1 openvswitch (1.10.0-1) unstable; urgency=low
4 - Bridge compatibility support has been removed. Any uses that
5 rely on ovs-brcompatd will have to stick with Open vSwitch 1.9.x
6 or adapt to native Open vSwitch support (e.g. use ovs-vsctl instead
8 - The maximum size of the MAC learning table is now configurable.
9 - With the Linux datapath, packets for new flows are now queued
10 separately on a per-port basis, so it should no longer be
11 possible for a large number of new flows arriving on one port to
12 prevent new flows from being processed on other ports.
13 - Many "ovs-vsctl" database commands now accept an --if-exists option.
14 Please refer to the ovs-vsctl manpage for details.
16 - Experimental support for newer versions of OpenFlow. See
17 the "What versions of OpenFlow does Open vSwitch support?"
18 question in the FAQ for more details.
19 - The OpenFlow "dp_desc" may now be configured by setting the
20 value of other-config:dp-desc in the Bridge table.
21 - It is possible to request the OpenFlow port number with the
22 "ofport_request" column in the Interface table.
24 - New support for the VXLAN tunnel protocol (see the IETF draft here:
25 http://tools.ietf.org/html/draft-mahalingam-dutt-dcops-vxlan-02).
26 - Tunneling requires the version of the kernel module paired with
27 Open vSwitch 1.9.0 or later.
28 - Inheritance of the Don't Fragment bit in IP tunnels (df_inherit)
29 is no longer supported.
30 - Path MTU discovery is no longer supported.
32 - The "dump-flows" and "del-flows" no longer require an argument
33 if only one datapath exists.
35 - New "vlog/disable-rate-limit" and "vlog/enable-rate-limit"
36 commands available allow control over logging rate limits.
37 - New "dpif/dump-dps", "dpif/show", and "dpif/dump-flows" command
38 that mimic the equivalent ovs-dpctl commands.
39 - The ofproto library is now responsible for assigning OpenFlow port
40 numbers. An ofproto implementation should assign them when
41 port_construct() is called.
42 - All dpif-based bridges of a particular type share a common
43 datapath called "ovs-<type>", e.g. "ovs-system". The ovs-dpctl
44 commands will now return information on that shared datapath. To
45 get the equivalent bridge-specific information, use the new
46 "ovs-appctl dpif/*" commands.
47 - Backward-incompatible changes:
48 - Earlier Open vSwitch versions treated ANY as a wildcard in flow
49 syntax. OpenFlow 1.1 adds a port named ANY, which introduces a
50 conflict. ANY was rarely used in flow syntax, so we chose to
51 retire that meaning of ANY in favor of the OpenFlow 1.1 meaning.
52 - Patch ports no longer require kernel support, so they now work
53 with FreeBSD and the kernel module built into Linux 3.3 and later.
55 -- Open vSwitch team <dev@openvswitch.org> Mon, 04 Feb 2013 21:52:34 -0700
57 openvswitch (1.9.0-1) unstable; urgency=low
59 * New upstream version
61 - Support for ipv6 set action.
62 - SKB mark matching and setting.
63 - support for Linux kernels up to 3.8
64 - FreeBSD is now a supported platform, thanks to code contributions from
65 Gaetano Catalli, Ed Maste, and Giuseppe Lettieri.
66 - ovs-bugtool: New --ovs option to report only OVS related information.
67 - New %t and %T log escapes to identify the subprogram within a
68 cooperating group of processes or threads that emitted a log message.
69 The default log patterns now include this information.
71 - Allow bitwise masking for SHA and THA fields in ARP, SLL and TLL
72 fields in IPv6 neighbor discovery messages, and IPv6 flow label.
73 - Adds support for writing to the metadata field for a flow.
75 - The tunneling code no longer assumes input and output keys are
76 symmetric. If they are not, PMTUD needs to be disabled for
77 tunneling to work. Note this only applies to flow-based keys.
78 - New support for a nonstandard form of GRE that supports a 64-bit key.
79 - Tunnel Path MTU Discovery default value was set to 'disabled'.
80 This feature is deprecated and will be removed soon.
81 - Tunnel header caching removed.
83 - Commands and actions that accept port numbers now also accept keywords
84 that represent those ports (such as LOCAL, NONE, and ALL). This is
85 also the recommended way to specify these ports, for compatibility
86 with OpenFlow 1.1 and later (which use the OpenFlow 1.0 numbers
87 for these ports for different purposes).
89 - Support requesting the port number with the "port_no" option in
91 - ovs-pki: The "online PKI" features have been removed, along with
92 the ovs-pki-cgi program that facilitated it, because of some
93 alarmist insecurity claims. We do not believe that these claims
94 are true, but because we do not know of any users for this
95 feature it seems better on balance to remove it. (The ovs-pki-cgi
96 program was not included in distribution packaging.)
97 - ovsdb-server now enforces the immutability of immutable columns. This
98 was not enforced in earlier versions due to an oversight.
99 - The following features are now deprecated. They will be removed no
100 earlier than February 2013. Please email dev@openvswitch.org with
102 - Bridge compatibility.
104 - The autopath action.
105 - Interface type "null".
106 - Numeric values for reserved ports (see "ovs-ofctl" note above).
107 - Tunnel Path MTU Discovery.
108 - CAPWAP tunnel support.
109 - The data in the RARP packets can now be matched in the same way as the
112 -- Open vSwitch team <dev@openvswitch.org> Wed, 24 Oct 2012 16:10:39 -0700
114 openvswitch (1.8.0-1) unstable; urgency=low
115 [ Open vSwitch team ]
116 * New upstream version
117 - New FAQ. Please send updates and additions!
118 - Authors of controllers, please read the new section titled "Action
119 Reproduction" in DESIGN, which describes an Open vSwitch change in
120 behavior in corner cases that may affect some controllers.
122 - A new test utility that can create L3 tunnel between two Open
123 vSwitches and detect connectivity issues.
125 - New --sort and --rsort options for "dump-flows" command.
126 - "mod-port" command can now control all OpenFlow config flags.
128 - Allow general bitwise masking for IPv4 and IPv6 addresses in
129 IPv4, IPv6, and ARP packets. (Previously, only CIDR masks
131 - Allow support for arbitrary Ethernet masks. (Previously, only
132 the multicast bit in the destination address could be individually
134 - New field OXM_OF_METADATA, to align with OpenFlow 1.1.
135 - The OFPST_QUEUE request now reports an error if a specified port or
136 queue does not exist, or for requests for a specific queue on all
137 ports, if the specified queue does not exist on any port. (Previous
138 versions generally reported an empty set of results.)
139 - New "flow monitor" feature to allow controllers to be notified of
140 flow table changes as they happen.
141 - Additional protocols are not mirrored and dropped when forward-bpdu is
142 false. For a full list, see the ovs-vswitchd.conf.db man page.
143 - Open vSwitch now sends RARP packets in situations where it previously
144 sent a custom protocol, making it consistent with behavior of QEMU and
146 - All Open vSwitch programs and log files now show timestamps in UTC,
147 instead the local timezone, by default.
149 -- Open vSwitch team <dev@openvswitch.org> Mon, 16 Jul 2012 16:44:52 +0900
151 openvswitch (1.7.0-1) unstable; urgency=low
152 [ Open vSwitch team ]
153 * New upstream version
154 - kernel modules are renamed. openvswitch_mod.ko is now
155 openvswitch.ko and brcompat_mod.ko is now brcompat.ko.
156 - Increased the number of NXM registers to 8.
157 - Added ability to configure dscp setting for manager and controller
158 connections. By default, these connections have a DSCP value of
159 Internetwork Control (0xc0).
160 - Added the granular link health statistics, 'cfm_health', to an
163 - Added support to mask nd_target for ICMPv6 neighbor discovery flows.
164 - Added support for OpenFlow 1.3 port description (OFPMP_PORT_DESC)
167 - Added the "dump-ports-desc" command to retrieve port
168 information using the new port description multipart messages.
170 - Added support for spawning ovs-test server from the client.
171 - Now ovs-test is able to automatically create test bridges and ports.
172 - "ovs-dpctl dump-flows" now prints observed TCP flags in TCP flows.
173 - Tripled flow setup performance.
174 - The "coverage/log" command previously available through ovs-appctl
175 has been replaced by "coverage/show". The new command replies with
176 coverage counter values, instead of logging them.
178 -- Open vSwitch team <dev@openvswitch.org> Mon, 30 Jul 2012 17:23:57 +0900
180 openvswitch (1.6.1-1) unstable; urgency=low
181 [ Open vSwitch team ]
182 * New upstream version
183 - Allow OFPP_CONTROLLER as the in_port for packet-out messages.
185 -- Open vSwitch team <dev@openvswitch.org> Mon, 25 Jun 2012 13:52:17 +0900
187 openvswitch (1.6.0-1) unstable; urgency=low
188 [ Open vSwitch team ]
189 * New upstream version
191 - LACP bonds no longer fall back to balance-slb when negotiations fail.
192 Instead they drop traffic.
193 - The default bond_mode changed from SLB to active-backup, to protect
194 unsuspecting users from the significant risks of SLB bonds (which are
195 documented in vswitchd/INTERNALS).
196 - Load balancing can be disabled by setting the bond-rebalance-interval
199 - Added support for bitwise matching on TCP and UDP ports.
200 See ovs-ofctl(8) for more information.
201 - NXM flow dumps now include times elapsed toward idle and hard
203 - Added an OpenFlow extension NXT_SET_ASYNC_CONFIG that allows
204 controllers more precise control over which OpenFlow messages they
205 receive asynchronously.
206 - New "fin_timeout" action.
207 - Added "fin_timeout" support to "learn" action.
208 - The default MAC learning timeout has been increased from 60 seconds
209 to 300 seconds. The MAC learning timeout is now configurable.
210 - When QoS settings for an interface do not configure a default queue
211 (queue 0), Open vSwitch now uses a default configuration for that
212 queue, instead of dropping all packets as in previous versions.
213 - Logging to console and file will have UTC timestamp as a default for all
214 the daemons. An example of the default format is 2012-01-27T16:35:17Z.
215 ovs-appctl can be used to change the default format as before.
216 - New support for limiting the number of flows in an OpenFlow flow
217 table, with configurable policy for evicting flows upon
218 overflow. See the Flow_Table table in ovs-vswitch.conf.db(5)
219 for more information.
220 - New "enable-async-messages" column in the Controller table. If set to
221 false, OpenFlow connections to the controller will initially have all
222 asynchronous messages disabled, overriding normal OpenFlow behavior.
223 - ofproto-provider interface:
224 - "struct rule" has a new member "used" that ofproto implementations
225 should maintain by updating with ofproto_rule_update_used().
227 - The new option --timestamp causes the "monitor" command to print
228 a timestamp with every update.
229 - CFM module CCM broadcasts can now be tagged with an 802.1p priority.
231 -- Open vSwitch team <dev@openvswitch.org> Fri, 24 Feb 2012 11:12:48 +0900
233 openvswitch (1.5.0-1) unstable; urgency=low
234 [ Open vSwitch team ]
235 * New upstream version
237 - Added support for querying, modifying, and deleting flows
238 based on flow cookie when using NXM.
239 - Added new NXM_PACKET_IN format.
241 - Added daemonization support to the monitor and snoop commands.
243 - The "find" command supports new set relational operators
244 {=}, {!=}, {<}, {>}, {<=}, and {>=}.
245 - ovsdb-tool now uses the typical database and schema installation
246 directories as defaults.
248 -- Open vSwitch team <dev@openvswitch.org> Fri, 01 June 2012 13:06:00 +0900
250 openvswitch (1.4.0+git20120426-1) unstable; urgency=low
252 * New upstream release fixing the following bugs:
253 o Broken log rotation.
254 o Use-after-free error when ports disappear.
255 o Minor memory leaks.
256 o Testsuite failures on big-endian architectures.
258 -- Ben Pfaff <pfaffben@debian.org> Thu, 26 Apr 2012 13:46:55 -0700
260 openvswitch (1.4.0+git20120321-1) unstable; urgency=low
262 * New upstream version including:
264 - ovs-vsctl: Allow "fake bridges" to be created for VLAN 0.
265 - vswitchd: Make the MAC entry aging time configurable.
266 - mac-learning: Increase MAC learning timeout to 300 seconds.
268 - netdev-linux: Fix use-after-free when netdev_dump_queues() deletes
270 - netlink-socket: Increase Netlink socket receive buffer size.
271 - ofproto: Fix code that keeps track of MTU.
272 - ovs-monitor-ipsec: Detect correctly IPSEC configuration changes
273 - bond: Incorrectly reported an error in appctl.
274 - socket-util: Unlink Unix domain sockets that bind but fail to connect.
275 - bridge: Remove unwanted ports at time of ofproto creation.
276 - dpif-linux: Make dpif_linux_port_query_by_name() query only one
278 - ofproto-dpif: Cleanup STP on ports when disabled on their bridge.
279 - configure: Try to extract kernel source directory from build Makefile.
280 - vswitchd: Always configure a default queue for QoS.
281 - ofproto-dpif: Don't output to in_port even if in_port is OFPP_LOCAL.
282 - sflow_agent: Use snprintf() in place of sprintf().
284 - Move PKI directory to FHS-compliant location. Closes: #661090.
285 Thanks to Andreas Beckmann <debian@abeckmann.de> for reporting
287 - Use a different way to avoid failing install without kernel module.
288 - Avoid unit test failure when doing "unofficial" builds.
289 - Bump standards-version to 3.9.3.
290 - Remove some useless files from the dkms package.
291 - Clean .pyc files in "clean" target.
292 - Remove po-debconf build dependency.
293 - Build-depend on python-all to pull in all Python versions.
294 - Add missing ${python:Depends} to openvswitch-test package.
295 - Improve long descriptions so as to better describe the packages.
296 - Bump debhelper compat level to 8 and make build-depends consistent.
297 - Fix exit status of openvswitch-switch init script "status" command.
298 - Use provided kernel source dir instead of host kernel version.
299 - Do not run "make" if "configure" fails during DKMS build.
300 - Look in /lib/modules instead of /usr/src for DKMS kernel sources.
301 - Fix dependencies for openvswitch-datapath-dkms package.
302 - Don't install Python modules for obsolete Python versions.
303 - Add dependency on ${misc:Depends} to openvswitch-test
304 o Documentation improvements:
305 - ovsdb-doc: Use minus sign in negative numbers in nroff output.
306 - ovsdb-doc: Convert '-' preceding a number as a minus sign, not a
308 - ovsdb-doc: Put NAME section into generated manpage.
309 - Fix typo in manpage.
310 - vswitchd: Document behavior of 802.1p priorities with VLAN splinters.
311 - netdev: Fix typo in error message.
312 - INSTALL.Linux: minor typo
314 * Many thanks to Thomas Goirand <zigo@debian.org> for contributing many
315 of the packaging fixes listed above.
317 * This version fixes most of the lintian errors described in bug
318 #663051, but a few remain, so this upload does not close that bug. I
319 believe that this upload should be suitable for downgrading that bug's
322 -- Ben Pfaff <pfaffben@debian.org> Wed, 21 Mar 2012 10:00:28 -0700
324 openvswitch (1.4.0-2+nmu1) unstable; urgency=low
326 * Non maintainer upload.
327 * Removes all patches in debian/patches, because they are patching stuff
328 inconditionally in debian/*, and this should be applied by default.
329 * Uses the correct ${kernel_source_dir} in debian/dkms.conf.in, so that
330 the kernel module builds as expected (Closes: #659685).
332 -- Thomas Goirand <zigo@debian.org> Thu, 08 Mar 2012 08:46:24 +0000
334 openvswitch (1.4.0-2) unstable; urgency=low
336 * Use explicit DKMS variable for kernel source directory
337 - 0001-debian-Fix-dependencies-for-openvswitch-datapath-dkm.patch
338 - 0002-debian-Look-in-lib-modules-instead-of-usr-src-for-DK.patch
339 - 0001-debian-Use-provided-kernel-source-dir.patch
340 - 0001-debian-Do-not-run-make-if-configure-fails-during-DKM.patch
342 * Don't install Python modules for obsolete Python versions
343 - 0001-debian-Don-t-install-Python-modules-for-obsolete-Pyt.patch
345 -- Simon Horman <horms@debian.org> Tue, 14 Feb 2012 11:43:13 +0900
347 openvswitch (1.4.0-1) unstable; urgency=low
348 [ Open vSwitch team ]
349 * New upstream version
350 - Compatible with Open vSwitch kernel module included in Linux 3.3.
351 - New "VLAN splinters" feature to work around buggy device drivers
352 in old Linux versions. (This feature is deprecated. When
353 broken device drivers are no longer in widespread use, we will
354 delete this feature.) See ovs-vswitchd.conf.db(5) for more
357 - Added ability to match on IPv6 flow label through NXM.
358 - Added ability to match on ECN bits in IPv4 and IPv6 through NXM.
359 - Added ability to match on TTL in IPv4 and IPv6 through NXM.
360 - Added ability to modify ECN bits in IPv4.
361 - Added ability to modify TTL in IPv4.
363 - Don't require the "normal" action to use mirrors. Traffic will
364 now be properly mirrored for any flows, regardless of their
366 - Track packet and byte statistics sent on mirrors.
368 - New "fdb/flush" command to flush bridge's MAC learning table.
370 - A new distributed testing tool that allows one to diagnose performance
371 and connectivity issues. This tool currently is not included in RH or
373 - RHEL packaging now supports integration with Red Hat network scripts.
374 - Debian: Depend on python (>= 2.7) | python-argparse instead of
375 python-argparse to avoid pulling in python2.6
378 -- Open vSwitch team <dev@openvswitch.org> Mon, 30 Jan 2012 23:36:00 +0000
380 openvswitch (1.3.0-1) unstable; urgency=low
381 [ Open vSwitch team ]
382 * New upstream version
384 - Added an OpenFlow extension which allows the "output" action to accept
386 - Added an OpenFlow extension for flexible learning.
387 - Bumped number of NXM registers from four to five.
389 - New "version" command to determine version of running daemon.
390 - If no argument is provided for "cfm/show", displays detailed
391 information about all interfaces with CFM enabled.
392 - If no argument is provided for "lacp/show", displays detailed
393 information about all ports with LACP enabled.
395 - The software switch now supports 255 OpenFlow tables, instead
396 of just one. By default, only table 0 is consulted, but the
397 new NXAST_RESUBMIT_TABLE action can look up in additional
398 tables. Tables 128 and above are reserved for use by the
399 switch itself; please use only tables 0 through 127.
400 - Add support for 802.1D spanning tree (STP).
401 - Fragment handling extensions:
402 - New OFPC_FRAG_NX_MATCH fragment handling mode, in which L4
403 fields are made available for matching in fragments with
405 - New NXM_NX_IP_FRAG match field for matching IP fragments (usable
406 via "ip_frag" in ovs-ofctl).
407 - New ovs-ofctl "get-frags" and "set-frags" commands to get and set
408 fragment handling policy.
409 - CAPWAP tunneling now supports an extension to transport a 64-key. By
410 default it remains compatible with the old version and other
411 standards-based implementations.
412 - Flow setups are now processed in a round-robin manner across ports
413 to prevent any single client from monopolizing the CPU and conducting
414 a denial of service attack.
415 - Added support for native VLAN tagging. A new "vlan_mode"
416 parameter can be set for "port". Possible values: "access",
417 "trunk", "native-tagged" and "native-untagged".
418 - test-openflowd has been removed. Please use ovs-vswitchd instead.
420 -- Open vSwitch team <dev@openvswitch.org> Mon, 09 Dec 2011 23:36:00 +0000
422 openvswitch (1.2.0-1) unstable; urgency=low
424 [ Open vSwitch team ]
425 * New upstream version
426 - New "ofproto" abstraction layer to ease porting to hardware
428 - Packaging for Red Hat Enterprise Linux 5.6 and 6.0.
429 - Datapath support for Linux kernels up to 3.0.
431 - New "bundle" and "bundle_load" action extensions.
433 - Implement table unique constraints.
434 - Support cooperative locking between callers.
436 - New "-s" option for "show" command prints packet and byte
437 counters for each port.
439 - New "--readd" option for "replace-flows".
441 - New "show" command to print an overview of configuration.
442 - New "comment" command to add remark that explains intentions.
443 - ovs-brcompatd has been rewritten to fix long-standing bugs.
444 - ovs-openflowd has been renamed test-openflowd and moved into the
445 tests directory. Its presence confused too many users. Please
446 use ovs-vswitchd instead.
447 - New ovs-benchmark utility to test flow setup performance.
448 - A new log level "off" has been added. Configuring a log facility
449 "off" prevents any messages from being logged to it. Previously,
450 "emer" was effectively "off" because no messages were ever logged at
451 level "emer". Now, errors that cause a process to exit are logged
453 - "configure" option --with-l26 has been renamed --with-linux, and
454 --with-l26-source has been renamed --with-linux-source. The old
455 names will be removed after the next release, so please update
457 - The "-2.6" suffix has been dropped from the datapath/linux-2.6 and
458 datapath/linux-2.6/compat-2.6 directories.
460 - Dropped support for "tun_id_from_cookie" OpenFlow extension.
461 Please use the extensible match extensions instead.
462 - Removed the Maintenance_Point and Monitor tables in an effort
463 to simplify 802.1ag configuration.
464 - Performance and scalability improvements
467 -- Open vSwitch team <dev@openvswitch.org> Wed, 03 Aug 2011 14:43:00 +0000
469 openvswitch (1.1.1-1) unstable; urgency=low
471 [ Open vSwitch team ]
475 * docs: Suppress warning marcro DD not defined
476 (upstream commit 58f870d0)
477 * debian: Make openvswitch depend on Python
478 (upstream commit aa41cb61)
479 * debian: Don't begin openvswitch-pki description with article.
480 (upstream commit bc6bb66)
481 * Debian: Add ${misc:Depends} dependency to python-openvswitch
482 * Debian: Update standards version from 3.9.1 to 3.9.2
483 * Debian: ${source:Version} dependency on python openvswitch
484 * Debian: ${source:Version} dependency for python openvswitch
485 * Switch to dpkg-source 3.0 (quilt) format
486 - For local non-debian/ patches (above)
488 -- Simon Horman <horms@debian.org> Wed, 15 Jun 2011 10:46:15 +0900
490 openvswitch (1.1.0-1) unstable; urgency=low
492 [ Open vSwitch team ]
493 * New upstream version
494 - Ability to define policies over IPv6
497 - Support for extensible match extensions to OpenFlow
499 - Support for HFSC qdisc.
500 - Queue used by in-band control can now be configured.
502 - Kernel<->userspace interface has been reworked and should be
503 close to a stable ABI now.
504 - "Port group" concept has been dropped.
505 - GRE over IPSEC tunnels
507 - New active backup bonding mode.
508 - New L4 hashing support when LACP is enabled.
509 - Source MAC hash now includes VLAN field also.
511 - Greatly improved handling of large flow tables
513 - "show" command now prints full vport configuration.
514 - "dump-groups" command removed since kernel support for
515 port groups was dropped.
517 - New commands for working with the new Managers table.
518 - "list" command enhanced with new formatting options and --columns
520 - "get" command now accepts new --id option.
521 - New "find" command.
523 - New "queue-stats" command for printing queue stats.
524 - New commands "replace-flows" and "diff-flows".
525 - Commands to add and remove flows can now read from files.
526 - New --flow-format option to enable or disable NXM.
527 - New --more option to increase OpenFlow message verbosity.
528 - Removed "tun-cookie" command, which is no longer useful.
529 - ovs-controller enhancements for testing various features.
530 - New ovs-vlan-test command for testing for Linux kernel driver VLAN
531 bugs. New ovs-vlan-bug-workaround command for enabling and
532 disabling a workaround for these driver bugs.
534 - "Resubmit" actions now update flow statistics.
535 - New "register" extension for use in matching and actions, via NXM.
536 - New "multipath" experimental action extension.
537 - New support for matching multicast Ethernet frames, via NXM.
538 - New extension for OpenFlow vendor error codes.
539 - New extension to set the QoS output queue without actually
540 sending to an output port.
541 - Open vSwitch now reports a single flow table, instead of
542 separate hash and wildcard tables. This better models the
543 current implementation.
544 - New experimental "note" action.
545 - New "ofproto/trace" ovs-appctl command and associated utilities
546 to ease debugging complex flow tables.
548 - Schema documentation now includes an entity-relationship diagram.
549 - The database is now garbage collected. In most tables,
550 unreferenced rows will be deleted automatically.
551 - Many tables now include statistics updated periodically by
552 ovs-vswitchd or ovsdb-server.
553 - Every table now has an "external-ids" column for use by OVS
555 - There is no default controller anymore. Each bridge must have its
556 controller individually specified.
557 - The "fail-mode" is now a property of a Bridge instead of a Controller.
558 - New versioning and checksum features.
559 - New Managers table and manager_options column in Open_vSwitch table
560 for specifying managers. The old "managers" column in the
561 Open_vSwitch table has been removed.
562 - Many "name" columns are now immutable.
564 - Dropped support for XenServer pre-5.6.100.
565 - Dropped support for Linux pre-2.6.18.
566 - Dropped controller discovery support.
567 - Dropped "ovs-ofctl status" and the OpenFlow extension that it used.
568 Statistics reporting in the database is a rough equivalent.
569 - Dropped the "corekeeper" package (now separate, at
570 http://openvswitch.org/cgi-bin/gitweb.cgi?p=corekeeper).
571 - Performance and scalability improvements
575 * Add the following fixes from upstream branch-1.1
576 - 7f1aca9 dpif-linux: Avoid logging error on ENOENT in
577 dpif_linux_is_internal_device().
578 - 8996f83 dpif-linux: Avoid segfault on netdev_get_stats() without kernel
580 - 002d4a3 vswitch: Improve schema documentation.
581 - 58bd294 cfm: Fix broken fault logic.
582 - c042664 bridge: Run once before configuring CFM.
583 * Switch to dpkg-source 3.0 (quilt) format
585 -- Simon Horman <horms@debian.org> Wed, 27 Apr 2011 17:11:10 +0900
587 openvswitch (1.1.0~pre2.g2.ea763e0e-1) unstable; urgency=low
589 * Git snapshot, including
590 - tests: Fix Y2011 bug in testsuite
593 -- Simon Horman <horms@debian.org> Wed, 12 Jan 2011 08:34:35 +0900
595 openvswitch (1.1.0~pre2.g1.bbe8d06e-1) unstable; urgency=low
599 -- Simon Horman <horms@debian.org> Thu, 06 Jan 2011 11:11:55 +0900
601 openvswitch (1.1.0~pre2-5) unstable; urgency=low
603 * Open vSwitch only works on Linux so set
604 the Architecture of binary packages to linux-any accordingly
606 -- Simon Horman <horms@debian.org> Tue, 23 Nov 2010 07:55:19 +0900
608 openvswitch (1.1.0~pre2-4) unstable; urgency=low
610 * Add procps to Build-Depends
613 -- Simon Horman <horms@debian.org> Tue, 16 Nov 2010 06:46:17 +0900
615 openvswitch (1.1.0~pre2-3) unstable; urgency=low
617 * Remove the corekeeper package as it isn't strongly related
618 to Open vSwitch. It has subsequently been broken off into
619 a separate source repository and may be uploaded as its
620 own debian source package.
621 http://openvswitch.org/cgi-bin/gitweb.cgi?p=corekeeper;a=summary
623 * Avoid the use of long socket names.
624 (closes: #602891, closes: #602911)
626 -- Simon Horman <horms@debian.org> Thu, 11 Nov 2010 06:35:05 +0900
628 openvswitch (1.1.0~pre2-2) unstable; urgency=low
630 * Clarify licensing of files in xenserver/
632 -- Simon Horman <horms@debian.org> Thu, 23 Sep 2010 10:56:18 +0900
634 openvswitch (1.1.0~pre2-1) unstable; urgency=low
636 * New upstream version
639 -- Simon Horman <horms@debian.org> Wed, 15 Sep 2010 18:28:59 +0900
641 openvswitch (1.1.0~pre1-1) unstable; urgency=low
643 * New upstream version
644 - OpenFlow 1.0 slicing (QoS) functionality
645 - Python bindings for configuration database (no write support)
646 - Performance and scalability improvements
649 -- Open vSwitch team <dev@openvswitch.org> Tue, 31 Aug 2010 23:20:00 +0000
651 openvswitch (1.0.1-1) unstable; urgency=low
653 * New upstream version.
655 -- Open vSwitch team <dev@openvswitch.org> Mon, 17 May 2010 10:36:00 +0000