Setting tag sliver-openvswitch-2.2.90-1
[sliver-openvswitch.git] / lib / poll-loop.c
1 /*
2  * Copyright (c) 2008, 2009, 2010, 2011, 2012, 2013, 2014 Nicira, Inc.
3  *
4  * Licensed under the Apache License, Version 2.0 (the "License");
5  * you may not use this file except in compliance with the License.
6  * You may obtain a copy of the License at:
7  *
8  *     http://www.apache.org/licenses/LICENSE-2.0
9  *
10  * Unless required by applicable law or agreed to in writing, software
11  * distributed under the License is distributed on an "AS IS" BASIS,
12  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
13  * See the License for the specific language governing permissions and
14  * limitations under the License.
15  */
16
17 #include <config.h>
18 #include "poll-loop.h"
19 #include <errno.h>
20 #include <inttypes.h>
21 #include <poll.h>
22 #include <stdlib.h>
23 #include <string.h>
24 #include "coverage.h"
25 #include "dynamic-string.h"
26 #include "fatal-signal.h"
27 #include "list.h"
28 #include "ovs-thread.h"
29 #include "seq.h"
30 #include "socket-util.h"
31 #include "timeval.h"
32 #include "vlog.h"
33 #include "hmap.h"
34 #include "hash.h"
35
36 VLOG_DEFINE_THIS_MODULE(poll_loop);
37
38 COVERAGE_DEFINE(poll_fd_wait);
39 COVERAGE_DEFINE(poll_zero_timeout);
40
41 struct poll_node {
42     struct hmap_node hmap_node;
43     struct pollfd pollfd;       /* Events to pass to time_poll(). */
44     HANDLE wevent;              /* Events for WaitForMultipleObjects(). */
45     const char *where;          /* Where poll_node was created. */
46 };
47
48 struct poll_loop {
49     /* All active poll waiters. */
50     struct hmap poll_nodes;
51
52     /* Time at which to wake up the next call to poll_block(), LLONG_MIN to
53      * wake up immediately, or LLONG_MAX to wait forever. */
54     long long int timeout_when; /* In msecs as returned by time_msec(). */
55     const char *timeout_where;  /* Where 'timeout_when' was set. */
56 };
57
58 static struct poll_loop *poll_loop(void);
59
60 /* Look up the node with same fd and wevent. */
61 static struct poll_node *
62 find_poll_node(struct poll_loop *loop, int fd, uint32_t wevent)
63 {
64     struct poll_node *node;
65
66     HMAP_FOR_EACH_WITH_HASH (node, hmap_node, hash_2words(fd, wevent),
67                              &loop->poll_nodes) {
68         if (node->pollfd.fd == fd && node->wevent == wevent) {
69             return node;
70         }
71     }
72     return NULL;
73 }
74
75 /* On Unix based systems:
76  *
77  *     Registers 'fd' as waiting for the specified 'events' (which should be
78  *     POLLIN or POLLOUT or POLLIN | POLLOUT).  The following call to
79  *     poll_block() will wake up when 'fd' becomes ready for one or more of the
80  *     requested events.  the 'fd's are given to poll() function later.
81  *
82  * On Windows system:
83  *
84  *     If both 'wevent' handle and 'fd' is specified, associate the 'fd' with
85  *     with that 'wevent' for 'events' (implemented in poll_block()).
86  *     In case of no 'fd' specified, wake up on any event on that 'wevent'.
87  *     These wevents are given to the WaitForMultipleObjects() to be polled.
88  *     The event registration is one-shot: only the following call to
89  *     poll_block() is affected.  The event will need to be re-registered after
90  *     poll_block() is called if it is to persist.
91  *
92  * ('where' is used in debug logging.  Commonly one would use poll_fd_wait() to
93  * automatically provide the caller's source file and line number for
94  * 'where'.) */
95 void
96 poll_fd_wait_at(int fd, HANDLE wevent, short int events, const char *where)
97 {
98     struct poll_loop *loop = poll_loop();
99     struct poll_node *node;
100
101     COVERAGE_INC(poll_fd_wait);
102
103 #ifdef _WIN32
104     /* Null event cannot be polled. */
105     if (wevent == 0) {
106         VLOG_ERR("No event to wait fd %d", fd);
107         return;
108     }
109 #endif
110
111     /* Check for duplicate.  If found, "or" the event. */
112     node = find_poll_node(loop, fd, wevent);
113     if (node) {
114         node->pollfd.events |= events;
115     } else {
116         node = xzalloc(sizeof *node);
117         hmap_insert(&loop->poll_nodes, &node->hmap_node,
118                     hash_2words(fd, wevent));
119         node->pollfd.fd = fd;
120         node->pollfd.events = events;
121         node->wevent = wevent;
122         node->where = where;
123     }
124 }
125
126 /* Causes the following call to poll_block() to block for no more than 'msec'
127  * milliseconds.  If 'msec' is nonpositive, the following call to poll_block()
128  * will not block at all.
129  *
130  * The timer registration is one-shot: only the following call to poll_block()
131  * is affected.  The timer will need to be re-registered after poll_block() is
132  * called if it is to persist.
133  *
134  * ('where' is used in debug logging.  Commonly one would use poll_timer_wait()
135  * to automatically provide the caller's source file and line number for
136  * 'where'.) */
137 void
138 poll_timer_wait_at(long long int msec, const char *where)
139 {
140     long long int now = time_msec();
141     long long int when;
142
143     if (msec <= 0) {
144         /* Wake up immediately. */
145         when = LLONG_MIN;
146     } else if ((unsigned long long int) now + msec <= LLONG_MAX) {
147         /* Normal case. */
148         when = now + msec;
149     } else {
150         /* now + msec would overflow. */
151         when = LLONG_MAX;
152     }
153
154     poll_timer_wait_until_at(when, where);
155 }
156
157 /* Causes the following call to poll_block() to wake up when the current time,
158  * as returned by time_msec(), reaches 'when' or later.  If 'when' is earlier
159  * than the current time, the following call to poll_block() will not block at
160  * all.
161  *
162  * The timer registration is one-shot: only the following call to poll_block()
163  * is affected.  The timer will need to be re-registered after poll_block() is
164  * called if it is to persist.
165  *
166  * ('where' is used in debug logging.  Commonly one would use
167  * poll_timer_wait_until() to automatically provide the caller's source file
168  * and line number for 'where'.) */
169 void
170 poll_timer_wait_until_at(long long int when, const char *where)
171 {
172     struct poll_loop *loop = poll_loop();
173     if (when < loop->timeout_when) {
174         loop->timeout_when = when;
175         loop->timeout_where = where;
176     }
177 }
178
179 /* Causes the following call to poll_block() to wake up immediately, without
180  * blocking.
181  *
182  * ('where' is used in debug logging.  Commonly one would use
183  * poll_immediate_wake() to automatically provide the caller's source file and
184  * line number for 'where'.) */
185 void
186 poll_immediate_wake_at(const char *where)
187 {
188     poll_timer_wait_at(0, where);
189 }
190
191 /* Logs, if appropriate, that the poll loop was awakened by an event
192  * registered at 'where' (typically a source file and line number).  The other
193  * arguments have two possible interpretations:
194  *
195  *   - If 'pollfd' is nonnull then it should be the "struct pollfd" that caused
196  *     the wakeup.  'timeout' is ignored.
197  *
198  *   - If 'pollfd' is NULL then 'timeout' is the number of milliseconds after
199  *     which the poll loop woke up.
200  */
201 static void
202 log_wakeup(const char *where, const struct pollfd *pollfd, int timeout)
203 {
204     static struct vlog_rate_limit rl = VLOG_RATE_LIMIT_INIT(10, 10);
205     enum vlog_level level;
206     int cpu_usage;
207     struct ds s;
208
209     cpu_usage = get_cpu_usage();
210     if (VLOG_IS_DBG_ENABLED()) {
211         level = VLL_DBG;
212     } else if (cpu_usage > 50 && !VLOG_DROP_INFO(&rl)) {
213         level = VLL_INFO;
214     } else {
215         return;
216     }
217
218     ds_init(&s);
219     ds_put_cstr(&s, "wakeup due to ");
220     if (pollfd) {
221         char *description = describe_fd(pollfd->fd);
222         if (pollfd->revents & POLLIN) {
223             ds_put_cstr(&s, "[POLLIN]");
224         }
225         if (pollfd->revents & POLLOUT) {
226             ds_put_cstr(&s, "[POLLOUT]");
227         }
228         if (pollfd->revents & POLLERR) {
229             ds_put_cstr(&s, "[POLLERR]");
230         }
231         if (pollfd->revents & POLLHUP) {
232             ds_put_cstr(&s, "[POLLHUP]");
233         }
234         if (pollfd->revents & POLLNVAL) {
235             ds_put_cstr(&s, "[POLLNVAL]");
236         }
237         ds_put_format(&s, " on fd %d (%s)", pollfd->fd, description);
238         free(description);
239     } else {
240         ds_put_format(&s, "%d-ms timeout", timeout);
241     }
242     if (where) {
243         ds_put_format(&s, " at %s", where);
244     }
245     if (cpu_usage >= 0) {
246         ds_put_format(&s, " (%d%% CPU usage)", cpu_usage);
247     }
248     VLOG(level, "%s", ds_cstr(&s));
249     ds_destroy(&s);
250 }
251
252 static void
253 free_poll_nodes(struct poll_loop *loop)
254 {
255     struct poll_node *node, *next;
256
257     HMAP_FOR_EACH_SAFE (node, next, hmap_node, &loop->poll_nodes) {
258         hmap_remove(&loop->poll_nodes, &node->hmap_node);
259         free(node);
260     }
261 }
262
263 /* Blocks until one or more of the events registered with poll_fd_wait()
264  * occurs, or until the minimum duration registered with poll_timer_wait()
265  * elapses, or not at all if poll_immediate_wake() has been called. */
266 void
267 poll_block(void)
268 {
269     struct poll_loop *loop = poll_loop();
270     struct poll_node *node;
271     struct pollfd *pollfds;
272     HANDLE *wevents = NULL;
273     int elapsed;
274     int retval;
275     int i;
276
277     /* Register fatal signal events before actually doing any real work for
278      * poll_block. */
279     fatal_signal_wait();
280
281     if (loop->timeout_when == LLONG_MIN) {
282         COVERAGE_INC(poll_zero_timeout);
283     }
284
285     timewarp_wait();
286     pollfds = xmalloc(hmap_count(&loop->poll_nodes) * sizeof *pollfds);
287
288 #ifdef _WIN32
289     wevents = xmalloc(hmap_count(&loop->poll_nodes) * sizeof *wevents);
290 #endif
291
292     /* Populate with all the fds and events. */
293     i = 0;
294     HMAP_FOR_EACH (node, hmap_node, &loop->poll_nodes) {
295         pollfds[i] = node->pollfd;
296 #ifdef _WIN32
297         wevents[i] = node->wevent;
298         if (node->pollfd.fd && node->wevent) {
299             short int wsa_events = 0;
300             if (node->pollfd.events & POLLIN) {
301                 wsa_events |= FD_READ | FD_ACCEPT | FD_CLOSE;
302             }
303             if (node->pollfd.events & POLLOUT) {
304                 wsa_events |= FD_WRITE | FD_CONNECT | FD_CLOSE;
305             }
306             WSAEventSelect(node->pollfd.fd, node->wevent, wsa_events);
307         }
308 #endif
309         i++;
310     }
311
312     retval = time_poll(pollfds, hmap_count(&loop->poll_nodes), wevents,
313                        loop->timeout_when, &elapsed);
314     if (retval < 0) {
315         static struct vlog_rate_limit rl = VLOG_RATE_LIMIT_INIT(1, 5);
316         VLOG_ERR_RL(&rl, "poll: %s", ovs_strerror(-retval));
317     } else if (!retval) {
318         log_wakeup(loop->timeout_where, NULL, elapsed);
319     } else if (get_cpu_usage() > 50 || VLOG_IS_DBG_ENABLED()) {
320         i = 0;
321         HMAP_FOR_EACH (node, hmap_node, &loop->poll_nodes) {
322             if (pollfds[i].revents) {
323                 log_wakeup(node->where, &pollfds[i], 0);
324             }
325             i++;
326         }
327     }
328
329     free_poll_nodes(loop);
330     loop->timeout_when = LLONG_MAX;
331     loop->timeout_where = NULL;
332     free(pollfds);
333     free(wevents);
334
335     /* Handle any pending signals before doing anything else. */
336     fatal_signal_run();
337
338     seq_woke();
339 }
340 \f
341 static void
342 free_poll_loop(void *loop_)
343 {
344     struct poll_loop *loop = loop_;
345
346     free_poll_nodes(loop);
347     hmap_destroy(&loop->poll_nodes);
348     free(loop);
349 }
350
351 static struct poll_loop *
352 poll_loop(void)
353 {
354     static struct ovsthread_once once = OVSTHREAD_ONCE_INITIALIZER;
355     static pthread_key_t key;
356     struct poll_loop *loop;
357
358     if (ovsthread_once_start(&once)) {
359         xpthread_key_create(&key, free_poll_loop);
360         ovsthread_once_done(&once);
361     }
362
363     loop = pthread_getspecific(key);
364     if (!loop) {
365         loop = xzalloc(sizeof *loop);
366         hmap_init(&loop->poll_nodes);
367         xpthread_setspecific(key, loop);
368     }
369     return loop;
370 }
371