However, they cannot be dynamically created
182 through the OVSDB protocol or set the tunnel ids as a flow action.
184 Work is in progress in adding tunnel virtual ports to the upstream
185 Linux version of the Open vSwitch kernel module. For now, if you
186 need these features, use the kernel module from the Open vSwitch
187 distribution instead of the upstream Linux kernel module.
189 The upstream kernel module does not include patch ports, but this
190 only matters for Open vSwitch 1.9 and earlier, because Open vSwitch
191 1.10 and later implement patch ports without using this kernel
194 Q: What features are not available when using the userspace datapath?
196 A: Tunnel virtual ports are not supported, as described in the
197 previous answer. It is also not possible to use queue-related
198 actions. On Linux kernels before 2.6.39, maximum-sized VLAN packets
199 may not be transmitted.
205 Q: I thought Open vSwitch was a virtual Ethernet switch, but the
206 documentation keeps talking about bridges. What's a bridge?
208 A: In networking, the terms "bridge" and "switch" are synonyms. Open
209 vSwitch implements an Ethernet switch, which means that it is also
214 A: See the "VLAN" section below.
220 Q: How do I configure a port as an access port?
222 A: Add "tag=VLAN" to your "ovs-vsctl add-port" command. For example,
223 the following commands configure br0 with eth0 as a trunk port (the
224 default) and tap0 as an access port for VLAN 9:
227 ovs-vsctl add-port br0 eth0
228 ovs-vsctl add-port br0 tap0 tag=9
230 If you want to configure an already added port as an access port,
231 use "ovs-vsctl set", e.g.:
233 ovs-vsctl set port tap0 tag=9
235 Q: How do I configure a port as a SPAN port, that is, enable mirroring
236 of all traffic to that port?
238 A: The following commands configure br0 with eth0 and tap0 as trunk
239 ports. All traffic coming in or going out on eth0 or tap0 is also
240 mirrored to tap1; any traffic arriving on tap1 is dropped:
243 ovs-vsctl add-port br0 eth0
244 ovs-vsctl add-port br0 tap0
245 ovs-vsctl add-port br0 tap1 \
246 -- --id=@p get port tap1 \
247 -- --id=@m create mirror name=m0 select-all=true output-port=@p \
248 -- set bridge br0 mirrors=@m
250 To later disable mirroring, run:
252 ovs-vsctl clear bridge br0 mirrors
254 Q: Does Open vSwitch support configuring a port in promiscuous mode?
256 A: Yes. How you configure it depends on what you mean by "promiscuous
259 - Conventionally, "promiscuous mode" is a feature of a network
260 interface card. Ordinarily, a NIC passes to the CPU only the
261 packets actually destined to its host machine. It discards
262 the rest to avoid wasting memory and CPU cycles. When
263 promiscuous mode is enabled, however, it passes every packet
264 to the CPU. On an old-style shared-media or hub-based
265 network, this allows the host to spy on all packets on the
266 network. But in the switched networks that are almost
267 everywhere these days, promiscuous mode doesn't have much
268 effect, because few packets not destined to a host are
269 delivered to the host's NIC.
271 This form of promiscuous mode is configured in the guest OS of
272 the VMs on your bridge, e.g. with "ifconfig".
274 - The VMware vSwitch uses a different definition of "promiscuous
275 mode". When you configure promiscuous mode on a VMware vNIC,
276 the vSwitch sends a copy of every packet received by the
277 vSwitch to that vNIC. That has a much bigger effect than just
278 enabling promiscuous mode in a guest OS. Rather than getting
279 a few stray packets for which the switch does not yet know the
280 correct destination, the vNIC gets every packet. The effect
281 is similar to replacing the vSwitch by a virtual hub.
283 This "promiscuous mode" is what switches normally call "port
284 mirroring" or "SPAN". For information on how to configure
285 SPAN, see "How do I configure a port as a SPAN port, that is,
286 enable mirroring of all traffic to that port?"
288 Q: How do I configure a VLAN as an RSPAN VLAN, that is, enable
289 mirroring of all traffic to that VLAN?
291 A: The following commands configure br0 with eth0 as a trunk port and
292 tap0 as an access port for VLAN 10. All traffic coming in or going
293 out on tap0, as well as traffic coming in or going out on eth0 in
294 VLAN 10, is also mirrored to VLAN 15 on eth0. The original tag for
295 VLAN 10, in cases where one is present, is dropped as part of
299 ovs-vsctl add-port br0 eth0
300 ovs-vsctl add-port br0 tap0 tag=10
302 -- --id=@m create mirror name=m0 select-all=true select-vlan=10 \
304 -- set bridge br0 mirrors=@m
306 To later disable mirroring, run:
308 ovs-vsctl clear bridge br0 mirrors
310 Mirroring to a VLAN can disrupt a network that contains unmanaged
311 switches. See ovs-vswitchd.conf.db(5) for details. Mirroring to a
312 GRE tunnel has fewer caveats than mirroring to a VLAN and should
313 generally be preferred.
315 Q: Can I mirror more than one input VLAN to an RSPAN VLAN?
317 A: Yes, but mirroring to a VLAN strips the original VLAN tag in favor
318 of the specified output-vlan. This loss of information may make
319 the mirrored traffic too hard to interpret.
321 To mirror multiple VLANs, use the commands above, but specify a
322 comma-separated list of VLANs as the value for select-vlan. To
323 mirror every VLAN, use the commands above, but omit select-vlan and
326 When a packet arrives on a VLAN that is used as a mirror output
327 VLAN, the mirror is disregarded. Instead, in standalone mode, OVS
328 floods the packet across all the ports for which the mirror output
329 VLAN is configured. (If an OpenFlow controller is in use, then it
330 can override this behavior through the flow table.) If OVS is used
331 as an intermediate switch, rather than an edge switch, this ensures
332 that the RSPAN traffic is distributed through the network.
334 Mirroring to a VLAN can disrupt a network that contains unmanaged
335 switches. See ovs-vswitchd.conf.db(5) for details. Mirroring to a
336 GRE tunnel has fewer caveats than mirroring to a VLAN and should
337 generally be preferred.
339 Q: How do I configure mirroring of all traffic to a GRE tunnel?
341 A: The following commands configure br0 with eth0 and tap0 as trunk
342 ports. All traffic coming in or going out on eth0 or tap0 is also
343 mirrored to gre0, a GRE tunnel to the remote host 192.168.1.10; any
344 traffic arriving on gre0 is dropped:
347 ovs-vsctl add-port br0 eth0
348 ovs-vsctl add-port br0 tap0
349 ovs-vsctl add-port br0 gre0 \
350 -- set interface gre0 type=gre options:remote_ip=192.168.1.10 \
351 -- --id=@p get port gre0 \
352 -- --id=@m create mirror name=m0 select-all=true output-port=@p \
353 -- set bridge br0 mirrors=@m
355 To later disable mirroring and destroy the GRE tunnel:
357 ovs-vsctl clear bridge br0 mirrors
358 ovs-vcstl del-port br0 gre0
360 Q: Does Open vSwitch support ERSPAN?
362 A: No. ERSPAN is an undocumented proprietary protocol. As an
363 alternative, Open vSwitch supports mirroring to a GRE tunnel (see
366 Q: How do I connect two bridges?
368 A: First, why do you want to do this? Two connected bridges are not
369 much different from a single bridge, so you might as well just have
370 a single bridge with all your ports on it.
372 If you still want to connect two bridges, you can use a pair of
373 patch ports. The following example creates bridges br0 and br1,
374 adds eth0 and tap0 to br0, adds tap1 to br1, and then connects br0
375 and br1 with a pair of patch ports.
378 ovs-vsctl add-port br0 eth0
379 ovs-vsctl add-port br0 tap0
381 ovs-vsctl add-port br1 tap1
383 -- add-port br0 patch0 \
384 -- set interface patch0 type=patch options:peer=patch1 \
385 -- add-port br1 patch1 \
386 -- set interface patch1 type=patch options:peer=patch0
388 Bridges connected with patch ports are much like a single bridge.
389 For instance, if the example above also added eth1 to br1, and both
390 eth0 and eth1 happened to be connected to the same next-hop switch,
391 then you could loop your network just as you would if you added
392 eth0 and eth1 to the same bridge (see the "Configuration Problems"
393 section below for more information).
395 If you are using Open vSwitch 1.9 or an earlier version, then you
396 need to be using the kernel module bundled with Open vSwitch rather
397 than the one that is integrated into Linux 3.3 and later, because
398 Open vSwitch 1.9 and earlier versions need kernel support for patch
399 ports. This also means that in Open vSwitch 1.9 and earlier, patch
400 ports will not work with the userspace datapath, only with the
403 Q: Why are there so many different ways to dump flows?
405 A: Open vSwitch uses different kinds of flows for different purposes:
407 - OpenFlow flows are the most important kind of flow. OpenFlow
408 controllers use these flows to define a switch's policy.
409 OpenFlow flows support wildcards, priorities, and multiple
412 When in-band control is in use, Open vSwitch sets up a few
413 "hidden" flows, with priority higher than a controller or the
414 user can configure, that are not visible via OpenFlow. (See
415 the "Controller" section of the FAQ for more information
418 - The Open vSwitch software switch implementation uses a second
419 kind of flow internally. These flows, called "exact-match"
420 or "datapath" or "kernel" flows, do not support wildcards or
421 priorities and comprise only a single table, which makes them
422 suitable for caching. OpenFlow flows and exact-match flows
423 also support different actions and number ports differently.
425 Exact-match flows are an implementation detail that is
426 subject to change in future versions of Open vSwitch. Even
427 with the current version of Open vSwitch, hardware switch
428 implementations do not necessarily use exact-match flows.
430 Each of the commands for dumping flows has a different purpose:
432 - "ovs-ofctl dump-flows <br>" dumps OpenFlow flows, excluding
433 hidden flows. This is the most commonly useful form of flow
434 dump. (Unlike the other commands, this should work with any
435 OpenFlow switch, not just Open vSwitch.)
437 - "ovs-appctl bridge/dump-flows <br>" dumps OpenFlow flows,
438 including hidden flows. This is occasionally useful for
439 troubleshooting suspected issues with in-band control.
441 - "ovs-dpctl dump-flows [dp]" dumps the exact-match flow table
442 entries for a Linux kernel-based datapath. In Open vSwitch
443 1.10 and later, ovs-vswitchd merges multiple switches into a
444 single datapath, so it will show all the flows on all your
445 kernel-based switches. This command can occasionally be
446 useful for debugging.
448 - "ovs-appctl dpif/dump-flows <br>", new in Open vSwitch 1.10,
449 dumps exact-match flows for only the specified bridge,
450 regardless of the type.
453 Configuration Problems
454 ----------------------
456 Q: I created a bridge and added my Ethernet port to it, using commands
460 ovs-vsctl add-port br0 eth0
462 and as soon as I ran the "add-port" command I lost all connectivity
465 A: A physical Ethernet device that is part of an Open vSwitch bridge
466 should not have an IP address. If one does, then that IP address
467 will not be fully functional.
469 You can restore functionality by moving the IP address to an Open
470 vSwitch "internal" device, such as the network device named after
471 the bridge itself. For example, assuming that eth0's IP address is
472 192.168.128.5, you could run the commands below to fix up the
475 ifconfig eth0 0.0.0.0
476 ifconfig br0 192.168.128.5
478 (If your only connection to the machine running OVS is through the
479 IP address in question, then you would want to run all of these
480 commands on a single command line, or put them into a script.) If
481 there were any additional routes assigned to eth0, then you would
482 also want to use commands to adjust these routes to go through br0.
484 If you use DHCP to obtain an IP address, then you should kill the
485 DHCP client that was listening on the physical Ethernet interface
486 (e.g. eth0) and start one listening on the internal interface
487 (e.g. br0). You might still need to manually clear the IP address
488 from the physical interface (e.g. with "ifconfig eth0 0.0.0.0").
490 There is no compelling reason why Open vSwitch must work this way.
491 However, this is the way that the Linux kernel bridge module has
492 always worked, so it's a model that those accustomed to Linux
493 bridging are already used to. Also, the model that most people
494 expect is not implementable without kernel changes on all the
495 versions of Linux that Open vSwitch supports.
497 By the way, this issue is not specific to physical Ethernet
498 devices. It applies to all network devices except Open vswitch
501 Q: I created a bridge and added a couple of Ethernet ports to it,
502 using commands like these:
505 ovs-vsctl add-port br0 eth0
506 ovs-vsctl add-port br0 eth1
508 and now my network seems to have melted: connectivity is unreliable
509 (even connectivity that doesn't go through Open vSwitch), all the
510 LEDs on my physical switches are blinking, wireshark shows
511 duplicated packets, and CPU usage is very high.
513 A: More than likely, you've looped your network. Probably, eth0 and
514 eth1 are connected to the same physical Ethernet switch. This
515 yields a scenario where OVS receives a broadcast packet on eth0 and
516 sends it out on eth1, then the physical switch connected to eth1
517 sends the packet back on eth0, and so on forever. More complicated
518 scenarios, involving a loop through multiple switches, are possible
521 The solution depends on what you are trying to do:
523 - If you added eth0 and eth1 to get higher bandwidth or higher
524 reliability between OVS and your physical Ethernet switch,
525 use a bond. The following commands create br0 and then add
526 eth0 and eth1 as a bond:
529 ovs-vsctl add-bond br0 bond0 eth0 eth1
531 Bonds have tons of configuration options. Please read the
532 documentation on the Port table in ovs-vswitchd.conf.db(5)
535 - Perhaps you don't actually need eth0 and eth1 to be on the
536 same bridge. For example, if you simply want to be able to
537 connect each of them to virtual machines, then you can put
538 each of them on a bridge of its own:
541 ovs-vsctl add-port br0 eth0
544 ovs-vsctl add-port br1 eth1
546 and then connect VMs to br0 and br1. (A potential
547 disadvantage is that traffic cannot directly pass between br0
548 and br1. Instead, it will go out eth0 and come back in eth1,
551 - If you have a redundant or complex network topology and you
552 want to prevent loops, turn on spanning tree protocol (STP).
553 The following commands create br0, enable STP, and add eth0
554 and eth1 to the bridge. The order is important because you
555 don't want have to have a loop in your network even
559 ovs-vsctl set bridge br0 stp_enable=true
560 ovs-vsctl add-port br0 eth0
561 ovs-vsctl add-port br0 eth1
563 The Open vSwitch implementation of STP is not well tested.
564 Please report any bugs you observe, but if you'd rather avoid
565 acting as a beta tester then another option might be your
568 Q: I can't seem to use Open vSwitch in a wireless network.
570 A: Wireless base stations generally only allow packets with the source
571 MAC address of NIC that completed the initial handshake.
572 Therefore, without MAC rewriting, only a single device can
573 communicate over a single wireless link.
575 This isn't specific to Open vSwitch, it's enforced by the access
576 point, so the same problems will show up with the Linux bridge or
577 any other way to do bridging.
579 Q: I can't seem to add my PPP interface to an Open vSwitch bridge.
581 A: PPP most commonly carries IP packets, but Open vSwitch works only
582 with Ethernet frames. The correct way to interface PPP to an
583 Ethernet network is usually to use routing instead of switching.
585 Q: Is there any documentation on the database tables and fields?
587 A: Yes. ovs-vswitchd.conf.db(5) is a comprehensive reference.
589 Q: When I run ovs-dpctl I no longer see the bridges I created. Instead,
590 I only see a datapath called "ovs-system". How can I see datapath
591 information about a particular bridge?
593 A: In version 1.9.0, OVS switched to using a single datapath that is
594 shared by all bridges of that type. The "ovs-appctl dpif/*"
595 commands provide similar functionality that is scoped by the bridge.
598 Quality of Service (QoS)
599 ------------------------
601 Q: How do I configure Quality of Service (QoS)?
603 A: Suppose that you want to set up bridge br0 connected to physical
604 Ethernet port eth0 (a 1 Gbps device) and virtual machine interfaces
605 vif1.0 and vif2.0, and that you want to limit traffic from vif1.0
606 to eth0 to 10 Mbps and from vif2.0 to eth0 to 20 Mbps. Then, you
607 could configure the bridge this way:
611 add-port br0 eth0 -- \
612 add-port br0 vif1.0 -- set interface vif1.0 ofport_request=5 -- \
613 add-port br0 vif2.0 -- set interface vif2.0 ofport_request=6 -- \
614 set port eth0 qos=@newqos -- \
615 --id=@newqos create qos type=linux-htb \
616 other-config:max-rate=1000000000 \
617 queues:123=@vif10queue \
618 queues:234=@vif20queue -- \
619 --id=@vif10queue create queue other-config:max-rate=10000000 -- \
620 --id=@vif20queue create queue other-config:max-rate=20000000
622 At this point, bridge br0 is configured with the ports and eth0 is
623 configured with the queues that you need for QoS, but nothing is
624 actually directing packets from vif1.0 or vif2.0 to the queues that
625 we have set up for them. That means that all of the packets to
626 eth0 are going to the "default queue", which is not what we want.
628 We use OpenFlow to direct packets from vif1.0 and vif2.0 to the
629 queues reserved for them:
631 ovs-ofctl add-flow br0 in_port=5,actions=set_queue:123,normal
632 ovs-ofctl add-flow br0 in_port=6,actions=set_queue:234,normal
634 Each of the above flows matches on the input port, sets up the
635 appropriate queue (123 for vif1.0, 234 for vif2.0), and then
636 executes the "normal" action, which performs the same switching
637 that Open vSwitch would have done without any OpenFlow flows being
638 present. (We know that vif1.0 and vif2.0 have OpenFlow port
639 numbers 5 and 6, respectively, because we set their ofport_request
640 columns above. If we had not done that, then we would have needed
641 to find out their port numbers before setting up these flows.)
643 Now traffic going from vif1.0 or vif2.0 to eth0 should be
646 By the way, if you delete the bridge created by the above commands,
651 then that will leave one unreferenced QoS record and two
652 unreferenced Queue records in the Open vSwich database. One way to
653 clear them out, assuming you don't have other QoS or Queue records
654 that you want to keep, is:
656 ovs-vsctl -- --all destroy QoS -- --all destroy Queue
658 If you do want to keep some QoS or Queue records, or the Open
659 vSwitch you are using is older than version 1.8 (which added the
660 --all option), then you will have to destroy QoS and Queue records
663 Q: I configured Quality of Service (QoS) in my OpenFlow network by
664 adding records to the QoS and Queue table, but the results aren't
667 A: Did you install OpenFlow flows that use your queues? This is the
668 primary way to tell Open vSwitch which queues you want to use. If
669 you don't do this, then the default queue will be used, which will
670 probably not have the effect you want.
672 Refer to the previous question for an example.
674 Q: I configured QoS, correctly, but my measurements show that it isn't
675 working as well as I expect.
677 A: With the Linux kernel, the Open vSwitch implementation of QoS has
680 - Open vSwitch configures a subset of Linux kernel QoS
681 features, according to what is in OVSDB. It is possible that
682 this code has bugs. If you believe that this is so, then you
683 can configure the Linux traffic control (QoS) stack directly
684 with the "tc" program. If you get better results that way,
685 you can send a detailed bug report to bugs@openvswitch.org.
687 It is certain that Open vSwitch cannot configure every Linux
688 kernel QoS feature. If you need some feature that OVS cannot
689 configure, then you can also use "tc" directly (or add that
692 - The Open vSwitch implementation of OpenFlow allows flows to
693 be directed to particular queues. This is pretty simple and
694 unlikely to have serious bugs at this point.
696 However, most problems with QoS on Linux are not bugs in Open
697 vSwitch at all. They tend to be either configuration errors
698 (please see the earlier questions in this section) or issues with
699 the traffic control (QoS) stack in Linux. The Open vSwitch
700 developers are not experts on Linux traffic control. We suggest
701 that, if you believe you are encountering a problem with Linux
702 traffic control, that you consult the tc manpages (e.g. tc(8),
703 tc-htb(8), tc-hfsc(8)), web resources (e.g. http://lartc.org/), or
704 mailing lists (e.g. http://vger.kernel.org/vger-lists.html#netdev).
712 A: At the simplest level, a VLAN (short for "virtual LAN") is a way to
713 partition a single switch into multiple switches. Suppose, for
714 example, that you have two groups of machines, group A and group B.
715 You want the machines in group A to be able to talk to each other,
716 and you want the machine in group B to be able to talk to each
717 other, but you don't want the machines in group A to be able to
718 talk to the machines in group B. You can do this with two
719 switches, by plugging the machines in group A into one switch and
720 the machines in group B into the other switch.
722 If you only have one switch, then you can use VLANs to do the same
723 thing, by configuring the ports for machines in group A as VLAN
724 "access ports" for one VLAN and the ports for group B as "access
725 ports" for a different VLAN. The switch will only forward packets
726 between ports that are assigned to the same VLAN, so this
727 effectively subdivides your single switch into two independent
728 switches, one for each group of machines.
730 So far we haven't said anything about VLAN headers. With access
731 ports, like we've described so far, no VLAN header is present in
732 the Ethernet frame. This means that the machines (or switches)
733 connected to access ports need not be aware that VLANs are
734 involved, just like in the case where we use two different physical
737 Now suppose that you have a whole bunch of switches in your
738 network, instead of just one, and that some machines in group A are
739 connected directly to both switches 1 and 2. To allow these
740 machines to talk to each other, you could add an access port for
741 group A's VLAN to switch 1 and another to switch 2, and then
742 connect an Ethernet cable between those ports. That works fine,
743 but it doesn't scale well as the number of switches and the number
744 of VLANs increases, because you use up a lot of valuable switch
745 ports just connecting together your VLANs.
747 This is where VLAN headers come in. Instead of using one cable and
748 two ports per VLAN to connect a pair of switches, we configure a
749 port on each switch as a VLAN "trunk port". Packets sent and
750 received on a trunk port carry a VLAN header that says what VLAN
751 the packet belongs to, so that only two ports total are required to
752 connect the switches, regardless of the number of VLANs in use.
753 Normally, only switches (either physical or virtual) are connected
754 to a trunk port, not individual hosts, because individual hosts
755 don't expect to see a VLAN header in the traffic that they receive.
757 None of the above discussion says anything about particular VLAN
758 numbers. This is because VLAN numbers are completely arbitrary.
759 One must only ensure that a given VLAN is numbered consistently
760 throughout a network and that different VLANs are given different
761 numbers. (That said, VLAN 0 is usually synonymous with a packet
762 that has no VLAN header, and VLAN 4095 is reserved.)
766 A: Many drivers in Linux kernels before version 3.3 had VLAN-related
767 bugs. If you are having problems with VLANs that you suspect to be
768 driver related, then you have several options:
770 - Upgrade to Linux 3.3 or later.
772 - Build and install a fixed version of the particular driver
773 that is causing trouble, if one is available.
775 - Use a NIC whose driver does not have VLAN problems.
777 - Use "VLAN splinters", a feature in Open vSwitch 1.4 and later
778 that works around bugs in kernel drivers. To enable VLAN
779 splinters on interface eth0, use the command:
781 ovs-vsctl set interface eth0 other-config:enable-vlan-splinters=true
783 For VLAN splinters to be effective, Open vSwitch must know
784 which VLANs are in use. See the "VLAN splinters" section in
785 the Interface table in ovs-vswitchd.conf.db(5) for details on
786 how Open vSwitch infers in-use VLANs.
788 VLAN splinters increase memory use and reduce performance, so
789 use them only if needed.
791 - Apply the "vlan workaround" patch from the XenServer kernel
792 patch queue, build Open vSwitch against this patched kernel,
793 and then use ovs-vlan-bug-workaround(8) to enable the VLAN
794 workaround for each interface whose driver is buggy.
796 (This is a nontrivial exercise, so this option is included
797 only for completeness.)
799 It is not always easy to tell whether a Linux kernel driver has
800 buggy VLAN support. The ovs-vlan-test(8) and ovs-test(8) utilities
801 can help you test. See their manpages for details. Of the two
802 utilities, ovs-test(8) is newer and more thorough, but
803 ovs-vlan-test(8) may be easier to use.
805 Q: VLANs still don't work. I've tested the driver so I know that it's OK.
807 A: Do you have VLANs enabled on the physical switch that OVS is
808 attached to? Make sure that the port is configured to trunk the
809 VLAN or VLANs that you are using with OVS.
811 Q: Outgoing VLAN-tagged traffic goes through OVS to my physical switch
812 and to its destination host, but OVS seems to drop incoming return
815 A: It's possible that you have the VLAN configured on your physical
816 switch as the "native" VLAN. In this mode, the switch treats
817 incoming packets either tagged with the native VLAN or untagged as
818 part of the native VLAN. It may also send outgoing packets in the
819 native VLAN without a VLAN tag.
821 If this is the case, you have two choices:
823 - Change the physical switch port configuration to tag packets
824 it forwards to OVS with the native VLAN instead of forwarding
827 - Change the OVS configuration for the physical port to a
828 native VLAN mode. For example, the following sets up a
829 bridge with port eth0 in "native-tagged" mode in VLAN 9:
832 ovs-vsctl add-port br0 eth0 tag=9 vlan_mode=native-tagged
834 In this situation, "native-untagged" mode will probably work
835 equally well. Refer to the documentation for the Port table
836 in ovs-vswitchd.conf.db(5) for more information.
838 Q: I added a pair of VMs on different VLANs, like this:
841 ovs-vsctl add-port br0 eth0
842 ovs-vsctl add-port br0 tap0 tag=9
843 ovs-vsctl add-port br0 tap1 tag=10
845 but the VMs can't access each other, the external network, or the
848 A: It is to be expected that the VMs can't access each other. VLANs
849 are a means to partition a network. When you configured tap0 and
850 tap1 as access ports for different VLANs, you indicated that they
851 should be isolated from each other.
853 As for the external network and the Internet, it seems likely that
854 the machines you are trying to access are not on VLAN 9 (or 10) and
855 that the Internet is not available on VLAN 9 (or 10).
857 Q: I added a pair of VMs on the same VLAN, like this:
860 ovs-vsctl add-port br0 eth0
861 ovs-vsctl add-port br0 tap0 tag=9
862 ovs-vsctl add-port br0 tap1 tag=9
864 The VMs can access each other, but not the external network or the
867 A: It seems likely that the machines you are trying to access in the
868 external network are not on VLAN 9 and that the Internet is not
869 available on VLAN 9. Also, ensure VLAN 9 is set up as an allowed
870 trunk VLAN on the upstream switch port to which eth0 is connected.
872 Q: Can I configure an IP address on a VLAN?
874 A: Yes. Use an "internal port" configured as an access port. For
875 example, the following configures IP address 192.168.0.7 on VLAN 9.
876 That is, OVS will forward packets from eth0 to 192.168.0.7 only if
877 they have an 802.1Q header with VLAN 9. Conversely, traffic
878 forwarded from 192.168.0.7 to eth0 will be tagged with an 802.1Q
882 ovs-vsctl add-port br0 eth0
883 ovs-vsctl add-port br0 vlan9 tag=9 -- set interface vlan9 type=internal
884 ifconfig vlan9 192.168.0.7
886 Q: My OpenFlow controller doesn't see the VLANs that I expect.
888 A: The configuration for VLANs in the Open vSwitch database (e.g. via
889 ovs-vsctl) only affects traffic that goes through Open vSwitch's
890 implementation of the OpenFlow "normal switching" action. By
891 default, when Open vSwitch isn't connected to a controller and
892 nothing has been manually configured in the flow table, all traffic
893 goes through the "normal switching" action. But, if you set up
894 OpenFlow flows on your own, through a controller or using ovs-ofctl
895 or through other means, then you have to implement VLAN handling
898 You can use "normal switching" as a component of your OpenFlow
899 actions, e.g. by putting "normal" into the lists of actions on
900 ovs-ofctl or by outputting to OFPP_NORMAL from an OpenFlow
901 controller. In situations where this is not suitable, you can
902 implement VLAN handling yourself, e.g.:
904 - If a packet comes in on an access port, and the flow table
905 needs to send it out on a trunk port, then the flow can add
906 the appropriate VLAN tag with the "mod_vlan_vid" action.
908 - If a packet comes in on a trunk port, and the flow table
909 needs to send it out on an access port, then the flow can
910 strip the VLAN tag with the "strip_vlan" action.
912 Q: I configured ports on a bridge as access ports with different VLAN
916 ovs-vsctl set-controller br0 tcp:192.168.0.10:6633
917 ovs-vsctl add-port br0 eth0
918 ovs-vsctl add-port br0 tap0 tag=9
919 ovs-vsctl add-port br0 tap1 tag=10
921 but the VMs running behind tap0 and tap1 can still communicate,
922 that is, they are not isolated from each other even though they are
925 A: Do you have a controller configured on br0 (as the commands above
926 do)? If so, then this is a variant on the previous question, "My
927 OpenFlow controller doesn't see the VLANs that I expect," and you
928 can refer to the answer there for more information.
936 A: VXLAN stands for Virtual eXtensible Local Area Network, and is a means
937 to solve the scaling challenges of VLAN networks in a multi-tenant
938 environment. VXLAN is an overlay network which transports an L2 network
939 over an existing L3 network. For more information on VXLAN, please see
940 the IETF draft available here:
942 http://tools.ietf.org/html/draft-mahalingam-dutt-dcops-vxlan-03
944 Q: How much of the VXLAN protocol does Open vSwitch currently support?
946 A: Open vSwitch currently supports the framing format for packets on the
947 wire. There is currently no support for the multicast aspects of VXLAN.
948 To get around the lack of multicast support, it is possible to
949 pre-provision MAC to IP address mappings either manually or from a
952 Q: What destination UDP port does the VXLAN implementation in Open vSwitch
955 A: By default, Open vSwitch will use the assigned IANA port for VXLAN, which
956 is 4789. However, it is possible to configure the destination UDP port
957 manually on a per-VXLAN tunnel basis. An example of this configuration is
961 ovs-vsctl add-port br0 vxlan1 -- set interface vxlan1
962 type=vxlan options:remote_ip=192.168.1.2 options:key=flow
963 options:dst_port=8472
966 Using OpenFlow (Manually or Via Controller)
967 -------------------------------------------
969 Q: What versions of OpenFlow does Open vSwitch support?
971 A: Open vSwitch 1.9 and earlier support only OpenFlow 1.0 (plus
972 extensions that bring in many of the features from later versions
975 Open vSwitch 1.10 and later have experimental support for OpenFlow
976 1.2 and 1.3. On these versions of Open vSwitch, the following
977 command enables OpenFlow 1.0, 1.2, and 1.3 on bridge br0:
979 ovs-vsctl set bridge br0 protocols=OpenFlow10,OpenFlow12,OpenFlow13
981 Open vSwitch version 1.12 and later will have experimental support
982 for OpenFlow 1.1, 1.2, and 1.3. On these versions of Open vSwitch,
983 the following command enables OpenFlow 1.0, 1.1, 1.2, and 1.3 on
986 ovs-vsctl set bridge br0 protocols=OpenFlow10,OpenFlow11,OpenFlow12,OpenFlow13
988 Use the -O option to enable support for later versions of OpenFlow
989 in ovs-ofctl. For example:
991 ovs-ofctl -O OpenFlow13 dump-flows br0
993 Support for OpenFlow 1.1, 1.2, and 1.3 is still incomplete. Work
994 to be done is tracked in OPENFLOW-1.1+ in the Open vSwitch sources
995 (also via http://openvswitch.org/development/openflow-1-x-plan/).
996 When support for a given OpenFlow version is solidly implemented,
997 Open vSwitch will enable that version by default.
999 Q: I'm getting "error type 45250 code 0". What's that?
1001 A: This is a Open vSwitch extension to OpenFlow error codes. Open
1002 vSwitch uses this extension when it must report an error to an
1003 OpenFlow controller but no standard OpenFlow error code is
1006 Open vSwitch logs the errors that it sends to controllers, so the
1007 easiest thing to do is probably to look at the ovs-vswitchd log to
1008 find out what the error was.
1010 If you want to dissect the extended error message yourself, the
1011 format is documented in include/openflow/nicira-ext.h in the Open
1012 vSwitch source distribution. The extended error codes are
1013 documented in lib/ofp-errors.h.
1015 Q1: Some of the traffic that I'd expect my OpenFlow controller to see
1016 doesn't actually appear through the OpenFlow connection, even
1017 though I know that it's going through.
1018 Q2: Some of the OpenFlow flows that my controller sets up don't seem
1019 to apply to certain traffic, especially traffic between OVS and
1020 the controller itself.
1022 A: By default, Open vSwitch assumes that OpenFlow controllers are
1023 connected "in-band", that is, that the controllers are actually
1024 part of the network that is being controlled. In in-band mode,
1025 Open vSwitch sets up special "hidden" flows to make sure that
1026 traffic can make it back and forth between OVS and the controllers.
1027 These hidden flows are higher priority than any flows that can be
1028 set up through OpenFlow, and they are not visible through normal
1029 OpenFlow flow table dumps.
1031 Usually, the hidden flows are desirable and helpful, but
1032 occasionally they can cause unexpected behavior. You can view the
1033 full OpenFlow flow table, including hidden flows, on bridge br0
1036 ovs-appctl bridge/dump-flows br0
1038 to help you debug. The hidden flows are those with priorities
1039 greater than 65535 (the maximum priority that can be set with
1042 The DESIGN file at the top level of the Open vSwitch source
1043 distribution describes the in-band model in detail.
1045 If your controllers are not actually in-band (e.g. they are on
1046 localhost via 127.0.0.1, or on a separate network), then you should
1047 configure your controllers in "out-of-band" mode. If you have one
1048 controller on bridge br0, then you can configure out-of-band mode
1051 ovs-vsctl set controller br0 connection-mode=out-of-band
1053 Q: I configured all my controllers for out-of-band control mode but
1054 "ovs-appctl bridge/dump-flows" still shows some hidden flows.
1056 A: You probably have a remote manager configured (e.g. with "ovs-vsctl
1057 set-manager"). By default, Open vSwitch assumes that managers need
1058 in-band rules set up on every bridge. You can disable these rules
1061 ovs-vsctl set bridge br0 other-config:disable-in-band=true
1063 This actually disables in-band control entirely for the bridge, as
1064 if all the bridge's controllers were configured for out-of-band
1067 Q: My OpenFlow controller doesn't see the VLANs that I expect.
1069 A: See answer under "VLANs", above.
1071 Q: I ran "ovs-ofctl add-flow br0 nw_dst=192.168.0.1,actions=drop"
1072 but I got a funny message like this:
1074 ofp_util|INFO|normalization changed ofp_match, details:
1075 ofp_util|INFO| pre: nw_dst=192.168.0.1
1078 and when I ran "ovs-ofctl dump-flows br0" I saw that my nw_dst
1079 match had disappeared, so that the flow ends up matching every
1082 A: The term "normalization" in the log message means that a flow
1083 cannot match on an L3 field without saying what L3 protocol is in
1084 use. The "ovs-ofctl" command above didn't specify an L3 protocol,
1085 so the L3 field match was dropped.
1087 In this case, the L3 protocol could be IP or ARP. A correct
1088 command for each possibility is, respectively:
1090 ovs-ofctl add-flow br0 ip,nw_dst=192.168.0.1,actions=drop
1094 ovs-ofctl add-flow br0 arp,nw_dst=192.168.0.1,actions=drop
1096 Similarly, a flow cannot match on an L4 field without saying what
1097 L4 protocol is in use. For example, the flow match "tp_src=1234"
1098 is, by itself, meaningless and will be ignored. Instead, to match
1099 TCP source port 1234, write "tcp,tp_src=1234", or to match UDP
1100 source port 1234, write "udp,tp_src=1234".
1102 Q: How can I figure out the OpenFlow port number for a given port?
1104 A: The OFPT_FEATURES_REQUEST message requests an OpenFlow switch to
1105 respond with an OFPT_FEATURES_REPLY that, among other information,
1106 includes a mapping between OpenFlow port names and numbers. From a
1107 command prompt, "ovs-ofctl show br0" makes such a request and
1108 prints the response for switch br0.
1110 The Interface table in the Open vSwitch database also maps OpenFlow
1111 port names to numbers. To print the OpenFlow port number
1112 associated with interface eth0, run:
1114 ovs-vsctl get Interface eth0 ofport
1116 You can print the entire mapping with:
1118 ovs-vsctl -- --columns=name,ofport list Interface
1120 but the output mixes together interfaces from all bridges in the
1121 database, so it may be confusing if more than one bridge exists.
1123 In the Open vSwitch database, ofport value -1 means that the
1124 interface could not be created due to an error. (The Open vSwitch
1125 log should indicate the reason.) ofport value [] (the empty set)
1126 means that the interface hasn't been created yet. The latter is
1127 normally an intermittent condition (unless ovs-vswitchd is not
1130 Q: I added some flows with my controller or with ovs-ofctl, but when I
1131 run "ovs-dpctl dump-flows" I don't see them.
1133 A: ovs-dpctl queries a kernel datapath, not an OpenFlow switch. It
1134 won't display the information that you want. You want to use
1135 "ovs-ofctl dump-flows" instead.
1137 Q: It looks like each of the interfaces in my bonded port shows up
1138 as an individual OpenFlow port. Is that right?
1140 A: Yes, Open vSwitch makes individual bond interfaces visible as
1141 OpenFlow ports, rather than the bond as a whole. The interfaces
1142 are treated together as a bond for only a few purposes:
1144 - Sending a packet to the OFPP_NORMAL port. (When an OpenFlow
1145 controller is not configured, this happens implicitly to
1148 - Mirrors configured for output to a bonded port.
1150 It would make a lot of sense for Open vSwitch to present a bond as
1151 a single OpenFlow port. If you want to contribute an
1152 implementation of such a feature, please bring it up on the Open
1153 vSwitch development mailing list at dev@openvswitch.org.
1155 Q: I have a sophisticated network setup involving Open vSwitch, VMs or
1156 multiple hosts, and other components. The behavior isn't what I
1159 A: To debug network behavior problems, trace the path of a packet,
1160 hop-by-hop, from its origin in one host to a remote host. If
1161 that's correct, then trace the path of the response packet back to
1164 Usually a simple ICMP echo request and reply ("ping") packet is
1165 good enough. Start by initiating an ongoing "ping" from the origin
1166 host to a remote host. If you are tracking down a connectivity
1167 problem, the "ping" will not display any successful output, but
1168 packets are still being sent. (In this case the packets being sent
1169 are likely ARP rather than ICMP.)
1171 Tools available for tracing include the following:
1173 - "tcpdump" and "wireshark" for observing hops across network
1174 devices, such as Open vSwitch internal devices and physical
1177 - "ovs-appctl dpif/dump-flows <br>" in Open vSwitch 1.10 and
1178 later or "ovs-dpctl dump-flows <br>" in earlier versions.
1179 These tools allow one to observe the actions being taken on
1180 packets in ongoing flows.
1182 See ovs-vswitchd(8) for "ovs-appctl dpif/dump-flows"
1183 documentation, ovs-dpctl(8) for "ovs-dpctl dump-flows"
1184 documentation, and "Why are there so many different ways to
1185 dump flows?" above for some background.
1187 - "ovs-appctl ofproto/trace" to observe the logic behind how
1188 ovs-vswitchd treats packets. See ovs-vswitchd(8) for
1189 documentation. You can out more details about a given flow
1190 that "ovs-dpctl dump-flows" displays, by cutting and pasting
1191 a flow from the output into an "ovs-appctl ofproto/trace"
1194 - SPAN, RSPAN, and ERSPAN features of physical switches, to
1195 observe what goes on at these physical hops.
1197 Starting at the origin of a given packet, observe the packet at
1198 each hop in turn. For example, in one plausible scenario, you
1201 1. "tcpdump" the "eth" interface through which an ARP egresses
1202 a VM, from inside the VM.
1204 2. "tcpdump" the "vif" or "tap" interface through which the ARP
1205 ingresses the host machine.
1207 3. Use "ovs-dpctl dump-flows" to spot the ARP flow and observe
1208 the host interface through which the ARP egresses the
1209 physical machine. You may need to use "ovs-dpctl show" to
1210 interpret the port numbers. If the output seems surprising,
1211 you can use "ovs-appctl ofproto/trace" to observe details of
1212 how ovs-vswitchd determined the actions in the "ovs-dpctl
1215 4. "tcpdump" the "eth" interface through which the ARP egresses
1216 the physical machine.
1218 5. "tcpdump" the "eth" interface through which the ARP
1219 ingresses the physical machine, at the remote host that
1222 6. Use "ovs-dpctl dump-flows" to spot the ARP flow on the
1223 remote host that receives the ARP and observe the VM "vif"
1224 or "tap" interface to which the flow is directed. Again,
1225 "ovs-dpctl show" and "ovs-appctl ofproto/trace" might help.
1227 7. "tcpdump" the "vif" or "tap" interface to which the ARP is
1230 8. "tcpdump" the "eth" interface through which the ARP
1231 ingresses a VM, from inside the VM.
1233 It is likely that during one of these steps you will figure out the
1234 problem. If not, then follow the ARP reply back to the origin, in
1237 Q: How do I make a flow drop packets?
1239 A: An empty set of actions causes a packet to be dropped. You can
1240 specify an empty set of actions with "actions=" on the ovs-ofctl
1241 command line. For example:
1243 ovs-ofctl add-flow br0 priority=65535,actions=
1245 would cause every packet entering switch br0 to be dropped.
1247 You can write "drop" explicitly if you like. The effect is the
1248 same. Thus, the following command also causes every packet
1249 entering switch br0 to be dropped:
1251 ovs-ofctl add-flow br0 priority=65535,actions=drop
1253 Q: I added a flow to send packets out the ingress port, like this:
1255 ovs-ofctl add-flow br0 in_port=2,actions=2
1257 but OVS drops the packets instead.
1259 A: Yes, OpenFlow requires a switch to ignore attempts to send a packet
1260 out its ingress port. The rationale is that dropping these packets
1261 makes it harder to loop the network. Sometimes this behavior can
1262 even be convenient, e.g. it is often the desired behavior in a flow
1263 that forwards a packet to several ports ("floods" the packet).
1265 Sometimes one really needs to send a packet out its ingress port.
1266 In this case, output to OFPP_IN_PORT, which in ovs-ofctl syntax is
1267 expressed as just "in_port", e.g.:
1269 ovs-ofctl add-flow br0 in_port=2,actions=in_port
1271 This also works in some circumstances where the flow doesn't match
1272 on the input port. For example, if you know that your switch has
1273 five ports numbered 2 through 6, then the following will send every
1274 received packet out every port, even its ingress port:
1276 ovs-ofctl add-flow br0 actions=2,3,4,5,6,in_port
1280 ovs-ofctl add-flow br0 actions=all,in_port
1282 Sometimes, in complicated flow tables with multiple levels of
1283 "resubmit" actions, a flow needs to output to a particular port
1284 that may or may not be the ingress port. It's difficult to take
1285 advantage of OFPP_IN_PORT in this situation. To help, Open vSwitch
1286 provides, as an OpenFlow extension, the ability to modify the
1287 in_port field. Whatever value is currently in the in_port field is
1288 the port to which outputs will be dropped, as well as the
1289 destination for OFPP_IN_PORT. This means that the following will
1290 reliably output to port 2 or to ports 2 through 6, respectively:
1292 ovs-ofctl add-flow br0 in_port=2,actions=load:0->NXM_OF_IN_PORT[],2
1293 ovs-ofctl add-flow br0 actions=load:0->NXM_OF_IN_PORT[],2,3,4,5,6
1295 If the input port is important, then one may save and restore it on
1298 ovs-ofctl add-flow br0 actions=push:NXM_OF_IN_PORT[],\
1299 load:0->NXM_OF_IN_PORT[],\
1301 pop:NXM_OF_IN_PORT[]
1303 Q: My bridge br0 has host 192.168.0.1 on port 1 and host 192.168.0.2
1304 on port 2. I set up flows to forward only traffic destined to the
1305 other host and drop other traffic, like this:
1307 priority=5,in_port=1,ip,nw_dst=192.168.0.2,actions=2
1308 priority=5,in_port=2,ip,nw_dst=192.168.0.1,actions=1
1309 priority=0,actions=drop
1311 But it doesn't work--I don't get any connectivity when I do this.
1314 A: These flows drop the ARP packets that IP hosts use to establish IP
1315 connectivity over Ethernet. To solve the problem, add flows to
1316 allow ARP to pass between the hosts:
1318 priority=5,in_port=1,arp,actions=2
1319 priority=5,in_port=2,arp,actions=1
1321 This issue can manifest other ways, too. The following flows that
1322 match on Ethernet addresses instead of IP addresses will also drop
1323 ARP packets, because ARP requests are broadcast instead of being
1324 directed to a specific host:
1326 priority=5,in_port=1,dl_dst=54:00:00:00:00:02,actions=2
1327 priority=5,in_port=2,dl_dst=54:00:00:00:00:01,actions=1
1328 priority=0,actions=drop
1330 The solution already described above will also work in this case.
1331 It may be better to add flows to allow all multicast and broadcast
1334 priority=5,in_port=1,dl_dst=01:00:00:00:00:00/01:00:00:00:00:00,actions=2
1335 priority=5,in_port=2,dl_dst=01:00:00:00:00:00/01:00:00:00:00:00,actions=1
1340 bugs@openvswitch.org
1341 http://openvswitch.org/