2 # Thierry Parmentelat - INRIA Sophia Antipolis
4 ### $Id: Makefile 18118 2010-05-21 17:51:26Z thierry $
5 ### $URL: svn+ssh://thierry@svn.planet-lab.org/svn/build/trunk/Makefile $
10 # (*) make stage1=true
11 # this extracts all specfiles and computes .mk from specfiles
12 # you need to specify PLDISTRO here if relevant - see below
14 # for more info on how to invoke this stuff
16 #################### (fedora) distributions
18 # (*) as of nov. 2007, myplc-devel is deprecated
19 # (*) instead, we create a fresh vserver that holds required tools (see e.g. planetlab-devel.lst)
20 # (*) the build uses the current fedora version as a target for the produced images
21 # (*) so you simply need to create a fedora 8 build image for building fedora-8 images
23 #################### (planetlab) distributions
25 # (*) see README-pldistros.txt
26 # (*) then you need to run
27 # make stage1=true PLDISTRO=onelab
30 # This build deals with 3 kinds of objects
32 # (*) packages are named upon the RPM name; they are mostly lowercase
33 # Add a package to ALL if you want it built as part of the default set.
34 # (*) modules are named after the subversion tree; as of this writing their names
35 # are mostly mixed case like MyPLC or VserverReference
36 # (this is something we'll fix while moving to git)
37 # (*) rpms are named in the spec files. A package typically defines several rpms;
38 # rpms are used for defining DEPEND-DEVEL-RPMS. See also package.rpmnames
40 #################### packages
41 # basics: how to build a package - you need/may define the following variables
44 # a package needs one or several modules to build.
47 # the package's specfile; this is relative to the FIRST module in package-MODULES
51 # (*) package-SPECVARS
52 # space-separated list of spec variable definitions, where you can reference make variable that relate to
53 # packages defined BEFORE the current one (note: you should use = - as opposed to := - to define these)
54 # e.g. mydriver-SPECVARS = foo=$(kernel-rpm-release)
55 # would let you use the %release from the kernel's package when rpmbuild'ing mydriver - see automatic below
56 # (*) package-DEPEND-PACKAGES
57 # a set of *packages* that this package depends on
58 # (*) package-DEPEND-DEVEL-RPMS
59 # a set of *rpms* that the build will rpm-install before building <package>
60 # the build will attempt to uninstall those once the package is built, this is not fatal though
61 # this is intended to denote local rpms, i.e. ones that are results of our own build
62 # stock rpms should be mentioned in config.planetlab/devel.pkgs
63 # (*) package-DEPEND-FILES
64 # a set of files that the package depends on - and that make needs to know about
65 # if this contains RPMS/yumgroups.xml, then the toplevel RPMS's index
66 # is refreshed with createrepo prior to running rpmbuild
67 # (*) package-EXCLUDE-DEVEL-RPMS
68 # a set of *rpms* that the build will rpm-uninstall before building <package>
69 # this is intended to denote stock rpms, and the build will attempt to yum-install them
70 # back after the package is rebuilt
71 # (*) package-RPMFLAGS: Miscellaneous RPM flags
72 # (*) package-RPMBUILD: If not rpmbuild - mostly used for sudo'ing rpmbuild
73 # (*) package-BUILD-FROM-SRPM: set this to any non-empty value, if your package is able to produce
74 # a source rpms by running 'make srpm'
75 # (*) package-RPMDATE: set this to any non-empty value to get the rpm package's release field hold the current date
76 # this is useful for container packages, like e.g. bootstrapfs or vserver, that contains much more than the
79 #################### modules
80 # Required information about the various modules (set this in e.g. planetlab-tags.mk)
84 # the complete path where this module lies;
85 # you can specify the trunk or a given tag with this variable
89 # which by analogy with svn revision scheme, is expected to be <url>@<tag>
91 #################### automatic variables
93 # the build defines some make variables that are extracted from spec files
95 # (*) $ make ulogd-pkginfo
96 # to see the list f variables attached to a given package
97 # (*) $ make kernel-devel-rpminfo
98 # to see the list of variables attached to a given rpm
102 # exported to spec files as plrelease
103 PLANETLAB_RELEASE = 5.0
108 # minimal compat with macos, just so this does not complain
109 HOSTARCH := $(shell uname -i 2> /dev/null || uname -m 2> /dev/null)
110 DISTRO := $(shell ./getdistro.sh)
111 RELEASE := $(shell ./getrelease.sh)
112 DISTRONAME := $(shell ./getdistroname.sh)
113 RPM-INSTALL-DEVEL := rpm --force -Uvh
114 # uninstall -- cannot force rpm -e
115 # need to ignore result, kernel-headers cannot be uninstalled as glibc depends on it
116 RPM-UNINSTALL-DEVEL := rpm -e
117 YUM-INSTALL-DEVEL := yum -y install
120 REMOTE-PLDISTROS="wextoolbox"
122 #################### Makefile
128 PLDISTRO := planetlab
131 ########## savedpldistro.mk holds PLDISTRO - it is generated at stage1 (see below)
133 include savedpldistro.mk
136 # when re-running the nightly build after failure, we need to gather the former values
137 # do this by running make stage1=skip +PLDISTRO
138 ifeq "$(stage1)" "skip"
139 include savedpldistro.mk
142 #################### include onelab.mk
143 # describes the set of components
144 PLDISTROCONTENTS := $(PLDISTRO).mk
145 include $(PLDISTROCONTENTS)
147 #################### include <pldistro>-tags.mk
148 # describes where to fetch components
149 ifeq "$(PLDISTROTAGS)" ""
150 PLDISTROTAGS := $(PLDISTRO)-tags.mk
152 include $(PLDISTROTAGS)
154 # this used to be set in the -tags.mk files, but that turned out to require
155 # error-prone duplicate changes
156 # so now the nightly build script sets this to what it is currently using
157 # in case we run this manually, i.e. if neither build-SVNPATH nor build-GITPATH is set
158 ifeq "$(build-SVNPATH)$(build-GITPATH)" ""
159 build-GITPATH-local := $(shell git config remote.origin.url)
160 ifneq "$(build-GITPATH-local)" ""
161 build-GITPATH := $(build-GITPATH-local)
163 build-SVNPATH := $(lastword $(shell svn info 2> /dev/null | grep URL:))
168 define remote_pldistro
169 $(1).mk: config.$(1)/$(1).mk
170 @echo 'creating $(1) from config subdir'
171 cp config.$(1)/$(1).mk $(1).mk
173 $(2).mk: config.$(1)/$(2).mk
174 @echo 'creating $(1) tags from config subdir'
175 cp config.$(1)/$(2).mk $(2).mk
177 config.$(1)/$(1).mk: config.$(1)
178 config.$(1)/$(2).mk: config.$(1)
180 config.$(1): config.$(1).svnpath
181 @echo "Fetching details for pldistro $(1)"
182 svn export $(shell grep -v "^#" config.$(1).svnpath) config.$(1)
184 DISTCLEANS += $(1).mk $(2).mk config.$(1)
188 # somehow this does not work, handle manually instead
189 #$(foreach distro, $(REMOTE-PLDISTROS), $(eval $(call remote_pldistro,$(distro),$(distro)-tags)))
190 $(eval $(call remote_pldistro,wextoolbox,wextoolbox-tags))
192 ########## stage1 and stage1iter
193 # extract specs and compute .mk files by running
195 # entering stage1, we compute all the spec files
196 # then we use stage1iter to compute the .mk iteratively,
197 # ensuring that the n-1 first makefiles are loaded when creating the n-th one
198 # when stage1iter is set, it is supposed to be an index (starting at 1) in $(ALL)
200 ALLMKS := $(foreach package, $(ALL), MAKE/$(package).mk)
202 ### stage1iter : need some arithmetic, see
203 # http://www.cmcrossroads.com/articles/ask-mr.-make/learning-gnu-make-functions-with-arithmetic.html
204 ifneq "$(stage1iter)" ""
205 # the first n packages
206 packages := $(wordlist 1,$(words $(stage1iter)),$(ALL))
208 package := $(word $(words $(packages)),$(packages))
209 # the n-1 first packages
210 stage1iter_1 := $(wordlist 2,$(words $(stage1iter)),$(stage1iter))
211 previous := $(wordlist 1,$(words $(stage1iter_1)),$(ALL))
212 previousmks := $(foreach package,$(previous),MAKE/$(package).mk)
213 include $(previousmks)
216 @echo "========== stage1iter : $(package)"
217 # @echo "stage1iter : included .mk files : $(previousmks)"
218 all: $($(package).specpath)
219 all: MAKE/$(package).mk
225 @echo "========== stage1"
228 # specs and makes are done sequentially by stage1iter
231 arg=""; for n in $(ALL) ; do arg="$$arg x"; $(MAKE) --no-print-directory stage1iter="$$arg"; done
234 ### once .mks are OK, you can run make normally
241 # mention $(ALL) here rather than rpms
242 # this is because the inter-package dependencies are expressed like
243 # util-vserver: util-python
249 ### yumgroups.xml : compute from all known .pkgs files
252 ./yumgroups.sh $(PLDISTRO) > $@
254 createrepo = createrepo --quiet -g yumgroups.xml RPMS/
256 repo: RPMS/yumgroups.xml
263 # * we always use the first module's location (SVNPATH/GITPATH) to extract the spec file
264 # * no matter what SCM is used, SPEC should hold a relative path from the module's root
266 define stage1_package_vars
267 $(1).module := $(firstword $($(1)-MODULES))
268 $(1).specpath := SPECS/$(notdir $($(1)-SPEC))
269 $(1).moduledir := MODULES/$(firstword $($(1)-MODULES))
270 $(1).codespec := MODULES/$(firstword $($(1)-MODULES))/$($(1)-SPEC)
273 $(foreach package, $(ALL), $(eval $(call stage1_package_vars,$(package))))
275 # compute all modules
276 ALL.modules := build tests
277 $(foreach package,$(ALL), $(eval ALL.modules+=$($(package)-MODULES)))
278 ALL.modules:=$(sort $(ALL.modules))
280 # extract revision from -SVNPATH or tag from -GITPATH
281 define stage1_module_vars
282 ifneq "$($(1)-SVNPATH)" ""
283 $(1)-SVNPATH := $(strip $($(1)-SVNPATH))
285 $(1)-GITPATH := $(strip $($(1)-GITPATH))
286 $(1).gitrepo := $(firstword $(subst @, ,$($(1)-GITPATH)))
287 $(1).gittag := $(word 2,$(subst @, ,$($(1)-GITPATH)))
288 $(1).gittag := $(if $($(1).gittag),$($(1).gittag),master)
292 $(foreach module,$(ALL.modules), $(eval $(call stage1_module_vars,$(module))))
295 # for each package, compute whether we need to set date
296 # the heuristic is that we mention the date as part of the rpm release flag if
297 # (*) the package has requested it by setting package-RPMDATE (container packages should do that)
298 # (*) or SVNPATH contains 'trunk' or 'branches'
299 # (*) or GITPATH has no '@' (trunk)
300 # (*) or GITPATH contains a '@', and the gittag part has no '-' (this is to tell a tag from a branch..)
302 define package_hasdate
303 $(1).has-date = $(if $($(1)-RPMDATE),yes, \
304 $(if $($($(1).module)-SVNPATH), \
305 $(if $(findstring /trunk,$($($(1).module)-SVNPATH)),yes, \
306 $(if $(findstring /branches,$($($(1).module)-SVNPATH)),yes,)), \
307 $(if $(not $($($(1).module).gittag)), yes,\
308 $(if $(findstring -,$($($(1).module).gittag)),,yes))))
311 $(foreach package, $(ALL), $(eval $(call package_hasdate,$(package))))
313 ### the common header for generated specfiles
314 # useful when trying new specfiles manually
316 (echo -n "# Generated by planetlab build from $($(1)-SPEC) on " ; date) > $@
317 echo "%define distro $(DISTRO)" >> $@
318 echo "%define distrorelease $(RELEASE)" >> $@
319 echo "%define distroname $(DISTRONAME)" >> $@
320 echo "%define pldistro $(PLDISTRO)" >> $@
321 echo "%define plrelease $(PLANETLAB_RELEASE)" >> $@
322 echo "# use MD5 and gzip for binary and source files" >> $@
323 echo "%global _binary_filedigest_algorithm 1" >> $@
324 echo "%global _source_filedigest_algorithm 1" >> $@
325 echo "%global _source_payload w9.gzdio" >> $@
326 echo "%global _binary_payload w9.gzdio" >> $@
328 ### make up spec file - extract module first
330 $($(1).specpath): header.spec $($(1).codespec)
332 cat header.spec > $($(1).specpath)
333 $(if $($(1).has-date),echo "%define date $(shell date +%Y.%m.%d)" >> $($(1).specpath),)
334 $(if $($(1)-SPECVARS), \
335 $(foreach line,$($(1)-SPECVARS), \
336 echo "%define" $(word 1,$(subst =, ,$(line))) "$(word 2,$(subst =, ,$(line)))" >> $($(1).specpath) ;))
337 echo "# included from $($(1)-SPEC)" >> $($(1).specpath)
338 cat $($(1).codespec) >> $($(1).specpath)
340 $($(1).codespec): $($(1).moduledir)
344 $(foreach package,$(ALL),$(eval $(call target_spec,$(package))))
346 ### module extraction
347 define target_extract_module
349 @(echo -n "XXXXXXXXXXXXXXX -- BEG MODULE $(1) : $@ " ; date)
352 $(if $($(1)-SVNPATH),\
353 svn export $($(1)-SVNPATH) $(1),\
354 mkdir $(1) ; (git archive --remote=$($(1).gitrepo) $($(1).gittag) | tar -C $(1) -xf - ) \
355 || { rm -rf $(1); false; } )
356 @(echo -n "XXXXXXXXXXXXXXX -- END MODULE $(1) : $@ " ; date)
358 $(1)-module: MODULES/$(1)
362 $(foreach module,$(ALL.modules),$(eval $(call target_extract_module,$(module))))
365 # use this makefile to extract tests rather than extracting manually in vbuild-nightly
371 # Base rpmbuild in the current directory
372 # issues on fedora 8 : see the following posts
373 # http://forums.fedoraforum.org/showthread.php?t=39625 - and more specifically post#6
374 # https://www.redhat.com/archives/fedora-devel-list/2007-November/msg00171.html
376 FAKEROOT=/longbuildroot
377 PWD=$(shell /bin/pwd)
378 ifeq "$(PWD)" "$(REALROOT)"
379 export HOME := $(FAKEROOT)
381 export HOME := $(PWD)
384 ifeq "$(shell pwd)" "/build"
385 rm -f $(FAKEROOT) ; ln -s $(REALROOT) $(FAKEROOT)
388 echo "%_topdir $(HOME)" >> $@
389 echo "%_tmppath $(HOME)/tmp" >> $@
390 echo "%__spec_install_pre %{___build_pre}" >> $@
391 ./getrpmmacros.sh >> $@
393 ### this utility allows to extract various info from a spec file
394 ### and to define them in makefiles
395 spec2make: spec2make.c
396 $(CC) -g -Wall $< -o $@ -lrpm -lrpmbuild
398 ### run spec2make on the spec file and include the result
399 # usage: spec2make package
401 MAKE/$(1).mk: $($(1).specpath) spec2make .rpmmacros
403 ./spec2make $($(1)-RPMFLAGS) $($(1).specpath) $(1) > MAKE/$(1).mk || { rm MAKE/$(1).mk; exit 1; }
406 $(foreach package,$(ALL),$(eval $(call target_mk,$(package))))
408 # stores PLDISTRO in a file
409 # this is done at stage1. later run wont get confused
410 SAVED_VARS=PLDISTRO PLDISTROTAGS build-SVNPATH PERSONALITY MAILTO BASE WEBPATH TESTBUILDURL WEBROOT
412 @echo "# do not edit" > $@
413 @$(foreach var,$(SAVED_VARS),echo "$(var):=$($(var))" >> $@ ;)
414 @echo "# do not edit" > aliases
415 @echo -n "alias m=\"make " >> aliases
416 @$(foreach var,$(SAVED_VARS),echo -n " $(var)=$($(var))" >> aliases ;)
417 @echo "\"" >> aliases
418 @echo "alias m1=\"m stage1=true\"" >> aliases
420 savedpldistro: savedpldistro.mk
421 .PHONY: savedpldistro
423 # always refresh this
426 #################### regular make
428 define stage2_variables
429 ### devel dependencies
430 $(1).rpmbuild = $(if $($(1)-RPMBUILD),$($(1)-RPMBUILD),$(RPMBUILD)) $($(1)-RPMFLAGS)
431 $(1).all-devel-rpm-paths := $(foreach rpm,$($(1)-DEPEND-DEVEL-RPMS),$($(rpm).rpm-path))
432 $(1).depend-devel-packages := $(sort $(foreach rpm,$($(1)-DEPEND-DEVEL-RPMS),$($(rpm).package)))
433 ALL-DEVEL-RPMS += $($(1)-DEPEND-DEVEL-RPMS)
436 $(foreach package,$(ALL),$(eval $(call stage2_variables,$(package))))
437 ALL-DEVEL-RPMS := $(sort $(ALL-DEVEL-RPMS))
440 ### pack sources into tarballs
441 ALLTARBALLS:= $(foreach package, $(ALL), $($(package).tarballs))
442 tarballs: $(ALLTARBALLS)
443 @echo $(words $(ALLTARBALLS)) source tarballs OK
446 SOURCES/%.tar.bz2: SOURCES/%
447 tar chpjf $@ -C SOURCES $*
449 SOURCES/%.tar.gz: SOURCES/%
450 tar chpzf $@ -C SOURCES $*
452 SOURCES/%.tgz: SOURCES/%
453 tar chpzf $@ -C SOURCES $*
456 URLS/%: url=$(subst @colon@,:,$(subst @slash@,/,$(notdir $@)))
457 URLS/%: basename=$(notdir $(url))
459 echo curl $(url) -o SOURCES/$(basename)
462 ### the directory SOURCES/<package>-<version> is made
463 # with a (set of) copy -rl from MODULES/<module>
464 # the former is $(package.source)
465 ALLSOURCES:=$(foreach package, $(ALL), $($(package).source))
466 # so that make does not use the rule below directly for creating the tarball files
467 .SECONDARY: $(ALLSOURCES)
469 sources: $(ALLSOURCES)
470 @echo $(words $(ALLSOURCES)) versioned source trees OK
473 # argument is a package
474 # do things differently if multiple modules are mentioned (sigh..)
475 define target_copy_link_modules_sources
476 $($(1).source): $(foreach module,$($(1)-MODULES),MODULES/$(module))
477 $(if $(word 2,$($(1)-MODULES)),\
478 mkdir -p $($(1).source) && $(foreach module,$($(1)-MODULES), cp -rl MODULES/$(module) $($(1).source)/$(module);) ,\
479 mkdir -p SOURCES && cp -rl MODULES/$($(1)-MODULES) $($(1).source))
482 $(foreach package,$(ALL),$(eval $(call target_copy_link_modules_sources,$(package))))
485 ALLMODULES:=$(foreach module, $(ALL.modules), MODULES/$(module))
486 .SECONDARY: $(ALLMODULES)
487 modules: $(ALLMODULES)
488 @echo $(words $(ALLMODULES)) modules OK "(fetched from scm)"
492 ALLSRPMS:=$(foreach package,$(ALL),$($(package).srpm))
494 @echo $(words $(ALLSRPMS)) source rpms OK
497 ### these macro handles the DEPEND-DEVEL-RPMS and EXCLUDE-DEVEL-RPMS tags for a hiven package
498 # before building : rpm-install DEPEND-DEVEL-RPMS and rpm-uninstall EXCLUDE
499 define handle_devel_rpms_pre
500 $(if $($(1).all-devel-rpm-paths), echo "Installing for $(1)-DEPEND-DEVEL-RPMS" ; $(RPM-INSTALL-DEVEL) $($(1).all-devel-rpm-paths))
501 $(if $($(1)-EXCLUDE-DEVEL-RPMS), echo "Uninstalling for $(1)-EXCLUDE-DEVEL-RPMS" ; $(RPM-UNINSTALL-DEVEL) $($(1)-EXCLUDE-DEVEL-RPMS))
504 define handle_devel_rpms_post
505 -$(if $($(1)-DEPEND-DEVEL-RPMS), echo "Unstalling for $(1)-DEPEND-DEVEL-RPMS" ; $(RPM-UNINSTALL-DEVEL) $($(1)-DEPEND-DEVEL-RPMS))
506 $(if $($(1)-EXCLUDE-DEVEL-RPMS), "Reinstalling for $(1)-EXCLUDE-DEVEL-RPMS" ; $(YUM-INSTALL-DEVEL) $($(1)-EXCLUDE-DEVEL-RPMS) )
509 # usage: target_source_rpm package
510 define target_source_rpm
511 ifeq "$($(1)-BUILD-FROM-SRPM)" ""
512 $($(1).srpm): $($(1).specpath) .rpmmacros $($(1).tarballs)
513 mkdir -p BUILD SRPMS tmp
514 @(echo -n "XXXXXXXXXXXXXXX -- BEG SRPM $(1) (using SOURCES) " ; date)
515 $(call handle_devel_rpms_pre,$(1))
516 $($(1).rpmbuild) -bs $($(1).specpath)
517 $(call handle_devel_rpms_post,$(1))
518 @(echo -n "XXXXXXXXXXXXXXX -- END SRPM $(1) " ; date)
520 $($(1).srpm): $($(1).specpath) .rpmmacros $($(1).source)
521 mkdir -p BUILD SRPMS tmp
522 @(echo -n "XXXXXXXXXXXXXXX -- BEG SRPM $(1) (using make srpm) " ; date)
523 $(call handle_devel_rpms_pre,$(1))
524 make -C $($(1).source) srpm SPECFILE=$(HOME)/$($(1).specpath) EXPECTED_SRPM=$(notdir $($(1).srpm)) && \
525 rm -f SRPMS/$(notdir $($(1).srpm)) && \
526 ln $($(1).source)/$(notdir $($(1).srpm)) SRPMS/$(notdir $($(1).srpm))
527 $(call handle_devel_rpms_post,$(1))
528 @(echo -n "XXXXXXXXXXXXXXX -- END SRPM $(1) " ; date)
532 $(foreach package,$(ALL),$(eval $(call target_source_rpm,$(package))))
534 ### binary rpms are made from source rpm
535 ALLRPMS:=$(foreach package,$(ALL),$($(package).rpms))
536 # same as above, mention $(ALL) and not $(ALLRPMS)
538 @echo $(words $(ALLRPMS)) binary rpms OK
541 # use tmp dirs when building binary rpm so make remains idempotent
542 # otherwise SOURCES/ or SPEC gets touched again - which leads to rebuilding
543 RPM-USE-TMP-DIRS = --define "_sourcedir $(HOME)/tmp" --define "_specdir $(HOME)/tmp"
544 RPM-USE-COMPILE-DIRS = --define "_sourcedir $(HOME)/COMPILE" --define "_specdir $(HOME)/COMPILE"
546 # usage: build_binary_rpm package
547 # xxx hacky - invoke createrepo if DEPEND-FILES mentions RPMS/yumgroups.xml
548 define target_binary_rpm
549 $($(1).rpms): $($(1).srpm)
551 @(echo -n "XXXXXXXXXXXXXXX -- BEG RPM $(1) " ; date)
552 $(if $(findstring RPMS/yumgroups.xml,$($(1)-DEPEND-FILES)), $(createrepo) , )
553 $(call handle_devel_rpms_pre,$(1))
554 $($(1).rpmbuild) --rebuild $(RPM-USE-TMP-DIRS) $($(1).srpm)
555 $(call handle_devel_rpms_post,$(1))
556 @(echo -n "XXXXXXXXXXXXXXX -- END RPM $(1) " ; date)
557 # for manual use only - in case we need to investigate the results of an rpmbuild
558 $(1)-compile: $($(1).srpm)
560 @(echo -n "XXXXXXXXXXXXXXX -- BEG compile $(1) " ; date)
561 $(if $(findstring RPMS/yumgroups.xml,$($(1)-DEPEND-FILES)), $(createrepo) , )
562 $(call handle_devel_rpms_pre,$(1))
563 $($(1).rpmbuild) --recompile $(RPM-USE-TMP-DIRS) $($(1).srpm)
564 $(call handle_devel_rpms_post,$(1))
565 @(echo -n "XXXXXXXXXXXXXXX -- END compile $(1) " ; date)
569 $(foreach package,$(ALL),$(eval $(call target_binary_rpm,$(package))))
571 # e.g. make proper -> does propers rpms
572 # usage shorthand_target package
573 define target_shorthand
576 $(1)-spec: $($(1)-SPEC)
580 $(1)-tarball: $($(1).tarballs)
583 $(1)-source: $($(1).source)
584 $(1)-rpms: $($(1).rpms)
586 $(1)-srpm: $($(1).srpm)
590 $(foreach package,$(ALL),$(eval $(call target_shorthand,$(package))))
592 ### file dependencies
593 define package_depends_on_file
598 define target_dependfiles
599 $(foreach file,$($(1)-DEPEND-FILES),$(eval $(call package_depends_on_file,$(1),$(file))))
602 $(foreach package,$(ALL),$(eval $(call target_dependfiles,$(package))))
604 ### package dependencies
605 define package_depends_on_package
608 $($(1).srpm):$($(2).rpms)
611 define target_depends
612 $(foreach package,$($(1)-DEPEND-PACKAGES) $($(1).depend-devel-packages),$(eval $(call package_depends_on_package,$(1),$(package))))
615 $(foreach package,$(ALL),$(eval $(call target_depends,$(package))))
618 # usage: target_clean package
621 $(foreach module,$($(1)-MODULES),rm -rf MODULES/$(module);)
622 .PHONY: $(1)-clean-modules
623 CLEANS += $(1)-clean-modules
625 rm -rf $($(1).source)
626 .PHONY: $(1)-clean-source
627 CLEANS += $(1)-clean-source
629 rm -rf $($(1).tarballs)
630 .PHONY: $(1)-clean-tarball
631 CLEANS += $(1)-clean-tarball
633 rm -rf BUILD/$(notdir $($(1).source))
634 CLEANS += $(1)-clean-build
637 .PHONY: $(1)-clean-rpms
638 CLEANS += $(1)-clean-rpms
641 .PHONY: $(1)-clean-srpm
642 CLEANS += $(1)-clean-srpm
643 $(1)-codeclean: $(1)-clean-source $(1)-clean-tarball $(1)-clean-build $(1)-clean-rpms $(1)-clean-srpm
644 $(1)-clean: $(1)-clean-modules $(1)-codeclean
645 .PHONY: $(1)-codeclean $(1)-clean
647 rm -rf $($(1).specpath)
648 .PHONY: $(1)-clean-spec
651 .PHONY: $(1)-clean-make
652 $(1)-distclean: $(1)-distclean1 $(1)-distclean2
653 $(1)-distclean1: $(1)-clean-spec $(1)-clean-make
654 $(1)-distclean2: $(1)-clean
655 .PHONY: $(1)-distclean $(1)-distclean1 $(1)-distclean2
658 $(foreach package,$(ALL),$(eval $(call target_clean,$(package))))
666 @echo Available clean targets
669 ### brute force clean
671 rm -rf savedpldistro.mk .rpmmacros spec2make header.spec SPECS MAKE $(DISTCLEANS)
673 rm -rf MODULES SOURCES BUILD BUILDROOT RPMS SRPMS tmp
674 distclean: distclean1 distclean2
675 .PHONY: distclean1 distclean2 distclean
678 -$(RPM-UNINSTALL-DEVEL) $(ALL-DEVEL-RPMS)
681 # gather build information for the 'About' page
682 # when run from crontab, INIT_CWD not properly set (says /root ..)
683 # so, the nightly build passes BASE here
684 # also store BASE in .base for any post-processing purposes
686 @echo 'Creating myplc-release'
688 echo "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx build info" >> $@
689 $(MAKE) --no-print-directory version-build >> $@
690 echo "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx svn info" >> $@
691 $(MAKE) --no-print-directory version-tags >> $@
692 echo "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx rpm info" >> $@
693 $(MAKE) --no-print-directory version-rpms >> $@
694 @echo $(BASE) > .base
697 @echo -n 'Build build-date: ' ; date '+%Y.%m.%d'
698 @echo -n 'Build build-time: ' ; date '+%H:%M-%Z'
699 @echo -n 'Build build-hostname: ' ; hostname
700 @echo "Build build-base: $(BASE)"
701 @echo "Build planetlab-distro: $(PLDISTRO)"
702 @echo "Build planetlab-tags: $(PLDISTROTAGS)"
703 @echo -n 'Build planetlab-tagsid: ' ; fgrep '$$''Id' $(PLDISTROTAGS)
704 @echo "Build target-arch: $(HOSTARCH)"
705 @echo "Build target-distro: $(DISTRO)"
706 @echo "Build target-distroname: $(DISTRONAME)"
707 @echo "Build target-release: $(RELEASE)"
708 @echo "Build target-personality: $(PERSONALITY)"
712 VFORMAT="%30s := %s\n"
713 define print_tag_target
715 @$(if $($(1)-SVNPATH),\
716 printf $(VFORMAT) $(1)-SVNPATH "$($(1)-SVNPATH)",\
717 printf $(VFORMAT) $(1)-GITPATH "$($(1)-GITPATH)" )
720 $(foreach module,$(ALL.modules), $(eval $(call print_tag_target,$(module))))
722 version-tags: $(foreach module, $(ALL.modules), $(module)-version-tag)
724 RFORMAT="%20s :: version=%s release=%s\n"
725 define rpm_version_target
727 @printf $(RFORMAT) $($(1).rpm-name) $($(1).rpm-version) $($(1).rpm-release)
728 version-rpms: $(1)-version-rpm
731 $(foreach package,$(sort $(ALL)), $(eval $(call rpm_version_target,$(package))))
733 versions: myplc-release version-build version-tags version-rpms
734 .PHONY: versions version-build version-rpms version-tags
736 #################### package info
737 PKGKEYS := tarballs source srpm rpms rpmnames rpm-release rpm-name rpm-version rpm-subversion
738 %-pkginfo: package=$(subst -pkginfo,,$@)
740 @$(foreach key,$(PKGKEYS),echo "$(package).$(key)=$($(package).$(key))";)
742 RPMKEYS := rpm-path package
743 %-rpminfo: rpm=$(subst -rpminfo,,$@)
745 @$(foreach key,$(RPMKEYS),echo "$(rpm).$(key)=$($(rpm).$(key))";)
747 #################### various lists - designed to run with stage1=true
749 @$(foreach package,$(ALL), echo package=$(package) ref_module=$($(package).module) modules=$($(package)-MODULES) rpmnames=$($(package).rpmnames); )
752 @$(foreach module,$(ALL.modules), echo module=$(module) \
753 $(if $($(module)-SVNPATH),svnpath=$($(module)-SVNPATH),gitpath=$($(module)-GITPATH)) ; )
756 @$(foreach module,$(ALL.modules), \
757 $(if $($(module)-BRANCH),echo module=$(module) branch=$($(module)-BRANCH);))
760 @$(foreach module,$(ALL.modules), \
761 $(if $($(module)-GITPATH), \
762 $(if $($(module)-BRANCH), \
763 echo git:$(module):$($(module)-BRANCH); , \
764 echo git:$(module); ), \
765 $(if $($(module)-BRANCH), \
766 echo $(module):$($(module)-BRANCH); , \
769 info: info-packages info-modules info-branches
771 .PHONY: info info-packages info-modules info-branches module-tools
775 @echo "********** Run make in two stages:"
777 @echo "make stage1=true PLDISTRO=onelab"
778 @echo " -> extracts all spec files in SPECS/ and mk files in MAKE/"
779 @echo " as well as save PLDISTRO for subsequent runs"
781 @echo "********** Then you can use the following targets"
783 @echo " rebuilds everything"
784 @echo 'make util-vserver'
785 @echo " makes the RPMS related to util-vserver"
786 @echo " equivalent to 'make util-vserver-rpms'"
788 @echo "********** Or, vertically - step-by-step for a given package"
789 @echo 'make util-vserver-source'
790 @echo " creates source link in SOURCES/util-vserver-<version>"
791 @echo 'make util-vserver-tarball'
792 @echo " creates source tarball in SOURCES/util-vserver-<version>.<tarextension>"
793 @echo 'make util-vserver-srpm'
794 @echo " build source rpm in SRPMS/"
795 @echo 'make util-vserver-rpms'
796 @echo " build rpm(s) in RPMS/"
798 @echo "********** Or, horizontally, reach a step for all known packages"
800 @echo 'make tarballs'
804 @echo "********** Manual targets"
805 @echo "make package-compile"
806 @echo " The regular process uses rpmbuild --rebuild, that performs"
807 @echo " a compilation directory cleanup upon completion. If you need to investigate"
808 @echo " the intermediate compilation directory, use the -compile targets"
809 @echo "********** Cleaning examples"
811 @echo " removes the files made by make"
812 @echo "make distclean"
813 @echo " brute-force cleaning, removes entire directories - requires a new stage1"
814 @echo "make develclean"
815 @echo " rpm-uninstalls all devel packages installed during build"
817 @echo "make iptables-distclean"
818 @echo " deep clean for a given package"
819 @echo "make iptables-codeclean"
820 @echo " run this if you've made a local/manual change in the MODULES area for iptables"
822 @echo "make util-vserver-clean"
823 @echo " removes codebase, source, tarball, build, rpm and srpm for util-vserver"
824 @echo "make util-vserver-clean-modules"
825 @echo " and so on for source, tarball, build, rpm and srpm"
827 @echo "********** Info examples"
829 @echo " Displays the value of a given variable (here ALL)"
830 @echo " with only a single plus sign only the value is displayed"
832 @echo " is equivalent to make packages modules branches"
833 @echo " provides various info on these objects"
834 @echo "make ulogd-pkginfo"
835 @echo " Displays know attributes of a package"
836 @echo "make kernel-devel-rpminfo"
837 @echo " Displays know attributes of an rpm"
838 @echo "make stage1=true PLDISTROTAGS=planetlab-tags-4.2.mk packages modules branches module-tools"
839 @echo " Lists mentioned items - module-tools is used in modules.update"
841 @echo "********** Known pakages are"
844 #################### convenience, for debugging only
845 # make +foo : prints the value of $(foo)
846 # make ++foo : idem but verbose, i.e. foo=$(foo)
847 ++%: varname=$(subst +,,$@)
849 @echo "$(varname)=$($(varname))"
850 +%: varname=$(subst +,,$@)
852 @echo "$($(varname))"