2 # Thierry Parmentelat - INRIA Sophia Antipolis
8 # this extracts all specfiles and computes .mk from specfiles
9 # you need to specify PLDISTRO here if relevant - see below
11 # for more info on how to invoke this stuff
13 #################### (fedora) distributions
15 # (*) as of nov. 2007, myplc-devel is deprecated
16 # (*) instead, we create a fresh vserver that holds required tools (see e.g. planetlab-devel.lst)
17 # (*) the build uses the current fedora version as a target for the produced images
18 # (*) so you simply need to create a fedora 8 build image for building fedora-8 images
20 #################### (planetlab) distributions
22 # (*) see README-pldistros.txt
23 # (*) then you need to run
24 # make stage1=true PLDISTRO=onelab
27 # This build deals with 3 kinds of objects
29 # (*) packages are named upon the RPM name; they are mostly lowercase
30 # Add a package to ALL if you want it built as part of the default set.
31 # (*) modules are named after the subversion or git tree; we would wish to keep
32 # these names lowercase as far as possible
33 # (*) rpms are named in the spec files. A package typically defines several rpms;
34 # rpms are used for defining LOCAL-DEVEL-RPMS. See also package.rpmnames
36 # in simple cases, one package uses one module (in which case using the same name sounds right)
37 # but others might need several modules (e.g. image-creation packages like bootstrapfs need
38 # bootstrapfs and build); in this case the FIRST ONE is used for locating the specfile
40 #################### packages
41 # basics: how to build a package - you need to define the following variables
44 # a package needs one or several modules to build; the first one is used for
45 # some special purposes, like locating the specfile
47 # the package's specfile; this is relative to the FIRST module in package-MODULES
51 # (*) package-DEPEND-PACKAGES
52 # a set of (obviously local) *packages* that this package depends on, e.g.
53 # bootstrapfs-DEPEND-PACKAGES += kernel
54 # this impacts the order of the build
55 # (*) package-STOCK-DEVEL-RPMS
56 # a set of stock rpms that this package needs at build-time
57 # this can also be set in config.<distro>/devel.pkgs or config.planetlab/devel.pkgs as appropriate
58 # (*) package-LOCAL-DEVEL-RPMS
59 # a set of *local* rpms that the build will rpm-install before building <package>
60 # the build will attempt to uninstall those once the package is built, this is not fatal though
61 # this is intended to denote local rpms, i.e. ones that are results of our own build
62 # stock rpms should be mentioned in STOCK-DEVEL-RPMS or in devel.pkgs as described above
63 # (*) package-LOCAL-DEVEL-RPMS-CRUCIAL
64 # like package-LOCAL-DEVEL-RPMS but for crucial packages (like autoconf) that only need an update from our build
65 # rpms in this area will *not* be uninstalled after the target is made, because that would ruin the build vm for good
66 # (*) package-DEPEND-FILES
67 # a set of files that the package depends on - and that make needs to know about
68 # if this contains RPMS/yumgroups.xml, then the toplevel RPMS's index
69 # is refreshed with createrepo prior to running rpmbuild
70 # (*) package-SPECVARS
71 # space-separated list of spec variable definitions, where you can reference make variables that
72 # belong to packages defined BEFORE the current one
73 # note: you should use = to define these (as opposed to :=)
74 # e.g. mydriver-SPECVARS = foo=$(kernel-rpm-release)
75 # would let you use the %release from the kernel's package when rpmbuild'ing mydriver
77 # (*) package-RPMFLAGS: Miscellaneous RPM flags
78 # this is passed to rpmbuild, as well as to spec2make for "exporting" various rpm variable
79 # to make; beware that some features, like --with=debug or --define 'foo bar' are not
80 # well handled by spec2make as of this writing, which can cause issues.
81 # hopefully this will be fixed...
82 # (*) package-BUILD-FROM-SRPM: set this to any non-empty value,
83 # if your package is able to produce a source rpm.
84 # In this case the build will first invoke 'make srpm', and then rebuild binaries from that
85 # (*) package-RPMDATE: set this to any non-empty value to get the rpm package's release field hold the current date
86 # this is useful for container packages, like e.g. bootstrapfs or vserver, that contains much more than the
89 #################### modules
90 # Required information about the various modules (set this in e.g. planetlab-tags.mk)
94 # the complete path where this module lies;
95 # you can specify the trunk or a given tag with this variable
99 # which by analogy with svn revision scheme, is expected to be <url>@<tag>
101 #################### automatic variables
103 # the build defines some make variables that are extracted from spec files
104 # to inspect those, see for example
105 # (*) $ make ulogd-pkginfo
106 # to see the list f variables attached to a given package
107 # (*) $ make kernel-devel-rpminfo
108 # to see the list of variables attached to a given rpm
112 # exported to spec files as plrelease
113 PLANETLAB_RELEASE = 5.2
118 # minimal compat with macos, just so this does not complain
119 HOSTARCH := $(shell uname -i 2> /dev/null || uname -m 2> /dev/null)
120 DISTRO := $(shell ./getdistro.sh)
121 RELEASE := $(shell ./getrelease.sh)
122 DISTRONAME := $(shell ./getdistroname.sh)
124 #################### Makefile
130 PLDISTRO := planetlab
133 ########## envfrompreviousrun.mk holds PLDISTRO and others - it is generated at stage1 (see below)
135 include envfrompreviousrun.mk
138 # when re-running the nightly build after failure, we need to gather the former values
139 # do this by running make stage1=skip +PLDISTRO
140 ifeq "$(stage1)" "skip"
141 include envfrompreviousrun.mk
144 #################### include onelab.mk
145 # describes the set of components
146 PLDISTROCONTENTS := $(PLDISTRO).mk
147 include $(PLDISTROCONTENTS)
149 #################### include <pldistro>-tags.mk
150 # describes where to fetch components
151 ifeq "$(PLDISTROTAGS)" ""
152 PLDISTROTAGS := $(PLDISTRO)-tags.mk
154 include $(PLDISTROTAGS)
156 # this used to be set in the -tags.mk files, but that turned out to require
157 # error-prone duplicate changes
158 # so now the nightly build script sets this to what it is currently using
159 # in case we run this manually, i.e. if build-GITPATH is not set
160 ifeq "$(build-GITPATH)" ""
161 build-GITPATH := $(shell git config remote.origin.url)
164 #################### pldistros that are defined remotely
166 define remote_pldistro_fetch_svn
167 $(1).config.SVNPATH := $(shell grep -v "^#" config.$(1).svnpath)
168 config.$(1): config.$(1).svnpath
169 @echo "Fetching (svn) details for remote pldistro $(1)"
170 svn export $$($(1).config.SVNPATH) config.$(1)
174 define remote_pldistro_fetch_git
175 $(1).config.GITPATH := $(shell grep -v "^#" config.$(1).gitpath)
176 $(1).config.gitrepo := $$(firstword $$(subst @, ,$$($(1).config.GITPATH)))
177 $(1).config.gittag := $$(word 2,$$(subst @, ,$$($(1).config.GITPATH)))
178 $(1).config.gittag := $$(if $$($(1).config.gittag),$$($(1).config.gittag),master)
179 config.$(1): GITPATH=$(shell grep -v "^#" config.$(1).gitpath)
180 config.$(1): config.$(1).gitpath
181 @echo "Fetching (git) details for remote pldistro $(1)"
183 git $(GITTAG) archive --remote=$$($(1).config.gitrepo) $$($(1).config.gittag) | tar -C config.$(1) -xf -
188 define remote_pldistro
189 $(1).mk: config.$(1)/$(1).mk
190 @echo 'creating $(1) from config.$(1)'
191 cp config.$(1)/$(1).mk $(1).mk
193 $(2).mk: config.$(1)/$(2).mk
194 @echo 'creating $(2) tags from config.$(1)'
195 cp config.$(1)/$(2).mk $(2).mk
197 config.$(1)/$(1).mk: config.$(1)
198 config.$(1)/$(2).mk: config.$(1)
200 DISTCLEANS += $(1).mk $(2).mk config.$(1)
201 $(eval $(call remote_pldistro_fetch_$(3),$(1)))
204 ########## stage1 and stage1iter
205 # extract specs and compute .mk files by running
207 # entering stage1, we compute all the spec files
208 # then we use stage1iter to compute the .mk iteratively,
209 # ensuring that the n-1 first makefiles are loaded when creating the n-th one
210 # when stage1iter is set, it is supposed to be an index (starting at 1) in $(ALL)
212 ALLMKS := $(foreach package, $(ALL), MAKE/$(package).mk)
214 ### stage1iter : need some arithmetic, see
215 # http://www.cmcrossroads.com/articles/ask-mr.-make/learning-gnu-make-functions-with-arithmetic.html
216 ifneq "$(stage1iter)" ""
217 # the first n packages
218 packages := $(wordlist 1,$(words $(stage1iter)),$(ALL))
220 package := $(word $(words $(packages)),$(packages))
221 # the n-1 first packages
222 stage1iter_1 := $(wordlist 2,$(words $(stage1iter)),$(stage1iter))
223 previous := $(wordlist 1,$(words $(stage1iter_1)),$(ALL))
224 previousmks := $(foreach package,$(previous),MAKE/$(package).mk)
225 include $(previousmks)
228 @echo "========== stage1iter : $(package)"
229 # @echo "stage1iter : included .mk files : $(previousmks)"
230 all: $($(package).specpath)
231 all: MAKE/$(package).mk
237 @echo "========== stage1"
240 # specs and makes are done sequentially by stage1iter
243 arg=""; for n in $(ALL) ; do arg="$$arg x"; $(MAKE) --no-print-directory stage1iter="$$arg"; done
246 ### once .mks are OK, you can run make normally
253 # mention $(ALL) here rather than rpms
254 # this is because the inter-package dependencies are expressed like
255 # util-vserver: util-python
261 ### yumgroups.xml : compute from all known .pkgs files
264 ./yumgroups.sh $(PLDISTRO) > $@
266 createrepo = createrepo --quiet -g yumgroups.xml RPMS/
268 repo: RPMS/yumgroups.xml
275 # * we always use the first module's location (SVNPATH/GITPATH) to extract the spec file
276 # * no matter what SCM is used, SPEC should hold a relative path from the module's root
278 define stage1_package_vars
279 $(1).module := $(firstword $($(1)-MODULES))
280 $(1).specpath := SPECS/$(notdir $($(1)-SPEC))
281 $(1).moduledir := MODULES/$$($(1).module)
282 $(1).codespec := MODULES/$$($(1).module)/$($(1)-SPEC)
283 $(1).spec2makeflags := $(if $($(1)-WHITELIST-RPMS),--whitelist-rpms $($(1)-WHITELIST-RPMS),)
286 $(foreach package, $(ALL), $(eval $(call stage1_package_vars,$(package))))
288 # compute all modules
289 ALL.modules := build tests
290 $(foreach package,$(ALL), $(eval ALL.modules+=$($(package)-MODULES)))
291 ALL.modules:=$(sort $(ALL.modules))
293 # extract revision from -SVNPATH or tag from -GITPATH
294 define stage1_module_vars
295 ifneq "$($(1)-SVNPATH)" ""
296 $(1)-SVNPATH := $(strip $($(1)-SVNPATH))
297 $(1)-SCMPATH := $(strip $($(1)-SVNPATH))
299 $(1)-GITPATH := $$(strip $$($(1)-GITPATH))
300 $(1)-SCMPATH := $$(strip $$($(1)-GITPATH))
301 $(1).gitrepo := $$(firstword $$(subst @, ,$$($(1)-GITPATH)))
302 $(1).gittag := $$(word 2,$$(subst @, ,$$($(1)-GITPATH)))
303 $(1).gittag := $$(if $$($(1).gittag),$$($(1).gittag),master)
307 $(foreach module,$(ALL.modules), $(eval $(call stage1_module_vars,$(module))))
310 # for each package, compute whether we need to set date
311 # the heuristic is that we mention the date as part of the rpm release flag if
312 # (*) the package has requested it by setting package-RPMDATE (container packages should do that)
313 # (*) or SVNPATH contains 'trunk' or 'branches'
314 # (*) or GITPATH has no '@' (trunk)
315 # (*) or GITPATH contains a '@', and the gittag part has no '-' (this is to tell a tag from a branch..)
317 define package_hasdate
318 $(1).has-date = $(if $($(1)-RPMDATE),yes, \
319 $(if $($($(1).module)-SVNPATH), \
320 $(if $(findstring /trunk,$($($(1).module)-SVNPATH)),yes, \
321 $(if $(findstring /branches,$($($(1).module)-SVNPATH)),yes,)), \
322 $(if $(not $($($(1).module).gittag)), yes,\
323 $(if $(findstring -,$($($(1).module).gittag)),,yes))))
326 $(foreach package, $(ALL), $(eval $(call package_hasdate,$(package))))
328 ### the common header for generated specfiles
329 # useful when trying new specfiles manually
331 # note for fedora23 (and onwards, probably)
332 # many rpms wouldn't build as-is and issue an weird error
334 # Processing files: pl_sshd-debuginfo-1.0-11.lxc.x86_64
335 # error: Empty %files file /longbuildroot/BUILD/pl_sshd-1.0/debugfiles.list
337 # so to work around that we define debug_package as being nil
338 # only for f23 for now, let's see what this gives us..
340 (echo -n "# Generated by planetlab build on " ; date) > $@
341 echo "%define distro $(DISTRO)" >> $@
342 echo "%define distrorelease $(RELEASE)" >> $@
343 echo "%define distroname $(DISTRONAME)" >> $@
344 echo "%define pldistro $(PLDISTRO)" >> $@
345 echo "%define plrelease $(PLANETLAB_RELEASE)" >> $@
346 echo "# use MD5 and gzip for binary and source files" >> $@
347 echo "%global _binary_filedigest_algorithm 1" >> $@
348 echo "%global _source_filedigest_algorithm 1" >> $@
349 echo "%global _source_payload w9.gzdio" >> $@
350 echo "%global _binary_payload w9.gzdio" >> $@
351 echo "%define debug_package %{nil}" >> $@
353 ### make up spec file - extract module first
355 $($(1).specpath): header.spec $($(1).codespec)
357 cat header.spec > $($(1).specpath)
358 echo "%define SCMURL $($($(1).module)-SCMPATH)" >> $($(1).specpath)
359 $(if $($(1).has-date),echo "%define date $(shell date +%Y.%m.%d)" >> $($(1).specpath),)
360 $(if $($(1)-SPECVARS), \
361 $(foreach line,$($(1)-SPECVARS), \
362 echo "%define" $(word 1,$(subst =, ,$(line))) "$(word 2,$(subst =, ,$(line)))" >> $($(1).specpath) ;))
363 echo "# included from $($(1)-SPEC)" >> $($(1).specpath)
364 cat $($(1).codespec) >> $($(1).specpath)
366 $($(1).codespec): $($(1).moduledir)
370 $(foreach package,$(ALL),$(eval $(call target_spec,$(package))))
375 # $(1) is the name of a git module
376 # $($(1).gitrepo) and $(($1).gittag) are used to determine branch or tag name
378 # $(1)/ in the cwd will hold the result
381 define fetch_svn_module
382 svn export $($(1)-SVNPATH) $(1)
386 # as far as possible we use git-archive to fetch a git module
387 # however if that fails we fallback to a git-clone strategy,
388 # for when git-archive is not supported, e.g. for github
390 # $(1)/ gets cleaned up if job cannot be done
391 define fetch_git_module
393 ( git clone $($(1).gitrepo) $(1); cd $(1) ; git checkout $($(1).gittag) ; rm -rf .git ) || \
394 { rm -rf $(1); false; }
397 ### module extraction
398 define target_extract_module
400 @(echo -n "XXXXXXXXXXXXXXX -- BEG MODULE $(1) : $@ " ; date)
403 $(if $($(1)-SVNPATH),$(call fetch_svn_module,$(1)),$(call fetch_git_module,$(1)) )
404 @(echo -n "XXXXXXXXXXXXXXX -- END MODULE $(1) : $@ " ; date)
406 $(1)-module: MODULES/$(1)
410 $(foreach module,$(ALL.modules),$(eval $(call target_extract_module,$(module))))
422 # Base rpmbuild in the current directory
423 # issues on fedora 8 : see the following posts
424 # http://forums.fedoraforum.org/showthread.php?t=39625 - and more specifically post#6
425 # https://www.redhat.com/archives/fedora-devel-list/2007-November/msg00171.html
427 FAKEROOT=/longbuildroot
428 PWD=$(shell /bin/pwd)
429 ifeq "$(PWD)" "$(REALROOT)"
430 export HOME := $(FAKEROOT)
432 export HOME := $(PWD)
436 # build.common (getrpmmacros.sh) defines some utilities we want in place on our images
437 # in addition to these we set a few others for the build
439 ifeq "$(shell pwd)" "/build"
440 rm -f $(FAKEROOT) ; ln -s $(REALROOT) $(FAKEROOT)
443 echo "%_topdir $(HOME)" >> $@
444 echo "%_tmppath $(HOME)/tmp" >> $@
445 echo "%__spec_install_pre %{___build_pre}" >> $@
446 ./getrpmmacros.sh >> $@
448 ### this utility allows to extract various info from a spec file
449 ### and to define them in makefiles
450 # use the C code where it works as it's the original one, use the python code otherwise
451 spec2make: spec2make.py
452 ln -s spec2make.py $@
454 ### run spec2make on the spec file and include the result
455 # usage: spec2make package
456 # with old rpms (f8&c5) and too recent specfiles (the kernel), we need a patch to spec2make
457 # so when <package-NEEDSPECK2MAKEHACK is set, we run spec2make with the --hack flag
459 MAKE/$(1).mk: $($(1).specpath) spec2make .rpmmacros
461 ./spec2make $($(1).spec2makeflags) $($(1)-RPMFLAGS) $($(1).specpath) $(1) > MAKE/$(1).mk || { rm MAKE/$(1).mk; exit 1; }
464 $(foreach package,$(ALL),$(eval $(call target_mk,$(package))))
466 # stores env variables in a file
467 # this is done at stage1. later run won't get confused
468 STATIC_VARS=PLDISTRO PLDISTROTAGS build-GITPATH PERSONALITY MAILTO BASE WEBPATH TESTBUILDURL WEBROOT
469 # find out names for variables set on the command line
470 define assigned_varname
471 $(if $(findstring =,$(1)),$(firstword $(subst =, ,$(1))) )
473 ASSIGNED=$(filter-out stage1 stage1iter,$(foreach flag,$(MAKEFLAGS),$(call assigned_varname,$(flag))))
474 SAVED_VARS=$(sort $(STATIC_VARS) $(ASSIGNED))
475 envfrompreviousrun.mk:
476 @echo "# do not edit" > $@
477 @$(foreach var,$(SAVED_VARS),echo "$(var):=$($(var))" >> $@ ;)
478 @echo "# do not edit" > aliases
479 @echo -n "alias m=\"make " >> aliases
480 @$(foreach var,$(SAVED_VARS),echo -n " $(var)=$($(var))" >> aliases ;)
481 @echo "\"" >> aliases
482 @echo "alias m1=\"m stage1=true\"" >> aliases
484 envfrompreviousrun: envfrompreviousrun.mk
485 .PHONY: envfrompreviousrun
487 # always refresh this
488 all: envfrompreviousrun
490 #################### regular make
492 define stage2_variables
493 ### devel dependencies
494 $(1).rpmbuild = $(RPMBUILD) $($(1)-RPMFLAGS)
495 $(1).all-local-devel-rpm-paths := $(foreach rpm,$($(1)-LOCAL-DEVEL-RPMS) $($(1)-LOCAL-DEVEL-RPMS-CRUCIAL),$($(rpm).rpm-path))
496 $(1).depend-devel-packages := $(sort $(foreach rpm,$($(1)-LOCAL-DEVEL-RPMS),$($(rpm).package)))
497 ALL-STOCK-DEVEL-RPMS += $($(1)-LOCAL-DEVEL-RPMS)
500 $(foreach package,$(ALL),$(eval $(call stage2_variables,$(package))))
501 ALL-STOCK-DEVEL-RPMS := $(sort $(ALL-STOCK-DEVEL-RPMS))
504 ### pack sources into tarballs
505 ALLTARBALLS:= $(foreach package, $(ALL), $($(package).tarballs))
506 tarballs: $(ALLTARBALLS)
507 @echo $(words $(ALLTARBALLS)) source tarballs OK
510 SOURCES/%.tar.xz: SOURCES/%
511 tar chpJf $@ -C SOURCES $*
513 SOURCES/%.tar.bz2: SOURCES/%
514 tar chpjf $@ -C SOURCES $*
516 SOURCES/%.tar.gz: SOURCES/%
517 tar chpzf $@ -C SOURCES $*
519 SOURCES/%.tgz: SOURCES/%
520 tar chpzf $@ -C SOURCES $*
523 URLS/%: url=$(subst @colon@,:,$(subst @slash@,/,$(notdir $@)))
524 URLS/%: basename=$(notdir $(url))
526 echo curl $(url) -o SOURCES/$(basename)
529 ### the directory SOURCES/<package>-<version> is made
530 # with a (set of) copy -rl from MODULES/<module>
531 # the former is $(package.source)
532 ALLSOURCES:=$(foreach package, $(ALL), $($(package).source))
533 # so that make does not use the rule below directly for creating the tarball files
534 .SECONDARY: $(ALLSOURCES)
536 sources: $(ALLSOURCES)
537 @echo $(words $(ALLSOURCES)) versioned source trees OK
540 # argument is a package
541 # do things differently if multiple modules are mentioned (sigh..)
542 define target_copy_link_modules_sources
543 $($(1).source): $(foreach module,$($(1)-MODULES),MODULES/$(module))
544 $(if $(word 2,$($(1)-MODULES)),\
545 mkdir -p $($(1).source) && $(foreach module,$($(1)-MODULES), cp -rl MODULES/$(module) $($(1).source)/$(module);) ,\
546 mkdir -p SOURCES && cp -rl MODULES/$($(1)-MODULES) $($(1).source))
549 $(foreach package,$(ALL),$(eval $(call target_copy_link_modules_sources,$(package))))
552 ALLMODULES:=$(foreach module, $(ALL.modules), MODULES/$(module))
553 .SECONDARY: $(ALLMODULES)
554 modules: $(ALLMODULES)
555 @echo $(words $(ALLMODULES)) modules OK "(fetched from scm)"
559 ALLSRPMS:=$(foreach package,$(ALL),$($(package).srpm))
561 @echo $(words $(ALLSRPMS)) source rpms OK
564 #################### manage build requirements
566 RPMYUM-INSTALL-LOCAL := rpm --force -Uvh
567 RPMYUM-INSTALL-STOCK := yum -y install
568 # uninstall -- cannot force rpm -e
569 # need to ignore result, kernel-headers cannot be uninstalled as glibc depends on it
570 RPMYUM-UNINSTALL-STOCK := rpm -e
572 ### these macro handles the LOCAL-DEVEL-RPMS and LOCAL-DEVEL-RPMS-CRUCIAL tags for a given package
573 # before building : rpm-install LOCAL-DEVEL-RPMS
574 define rpmyum_install_local_rpms
575 $(if $($(1).all-local-devel-rpm-paths), echo "Installing for $(1)-LOCAL-DEVEL-RPMS" ; $(RPMYUM-INSTALL-LOCAL) $($(1).all-local-devel-rpm-paths))
578 # install stock rpms if defined
579 define rpmyum_install_stock_rpms
580 $(if $($(1)-STOCK-DEVEL-RPMS), echo "Installing for $(1)-STOCK-DEVEL-RPMS" ; $(RPMYUM-INSTALL-STOCK) $($(1)-STOCK-DEVEL-RPMS) || true)
583 define rpmyum_uninstall_stock_rpms
584 -$(if $($(1)-STOCK-DEVEL-RPMS), echo "Unstalling for $(1)-STOCK-DEVEL-RPMS" ; $(RPMYUM-UNINSTALL-STOCK) $($(1)-STOCK-DEVEL-RPMS) || true)
587 # similar for debians
588 # gdebi acts like yum localinstall; gdebi-core should be mentioned in develdeb.pkgs
589 DPKGAPT-INSTALL-LOCAL := gdebi
590 DPKGAPT-INSTALL-STOCK := apt-get -y install
591 DPKGAPT-UNINSTALL-STOCK := echo WARNING uninstalling stock debs not implemented
593 define dpkgapt_install_local_debs
594 $(if $($(1)-LOCAL-DEVEL-DEBS), echo "Installing for $(1)-LOCAL-DEVEL-DEBS" ; $(foreach debname,$($(1)-LOCAL-DEVEL-DEBS),$(DPKGAPT-INSTALL-LOCAL) $(wildcard DEBIAN/$(debname)_*.deb);))
597 define dpkgapt_install_stock_debs
598 $(if $($(1)-STOCK-DEVEL-DEBS), echo "Installing for $(1)-STOCK-DEVEL-DEBS" ; $(DPKGAPT-INSTALL-STOCK) $($(1)-STOCK-DEVEL-DEBS) || true)
601 define dpkgapt_uninstall_stock_debs
602 -$(if $($(1)-STOCK-DEVEL-DEBS), echo "Unstalling for $(1)-STOCK-DEVEL-DEBS" ; $(DPKGAPT-UNINSTALL-STOCK) $($(1)-STOCK-DEVEL-DEBS) || true)
607 # usage: target_source_rpm package
608 define target_source_rpm
609 ifeq "$($(1)-BUILD-FROM-SRPM)" ""
610 $($(1).srpm): $($(1).specpath) .rpmmacros $($(1).tarballs)
611 mkdir -p BUILD SRPMS tmp
612 @(echo -n "XXXXXXXXXXXXXXX -- BEG SRPM $(1) (using SOURCES) " ; date)
613 $(call rpmyum_install_stock_rpms,$(1))
614 $(call rpmyum_install_local_rpms,$(1))
615 $($(1).rpmbuild) -bs $($(1).specpath)
616 $(call rpmyum_uninstall_stock_rpms,$(1))
617 @(echo -n "XXXXXXXXXXXXXXX -- END SRPM $(1) " ; date)
619 $($(1).srpm): $($(1).specpath) .rpmmacros $($(1).source)
620 mkdir -p BUILD SRPMS tmp
621 @(echo -n "XXXXXXXXXXXXXXX -- BEG SRPM $(1) (using make srpm) " ; date)
622 $(call rpmyum_install_stock_rpms,$(1))
623 $(call rpmyum_install_local_rpms,$(1))
624 make -C $($(1).source) srpm SPECFILE=$(HOME)/$($(1).specpath) EXPECTED_SRPM=$(notdir $($(1).srpm)) && \
625 rm -f SRPMS/$(notdir $($(1).srpm)) && \
626 ln $($(1).source)/$(notdir $($(1).srpm)) SRPMS/$(notdir $($(1).srpm))
627 $(call rpmyum_uninstall_stock_rpms,$(1))
628 @(echo -n "XXXXXXXXXXXXXXX -- END SRPM $(1) " ; date)
632 $(foreach package,$(ALL),$(eval $(call target_source_rpm,$(package))))
634 ### binary rpms are made from source rpm
635 ALLRPMS:=$(foreach package,$(ALL),$($(package).rpms))
636 # same as above, mention $(ALL) and not $(ALLRPMS)
638 @echo $(words $(ALLRPMS)) binary rpms OK
641 # use tmp dirs when building binary rpm so make remains idempotent
642 # otherwise SOURCES/ or SPEC gets touched again - which leads to rebuilding
643 RPM-USE-TMP-DIRS = --define "_sourcedir $(HOME)/tmp" --define "_specdir $(HOME)/tmp"
644 RPM-USE-COMPILE-DIRS = --define "_sourcedir $(HOME)/COMPILE" --define "_specdir $(HOME)/COMPILE"
646 # usage: build_binary_rpm package
647 # xxx hacky - invoke createrepo if DEPEND-FILES mentions RPMS/yumgroups.xml
648 define target_binary_rpm
649 $($(1).rpms): $($(1).srpm)
651 @(echo -n "XXXXXXXXXXXXXXX -- BEG RPM $(1) " ; date)
652 $(if $(findstring RPMS/yumgroups.xml,$($(1)-DEPEND-FILES)), $(createrepo) , )
653 $(call rpmyum_install_stock_rpms,$(1))
654 $(call rpmyum_install_local_rpms,$(1))
655 $($(1).rpmbuild) --rebuild $(RPM-USE-TMP-DIRS) $($(1).srpm)
656 $(call rpmyum_uninstall_stock_rpms,$(1))
657 @(echo -n "XXXXXXXXXXXXXXX -- END RPM $(1) " ; date)
658 # for manual use only - in case we need to investigate the results of an rpmbuild
659 $(1)-compile: $($(1).srpm)
661 @(echo -n "XXXXXXXXXXXXXXX -- BEG compile $(1) " ; date)
662 $(if $(findstring RPMS/yumgroups.xml,$($(1)-DEPEND-FILES)), $(createrepo) , )
663 $(call rpmyum_install_stock_rpms,$(1))
664 $(call rpmyum_install_local_rpms,$(1))
665 $($(1).rpmbuild) --recompile $(RPM-USE-TMP-DIRS) $($(1).srpm)
666 $(call rpmyum_uninstall_stock_rpms,$(1))
667 @(echo -n "XXXXXXXXXXXXXXX -- END compile $(1) " ; date)
671 $(foreach package,$(ALL),$(eval $(call target_binary_rpm,$(package))))
673 # e.g. make proper -> does propers rpms
674 # usage shorthand_target package
675 define target_shorthand
678 $(1)-spec: $($(1)-SPEC)
682 $(1)-tarball: $($(1).tarballs)
685 $(1)-source: $($(1).source)
686 $(1)-rpms: $($(1).rpms)
688 $(1)-srpm: $($(1).srpm)
692 $(foreach package,$(ALL),$(eval $(call target_shorthand,$(package))))
694 ### file dependencies
695 define package_depends_on_file
700 define target_dependfiles
701 $(foreach file,$($(1)-DEPEND-FILES),$(eval $(call package_depends_on_file,$(1),$(file))))
704 $(foreach package,$(ALL),$(eval $(call target_dependfiles,$(package))))
706 ### package dependencies
707 define package_depends_on_package
710 $($(1).srpm):$($(2).rpms)
713 define target_depends
714 $(foreach package,$($(1)-DEPEND-PACKAGES) $($(1).depend-devel-packages),$(eval $(call package_depends_on_package,$(1),$(package))))
717 $(foreach package,$(ALL),$(eval $(call target_depends,$(package))))
721 ALL-DEBIAN := $(foreach target,$(ALL),$(target)-debian)
722 debian: $(ALL-DEBIAN)
725 # very rough for now (one module per package), targets only sfa for now
726 # the general idea here is, changing the specfile (for version number and all) is enough, and this
727 # gets passed to "make debian" in the module
728 # PREFIX: at one point we had passed PREFIX=/usr to this 'make debian'
729 # however it turned out we could manage this some other way (see manifold)
730 # so I'm reverting to simplicity
732 $(1)-debian: $(1)-tarball
733 $(call dpkgapt_install_local_debs,$(1))
734 $(call dpkgapt_install_stock_debs,$(1))
736 rsync -a MODULES/$($(1).module)/ DEBIAN/$(1)/
737 make -C DEBIAN/$(1) "RPMTARBALL=$(HOME)/$($(1).tarballs)" "RPMVERSION=$($(1).rpm-version)" "RPMRELEASE=$($(1).rpm-release)" "RPMNAME=$($(1).rpm-name)" debian
738 $(call dpkgapt_uninstall_stock_debs,$(1))
741 $(foreach package,$(ALL),$(eval $(call target_debian,$(package))))
744 # usage: target_clean package
747 $(foreach module,$($(1)-MODULES),rm -rf MODULES/$(module);)
748 .PHONY: $(1)-clean-modules
749 CLEANS += $(1)-clean-modules
751 rm -rf $($(1).source)
752 .PHONY: $(1)-clean-source
753 CLEANS += $(1)-clean-source
755 rm -rf $($(1).tarballs)
756 .PHONY: $(1)-clean-tarball
757 CLEANS += $(1)-clean-tarball
759 rm -rf BUILD/$(notdir $($(1).source))
760 CLEANS += $(1)-clean-build
763 .PHONY: $(1)-clean-rpms
764 CLEANS += $(1)-clean-rpms
767 .PHONY: $(1)-clean-srpm
768 CLEANS += $(1)-clean-srpm
771 .PHONY: $(1)-clean-srpm
772 CLEANS += $(1)-clean-srpm
773 $(1)-codeclean: $(1)-clean-source $(1)-clean-tarball $(1)-clean-build $(1)-clean-rpms $(1)-clean-srpm $(1)-clean-debian
774 $(1)-clean: $(1)-clean-modules $(1)-codeclean
775 .PHONY: $(1)-codeclean $(1)-clean
777 rm -rf $($(1).specpath)
778 .PHONY: $(1)-clean-spec
781 .PHONY: $(1)-clean-make
782 $(1)-distclean: $(1)-distclean1 $(1)-distclean2
783 $(1)-distclean1: $(1)-clean-spec $(1)-clean-make
784 $(1)-distclean2: $(1)-clean
785 .PHONY: $(1)-distclean $(1)-distclean1 $(1)-distclean2
788 $(foreach package,$(ALL),$(eval $(call target_clean,$(package))))
796 @echo Available clean targets
799 ### brute force clean
801 rm -rf envfrompreviousrun.mk .rpmmacros spec2make header.spec SPECS MAKE $(DISTCLEANS)
803 rm -rf MODULES SOURCES BUILD BUILDROOT RPMS SRPMS DEBIAN tmp
804 distclean: distclean1 distclean2
805 .PHONY: distclean1 distclean2 distclean
808 -$(RPMYUM-UNINSTALL-STOCK) $(ALL-STOCK-DEVEL-RPMS)
811 # gather build information for the 'About' page
812 # when run from crontab, INIT_CWD not properly set (says /root ..)
813 # so, the nightly build passes BASE here
814 # also store BASE in .base for any post-processing purposes
816 @echo 'Creating myplc-release'
818 echo "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx build info" >> $@
819 $(MAKE) --no-print-directory version-build >> $@
820 echo "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx svn info" >> $@
821 $(MAKE) --no-print-directory version-tags >> $@
822 echo "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx rpm info" >> $@
823 $(MAKE) --no-print-directory version-rpms >> $@
824 @echo $(BASE) > .base
827 @echo -n 'Build build-date: ' ; date '+%Y.%m.%d'
828 @echo -n 'Build build-time: ' ; date '+%H:%M-%Z'
829 @echo -n 'Build build-hostname: ' ; hostname
830 @echo "Build build-base: $(BASE)"
831 @echo "Build planetlab-distro: $(PLDISTRO)"
832 @echo "Build planetlab-tags: $(PLDISTROTAGS)"
833 @echo "Build target-arch: $(HOSTARCH)"
834 @echo "Build target-distro: $(DISTRO)"
835 @echo "Build target-distroname: $(DISTRONAME)"
836 @echo "Build target-release: $(RELEASE)"
837 @echo "Build target-personality: $(PERSONALITY)"
841 VFORMAT="%30s := %s\n"
842 define print_tag_target
844 @$(if $($(1)-SVNPATH),\
845 printf $(VFORMAT) $(1)-SVNPATH "$($(1)-SVNPATH)",\
846 printf $(VFORMAT) $(1)-GITPATH "$($(1)-GITPATH)" )
849 $(foreach module,$(ALL.modules), $(eval $(call print_tag_target,$(module))))
851 version-tags: $(foreach module, $(ALL.modules), $(module)-version-tag)
853 RFORMAT="%20s :: version=%s release=%s\n"
854 define rpm_version_target
856 @printf $(RFORMAT) $($(1).rpm-name) $($(1).rpm-version) $($(1).rpm-release)
857 version-rpms: $(1)-version-rpm
860 $(foreach package,$(sort $(ALL)), $(eval $(call rpm_version_target,$(package))))
862 versions: myplc-release version-build version-tags version-rpms
863 .PHONY: versions version-build version-rpms version-tags
865 #################### package info
866 PKGKEYS := tarballs source srpm rpms rpmnames rpm-release rpm-name rpm-version rpm-subversion
867 %-pkginfo: package=$(subst -pkginfo,,$@)
869 @$(foreach key,$(PKGKEYS),echo "$(package).$(key)=$($(package).$(key))";)
871 RPMKEYS := rpm-path package
872 %-rpminfo: rpm=$(subst -rpminfo,,$@)
874 @$(foreach key,$(RPMKEYS),echo "$(rpm).$(key)=$($(rpm).$(key))";)
876 #################### various lists - designed to run with stage1=true
878 @$(foreach package,$(ALL), echo package=$(package) ref_module=$($(package).module) modules=$($(package)-MODULES) rpmnames=$($(package).rpmnames); )
881 @$(foreach module,$(ALL.modules), echo module=$(module) \
882 $(if $($(module)-SVNPATH),svnpath=$($(module)-SVNPATH),gitpath=$($(module)-GITPATH)) ; )
885 @$(foreach module,$(ALL.modules), \
886 $(if $($(module)-BRANCH),echo module=$(module) branch=$($(module)-BRANCH);))
889 @$(foreach module,$(ALL.modules), \
890 $(if $($(module)-GITPATH), \
891 $(if $($(module)-BRANCH), \
892 echo $(module):$($(module)-BRANCH); , \
894 $(if $($(module)-BRANCH), \
895 echo $(module):$($(module)-BRANCH); , \
898 info: info-packages info-modules info-branches
900 .PHONY: info info-packages info-modules info-branches module-tools
903 @$(foreach package,$(ALL),$(if $(subst x1,,x$(words $($(package)-MODULES))), echo p=$(package) mods=$($(package)-MODULES) ;))
904 .PHONY: show-multi-modules
907 @echo "********** Run make in two stages:"
909 @echo "make stage1=true PLDISTRO=onelab"
910 @echo " -> extracts all spec files in SPECS/ and mk files in MAKE/"
911 @echo " as well as save PLDISTRO for subsequent runs"
913 @echo "********** Then you can use the following targets"
915 @echo " rebuilds everything"
916 @echo 'make util-vserver'
917 @echo " makes the RPMS related to util-vserver"
918 @echo " equivalent to 'make util-vserver-rpms'"
920 @echo "********** Or, vertically - step-by-step for a given package"
921 @echo 'make util-vserver-source'
922 @echo " creates source link in SOURCES/util-vserver-<version>"
923 @echo 'make util-vserver-tarball'
924 @echo " creates source tarball in SOURCES/util-vserver-<version>.<tarextension>"
925 @echo 'make util-vserver-srpm'
926 @echo " build source rpm in SRPMS/"
927 @echo 'make util-vserver-rpms'
928 @echo " build rpm(s) in RPMS/"
930 @echo "********** Or, horizontally, reach a step for all known packages"
932 @echo 'make tarballs'
936 @echo "********** Manual targets"
937 @echo "make package-compile"
938 @echo " The regular process uses rpmbuild --rebuild, that performs"
939 @echo " a compilation directory cleanup upon completion. If you need to investigate"
940 @echo " the intermediate compilation directory, use the -compile targets"
941 @echo "********** Cleaning examples"
943 @echo " removes the files made by make"
944 @echo "make distclean"
945 @echo " brute-force cleaning, removes entire directories - requires a new stage1"
946 @echo "make develclean"
947 @echo " rpm-uninstalls all devel packages installed during build"
949 @echo "make iptables-distclean"
950 @echo " deep clean for a given package"
951 @echo "make iptables-codeclean"
952 @echo " run this if you've made a local/manual change in the MODULES area for iptables"
954 @echo "make util-vserver-clean"
955 @echo " removes codebase, source, tarball, build, rpm and srpm for util-vserver"
956 @echo "make util-vserver-clean-modules"
957 @echo " and so on for source, tarball, build, rpm and srpm"
959 @echo "********** Info examples"
961 @echo " Displays the value of a given variable (here ALL)"
962 @echo " with only a single plus sign only the value is displayed"
964 @echo " is equivalent to make packages modules branches"
965 @echo " provides various info on these objects"
966 @echo "make ulogd-pkginfo"
967 @echo " Displays know attributes of a package"
968 @echo "make kernel-devel-rpminfo"
969 @echo " Displays know attributes of an rpm"
970 @echo "make stage1=true PLDISTROTAGS=planetlab-tags-4.2.mk packages modules branches module-tools"
971 @echo " Lists mentioned items - module-tools is used in modules.update"
973 @echo "********** Known pakages are"
976 #################### convenience, for debugging only
977 # make +foo : prints the value of $(foo)
978 # make ++foo : idem but verbose, i.e. foo=$(foo)
979 ++%: varname=$(subst +,,$@)
981 @echo "$(varname)=$($(varname))"
982 +%: varname=$(subst +,,$@)
984 @echo "$($(varname))"