2 ------------------------
3 - New "VLAN splinters" feature to work around buggy device drivers
4 in old Linux versions. (This feature is deprecated. When
5 broken device drivers are no longer in widespread use, we will
6 delete this feature.) See ovs-vswitchd.conf.db(5) for more
9 - Added ability to match on IPv6 flow label through NXM.
10 - Added ability to match on ECN bits in IPv4 and IPv6 through NXM.
11 - Added ability to match on TTL in IPv4 and IPv6 through NXM.
12 - Added ability to modify ECN bits in IPv4.
13 - Added ability to modify TTL in IPv4.
15 - Track packet and byte statistics sent on mirrors.
17 - New "fdb/flush" command to flush bridge's MAC learning table.
19 - A new distributed testing tool that allows one to diagnose performance
20 and connectivity issues. This tool currently is not included in RH or
22 - RHEL packaging now supports integration with Red Hat network scripts.
26 ------------------------
28 - Added an OpenFlow extension which allows the "output" action to accept
30 - Added an OpenFlow extension for flexible learning.
31 - Bumped number of NXM registers from four to five.
33 - New "version" command to determine version of running daemon.
34 - If no argument is provided for "cfm/show", displays detailed
35 information about all interfaces with CFM enabled.
36 - If no argument is provided for "lacp/show", displays detailed
37 information about all ports with LACP enabled.
39 - New "set-if" command to modify a datapath port's configuration.
41 - The software switch now supports 255 OpenFlow tables, instead
42 of just one. By default, only table 0 is consulted, but the
43 new NXAST_RESUBMIT_TABLE action can look up in additional
44 tables. Tables 128 and above are reserved for use by the
45 switch itself; please use only tables 0 through 127.
46 - Add support for 802.1D spanning tree (STP).
47 - Fragment handling extensions:
48 - New OFPC_FRAG_NX_MATCH fragment handling mode, in which L4
49 fields are made available for matching in fragments with
51 - New NXM_NX_IP_FRAG match field for matching IP fragments (usable
52 via "ip_frag" in ovs-ofctl).
53 - New ovs-ofctl "get-frags" and "set-frags" commands to get and set
54 fragment handling policy.
55 - CAPWAP tunneling now supports an extension to transport a 64-key. By
56 default it remains compatible with the old version and other
57 standards-based implementations.
58 - Flow setups are now processed in a round-robin manner across ports
59 to prevent any single client from monopolizing the CPU and conducting
60 a denial of service attack.
61 - Added support for native VLAN tagging. A new "vlan_mode"
62 parameter can be set for "port". Possible values: "access",
63 "trunk", "native-tagged" and "native-untagged".
64 - test-openflowd has been removed. Please use ovs-vswitchd instead.
67 ------------------------
68 - New "ofproto" abstraction layer to ease porting to hardware
70 - Packaging for Red Hat Enterprise Linux 5.6 and 6.0.
71 - Datapath support for Linux kernels up to 3.0.
73 - New "bundle" and "bundle_load" action extensions.
75 - Implement table unique constraints.
76 - Support cooperative locking between callers.
78 - New "-s" option for "show" command prints packet and byte
79 counters for each port.
81 - New "--readd" option for "replace-flows".
83 - New "show" command to print an overview of configuration.
84 - New "comment" command to add remark that explains intentions.
85 - ovs-brcompatd has been rewritten to fix long-standing bugs.
86 - ovs-openflowd has been renamed test-openflowd and moved into the
87 tests directory. Its presence confused too many users. Please
88 use ovs-vswitchd instead.
89 - New ovs-benchmark utility to test flow setup performance.
90 - A new log level "off" has been added. Configuring a log facility
91 "off" prevents any messages from being logged to it. Previously,
92 "emer" was effectively "off" because no messages were ever logged at
93 level "emer". Now, errors that cause a process to exit are logged
95 - "configure" option --with-l26 has been renamed --with-linux, and
96 --with-l26-source has been renamed --with-linux-source. The old
97 names will be removed after the next release, so please update
99 - The "-2.6" suffix has been dropped from the datapath/linux-2.6 and
100 datapath/linux-2.6/compat-2.6 directories.
102 - Dropped support for "tun_id_from_cookie" OpenFlow extension.
103 Please use the extensible match extensions instead.
104 - Removed the Maintenance_Point and Monitor tables in an effort
105 to simplify 802.1ag configuration.
106 - Performance and scalability improvements
110 ------------------------
111 - Ability to define policies over IPv6
114 - Support for extensible match extensions to OpenFlow
116 - Support for HFSC qdisc.
117 - Queue used by in-band control can now be configured.
119 - Kernel<->userspace interface has been reworked and should be
120 close to a stable ABI now.
121 - "Port group" concept has been dropped.
122 - GRE over IPSEC tunnels
124 - New active backup bonding mode.
125 - New L4 hashing support when LACP is enabled.
126 - Source MAC hash now includes VLAN field also.
128 - Greatly improved handling of large flow tables
130 - "show" command now prints full vport configuration.
131 - "dump-groups" command removed since kernel support for
132 port groups was dropped.
134 - New commands for working with the new Managers table.
135 - "list" command enhanced with new formatting options and --columns
137 - "get" command now accepts new --id option.
138 - New "find" command.
140 - New "queue-stats" command for printing queue stats.
141 - New commands "replace-flows" and "diff-flows".
142 - Commands to add and remove flows can now read from files.
143 - New --flow-format option to enable or disable NXM.
144 - New --more option to increase OpenFlow message verbosity.
145 - Removed "tun-cookie" command, which is no longer useful.
146 - ovs-controller enhancements for testing various features.
147 - New ovs-vlan-test command for testing for Linux kernel driver VLAN
148 bugs. New ovs-vlan-bug-workaround command for enabling and
149 disabling a workaround for these driver bugs.
151 - "Resubmit" actions now update flow statistics.
152 - New "register" extension for use in matching and actions, via NXM.
153 - New "multipath" experimental action extension.
154 - New support for matching multicast Ethernet frames, via NXM.
155 - New extension for OpenFlow vendor error codes.
156 - New extension to set the QoS output queue without actually
157 sending to an output port.
158 - Open vSwitch now reports a single flow table, instead of
159 separate hash and wildcard tables. This better models the
160 current implementation.
161 - New experimental "note" action.
162 - New "ofproto/trace" ovs-appctl command and associated utilities
163 to ease debugging complex flow tables.
165 - Schema documentation now includes an entity-relationship diagram.
166 - The database is now garbage collected. In most tables,
167 unreferenced rows will be deleted automatically.
168 - Many tables now include statistics updated periodically by
169 ovs-vswitchd or ovsdb-server.
170 - Every table now has an "external-ids" column for use by OVS
172 - There is no default controller anymore. Each bridge must have its
173 controller individually specified.
174 - The "fail-mode" is now a property of a Bridge instead of a Controller.
175 - New versioning and checksum features.
176 - New Managers table and manager_options column in Open_vSwitch table
177 for specifying managers. The old "managers" column in the
178 Open_vSwitch table has been removed.
179 - Many "name" columns are now immutable.
181 - Dropped support for XenServer pre-5.6.100.
182 - Dropped support for Linux pre-2.6.18.
183 - Dropped controller discovery support.
184 - Dropped "ovs-ofctl status" and the OpenFlow extension that it used.
185 Statistics reporting in the database is a rough equivalent.
186 - Dropped the "corekeeper" package (now separate, at
187 http://openvswitch.org/cgi-bin/gitweb.cgi?p=corekeeper).
188 - Performance and scalability improvements
191 v1.1.0pre2 - 13 Sep 2010
192 ------------------------
195 v1.1.0pre1 - 31 Aug 2010
196 ------------------------
197 - OpenFlow 1.0 slicing (QoS) functionality
198 - Python bindings for configuration database (no write support)
199 - Performance and scalability improvements
204 - New "patch" interface type
209 - Configuration database with remote management
212 - Support for XenServer 5.5 and 5.6
213 - Performance and scalability improvements
216 v0.99.2 - 18 Feb 2010
217 ---------------------
220 v0.99.1 - 25 Jan 2010
221 ---------------------
222 - Add support for sFlow(R)
223 - Make headers compatible with C++
226 v0.99.0 - 14 Jan 2010
227 ---------------------
228 - User-space forwarding engine
231 v0.90.7 - 29 Nov 2009
232 ---------------------
233 - Add support for NetFlow active timeouts
240 v0.90.5 - 21 Sep 2009
241 ---------------------
242 - Generalize in-band control to more diverse network setups