6 # default values, tunable with command-line options
8 DEFAULT_PLDISTRO=planetlab
9 DEFAULT_PERSONALITY=linux64
10 DEFAULT_BASE="@DATE@--@PLDISTRO@-@FCDISTRO@-@PERSONALITY@"
11 DEFAULT_BUILD_SCM_URL="git://git.onelab.eu/build"
14 # default gpg path used in signing yum repo
15 DEFAULT_GPGPATH="/etc/planetlab"
16 # default email to use in gpg secring
17 DEFAULT_GPGUID="root@$( /bin/hostname )"
19 DEFAULT_TESTCONFIG="default"
20 # for passing args to run_log
23 # for publishing results, and the tests settings
25 y=$(hostname|sed -e s,inria,,)
27 if [ "$x" != "$y" ] ; then
28 DEFAULT_WEBPATH="/build/@PLDISTRO@/"
29 DEFAULT_TESTBUILDURL="http://build.onelab.eu/"
30 # this is where the buildurl is pointing towards
31 DEFAULT_WEBROOT="/build/"
32 DEFAULT_TESTMASTER="testmaster.onelab.eu"
34 DEFAULT_WEBPATH="/build/@FCDISTRO@/@PLDISTRO@/"
35 DEFAULT_TESTBUILDURL="http://build.planet-lab.org/"
36 # this is where the buildurl is pointing towards
37 DEFAULT_WEBROOT="/build/"
38 DEFAULT_TESTMASTER="manager.test.planet-lab.org"
42 # assuming vserver runs in UTC
43 DATE=$(date +'%Y.%m.%d')
45 # temporary - wrap a quick summary of suspicious stuff
46 # this is to focus on installation that go wrong
47 # use with care, a *lot* of other things can go bad as well
50 echo "******************** BEG SUMMARY"
53 # read a full log and tries to extract the interesting stuff
56 m_show_line=re.compile(".* (BEG|END) (RPM|VSERVER).*|.*'boot'.*|\* .*| \* .*|.*is not installed.*|.*PROPFIND.*|.* (BEG|END).*:run_log.*|.* Within vserver (BEG|END) .*|.* MAIN (BEG|END).*")
57 m_installing_any=re.compile('\r (Installing:[^\]]*]) ')
58 m_installing_err=re.compile('\r (Installing:[^\]]*])(..+)')
59 m_installing_end=re.compile('Installed:.*')
60 m_installing_doc1=re.compile("(.*)install-info: No such file or directory for /usr/share/info/\S+(.*)")
61 m_installing_doc2=re.compile("(.*)grep: /usr/share/info/dir: No such file or directory(.*)")
63 def summary (filename):
72 for line in f.xreadlines():
73 # first off : discard warnings related to doc
74 if m_installing_doc1.match(line):
75 (begin,end)=m_installing_doc1.match(line).groups()
77 if m_installing_doc2.match(line):
78 (begin,end)=m_installing_doc2.match(line).groups()
80 # unconditionnally show these lines
81 if m_show_line.match(line):
83 # an 'installing' line with messages afterwards : needs to be echoed
84 elif m_installing_err.match(line):
85 (installing,error)=m_installing_err.match(line).groups()
86 print '>>>',installing
89 # closing an 'installing' section
90 elif m_installing_end.match(line):
92 # any 'installing' line
93 elif m_installing_any.match(line):
95 installing=m_installing_any.match(line).group(1)
96 print '>>>',installing
98 # print lines when echo is true
100 if echo: print '>>>',line,
103 print 'Failed to analyze',filename
105 for arg in sys.argv[1:]:
108 echo "******************** END SUMMARY"
111 ### we might build on a box other than the actual web server
112 # utilities for handling the pushed material (rpms, logfiles, ...)
113 function webpublish_misses_dir () { ssh root@${WEBHOST} "bash -c \"test \! -d $1\"" ; }
114 function webpublish () { ssh root@${WEBHOST} "$@" ; }
115 function webpublish_cp_local_to_remote () { scp $1 root@${WEBHOST}:$2 ; }
116 function webpublish_cp_stdin_to_file () { ssh root@${WEBHOST} cat \> $1; }
117 function webpublish_append_stdin_to_file () { ssh root@${WEBHOST} cat \>\> $1; }
118 # provide remote dir as first argument, so any number of local files can be passed next
119 function webpublish_rsync_dir () { rsync --archive --delete $VERBOSE $2 root@${WEBHOST}:$1 ; }
120 function webpublish_rsync_files () {
122 rsync --archive $VERBOSE "$@" root@${WEBHOST}:"$remote" ;
125 # Notify recipient of failure or success, manage various stamps
128 # early stage ? - let's not create /build/@PLDISTRO@
129 if test -z "$WEBLOG" ; then
132 WEBBASE=/tmp/vbuild-early-$(date +%Y-%m-%d)
133 WEBLOG=/tmp/vbuild-early-$(date +%Y-%m-%d).log.txt
135 webpublish mkdir -p $WEBBASE ||:
136 webpublish_cp_local_to_remote $LOG $WEBLOG ||:
137 summary $LOG | webpublish_append_stdin_to_file $WEBLOG ||:
138 (echo -n "============================== $COMMAND: failure at " ; date ; \
139 webpublish tail --lines=1000 $WEBLOG) | \
140 webpublish_cp_stdin_to_file $WEBBASE.ko ||:
141 if [ -n "$MAILTO" ] ; then
143 echo "Subject: KO ${BASE} ${MAIL_SUBJECT}" ; \
144 echo "To: $MAILTO" ; \
145 echo "see build results at $WEBBASE_URL" ; \
146 echo "including full build log at $WEBBASE_URL/log.txt" ; \
147 echo "and complete test logs at $WEBBASE_URL/testlogs" ; \
148 echo "........................................" ; \
149 webpublish tail --lines=1000 $WEBLOG ) | \
155 function success () {
157 # early stage ? - let's not create /build/@PLDISTRO@
158 if test -z "$WEBLOG" ; then
161 WEBLOG=/tmp/vbuild-early-$(date +%Y-%m-%d).log.txt
163 webpublish mkdir -p $WEBBASE
164 webpublish_cp_local_to_remote $LOG $WEBLOG
165 summary $LOG | webpublish_append_stdin_to_file $WEBLOG
166 if [ -n "$DO_TEST" ] ; then
169 echo "Successfully built and tested" ; \
170 echo "see build results at $WEBBASE_URL" ; \
171 echo "including full build log at $WEBBASE_URL/log.txt" ; \
172 echo "and complete test logs at $WEBBASE_URL/testlogs" ; \
173 ) | webpublish_cp_stdin_to_file $WEBBASE.pass
174 webpublish rm -f $WEBBASE.pkg-ok $WEBBASE.ko
176 short_message="PKGOK"
178 echo "Successful package-only build, no test requested" ; \
179 echo "see build results at $WEBBASE_URL" ; \
180 echo "including full build log at $WEBBASE_URL/log.txt" ; \
181 ) | webpublish_cp_stdin_to_file $WEBBASE.pkg-ok
182 webpublish rm -f $WEBBASE.ko
184 if [ -n "$MAILTO" ] ; then
186 echo "Subject: $short_message ${BASE} ${MAIL_SUBJECT}" ; \
187 echo "To: $MAILTO" ; \
188 echo "$PLDISTRO ($BASE) build for $FCDISTRO completed on $(date)" ; \
189 echo "see build results at $WEBBASE_URL" ; \
190 echo "including full build log at $WEBBASE_URL/log.txt" ; \
191 [ -n "$DO_TEST" ] && echo "and complete test logs at $WEBBASE_URL/testlogs" ) \
194 # XXX For some reason, we haven't been getting this email for successful builds. If this sleep
195 # doesn't fix the problem, I'll remove it -- Sapan.
200 # run in the vserver - do not manage success/failure, will be done from the root ctx
205 echo -n "============================== Starting $COMMAND:build on "
211 echo "Running make IN $(pwd)"
213 # stuff our own variable settings
214 if echo $BUILD_SCM_URL | grep -q git ; then
215 MAKEVARS=("build-GITPATH=${BUILD_SCM_URL}" "${MAKEVARS[@]}")
217 MAKEVARS=("build-SVNPATH=${BUILD_SCM_URL}" "${MAKEVARS[@]}")
219 MAKEVARS=("PLDISTRO=${PLDISTRO}" "${MAKEVARS[@]}")
220 MAKEVARS=("PLDISTROTAGS=${PLDISTROTAGS}" "${MAKEVARS[@]}")
221 MAKEVARS=("PERSONALITY=${PERSONALITY}" "${MAKEVARS[@]}")
222 MAKEVARS=("MAILTO=${MAILTO}" "${MAKEVARS[@]}")
223 MAKEVARS=("WEBPATH=${WEBPATH}" "${MAKEVARS[@]}")
224 MAKEVARS=("TESTBUILDURL=${TESTBUILDURL}" "${MAKEVARS[@]}")
225 MAKEVARS=("WEBROOT=${WEBROOT}" "${MAKEVARS[@]}")
227 MAKEVARS=("BASE=${BASE}" "${MAKEVARS[@]}")
230 /build/latex-first-run.sh || :
233 make -C /build $DRY_RUN "${MAKEVARS[@]}" stage1=true
235 make -C /build $DRY_RUN "${MAKEVARS[@]}" versions
237 make -C /build $DRY_RUN "${MAKEVARS[@]}" "${MAKETARGETS[@]}"
241 # this was formerly run in the myplc-devel chroot but now is run in the root context,
242 # this is so that the .ssh config gets done manually, and once and for all
243 function run_log () {
248 echo "============================== BEG $COMMAND:run_log on $(date)"
250 ### the URL to the RPMS/<arch> location
251 # f12 now has everything in i686; try i386 first as older fedoras have both
253 for a in i386 i686 x86_64; do
254 archdir=/vservers/$BASE/build/RPMS/$a
255 if [ -d $archdir ] ; then
256 # where was that installed
257 url=$(echo $archdir | sed -e "s,/vservers/${BASE}/build,${WEBPATH}/${BASE},")
258 url=$(echo $url | sed -e "s,${WEBROOT},${TESTBUILDURL},")
263 if [ -z "$url" ] ; then
264 echo "$COMMAND: Cannot locate arch URL for testing"
269 testmaster_ssh="root@${TESTMASTER}"
271 # test directory name on test box
275 ssh -n ${testmaster_ssh} rm -rf ${testdir} ${testdir}.git
277 # check it out in the build
278 vserver $BASE exec make -C /build tests-module
280 # push it onto the testmaster - just the 'system' subdir is enough
281 rsync --verbose --archive /vservers/$BASE/build/MODULES/tests/system/ ${testmaster_ssh}:${BASE}
282 # toss the build in the bargain, so the tests don't need to mess with extracting it
283 rsync --verbose --archive /vservers/$BASE/build/MODULES/build ${testmaster_ssh}:${BASE}/
285 # invoke test on testbox - pass url and build url - so the tests can use vtest-init-vserver.sh
286 run_log_env="-p $PERSONALITY -d $PLDISTRO -f $FCDISTRO"
288 # need to proceed despite of set -e
290 # passing the build_scm_url should not be needed anymore
291 ssh 2>&1 -n ${testmaster_ssh} ${testdir}/run_log --build ${BUILD_SCM_URL} --url ${url} $run_log_env $RUN_LOG_EXTRAS $VERBOSE --all || success=
293 # gather logs in the build vserver
294 mkdir -p /vservers/$BASE/build/testlogs
295 rsync --verbose --archive ${testmaster_ssh}:$BASE/logs/ /vservers/$BASE/build/testlogs
296 # push them to the build web
297 chmod -R a+r /vservers/$BASE/build/testlogs/
298 webpublish_rsync_dir $WEBPATH/$BASE/testlogs/ /vservers/$BASE/build/testlogs/
300 echo "============================== END $COMMAND:run_log on $(date)"
302 if [ -z "$success" ] ; then
303 echo "Tests have failed - bailing out"
309 function in_root_context () {
310 rpm -q util-vserver > /dev/null
313 # this part won't work if WEBHOST does not match the local host
314 # would need to be made webpublish_* compliant
315 # but do we really need this feature anyway ?
316 function sign_node_packages () {
318 echo "Signing node packages"
322 repository=$WEBPATH/$BASE/RPMS/
323 # the rpms that need signing
325 # and the corresponding stamps
328 for package in $(find $repository/ -name '*.rpm') ; do
329 stamp=$repository/signed-stamps/$(basename $package).signed
330 # If package is newer than signature stamp
331 if [ $package -nt $stamp ] ; then
332 new_rpms="$new_rpms $package"
333 new_stamps="$new_stamps $stamp"
335 # Or than createrepo database
336 [ $package -nt $repository/repodata/repomd.xml ] && need_createrepo=true
339 if [ -n "$new_rpms" ] ; then
340 # Create a stamp once the package gets signed
341 mkdir $repository/signed-stamps 2> /dev/null
343 # Sign RPMS. setsid detaches rpm from the terminal,
344 # allowing the (hopefully blank) GPG password to be
345 # entered from stdin instead of /dev/tty.
347 --define "_signature gpg" \
348 --define "_gpg_path $GPGPATH" \
349 --define "_gpg_name $GPGUID" \
350 --resign $new_rpms && touch $new_stamps
353 # Update repository index / yum metadata.
354 if [ -n "$need_createrepo" ] ; then
355 echo "Indexing node packages after signing"
356 if [ -f $repository/yumgroups.xml ] ; then
357 createrepo --quiet -g yumgroups.xml $repository
359 createrepo --quiet $repository
364 function show_env () {
366 echo FCDISTRO=$FCDISTRO
367 echo PLDISTRO=$PLDISTRO
368 echo PERSONALITY=$PERSONALITY
370 echo BUILD_SCM_URL=$BUILD_SCM_URL
371 echo MAKEVARS="${MAKEVARS[@]}"
372 echo DRY_RUN="$DRY_RUN"
373 echo PLDISTROTAGS="$PLDISTROTAGS"
374 # this does not help, it's not yet set when we run show_env
375 #echo WEBPATH="$WEBPATH"
376 echo TESTBUILDURL="$TESTBUILDURL"
377 echo WEBHOST="$WEBHOST"
378 if in_root_context ; then
379 echo PLDISTROTAGS="$PLDISTROTAGS"
381 if [ -f /build/$PLDISTROTAGS ] ; then
382 echo "XXXXXXXXXXXXXXXXXXXX Contents of tags definition file /build/$PLDISTROTAGS"
383 cat /build/$PLDISTROTAGS
384 echo "XXXXXXXXXXXXXXXXXXXX end tags definition"
386 echo "XXXXXXXXXXXXXXXXXXXX Cannot find tags definition file /build/$PLDISTROTAGS, assuming remote pldistro"
392 function setupssh () {
396 if [ -f ${sshkey} ] ; then
397 SSHDIR=/vservers/${base}/root/.ssh
399 cp $sshkey ${SSHDIR}/thekey
401 echo " IdentityFile ~/.ssh/thekey"; \
402 echo " StrictHostKeyChecking no" ) > ${SSHDIR}/config
404 chmod 400 ${SSHDIR}/*
406 echo "WARNING : could not find provided ssh key $sshkey - ignored"
411 echo "Usage: $COMMAND [option] [var=value...] make-targets"
412 echo "Supported options"
413 echo " -f fcdistro - defaults to $DEFAULT_FCDISTRO"
414 echo " -d pldistro - defaults to $DEFAULT_PLDISTRO"
415 echo " -p personality - defaults to $DEFAULT_PERSONALITY"
416 echo " -m mailto - no default"
417 echo " -s build_scm_url - git or svn URL where to fetch the build module - defaults to $DEFAULT_BUILD_SCM_URL"
418 echo " define GIT tag or branch name appending @tagname to url"
419 echo " -t pldistrotags - defaults to \${PLDISTRO}-tags.mk"
420 echo " -b base - defaults to $DEFAULT_BASE"
421 echo " @NAME@ replaced as appropriate"
422 echo " -o base: (overwrite) do not re-create vserver, re-use base instead"
423 echo " the -f/-d/-p/-m/-s/-t options are uneffective in this case"
424 echo " -c testconfig - defaults to $DEFAULT_TESTCONFIG"
425 echo " -y {pl,pg} - passed to run_log"
426 echo " -e step - passed to run_log"
427 echo " -X : passes --lxc to run_log"
428 echo " -S : passes --vs to run_log"
429 echo " -x <run_log_args> - a hook to pass other arguments to run_log"
430 echo " -w webpath - defaults to $DEFAULT_WEBPATH"
431 echo " -W testbuildurl - defaults to $DEFAULT_TESTBUILDURL; this is also used to get the hostname where to publish builds"
432 echo " -r webroot - defaults to $DEFAULT_WEBROOT - the fs point where testbuildurl actually sits"
433 echo " -M testmaster - defaults to $DEFAULT_TESTMASTER"
434 echo " -Y - sign yum repo in webpath"
435 echo " -g gpg_path - to the gpg secring used to sign rpms. Defaults to $DEFAULT_GPGPATH"
436 echo " -u gpg_uid - email used in secring. Defaults to $DEFAULT_GPGUID"
437 echo " -K svnsshkey - specify key to use when svn+ssh:// URLs are used for SVNPATH"
438 echo " -S - do not publish source rpms"
439 echo " -B - run build only"
440 echo " -T - run test only"
441 echo " -n - dry-run: -n passed to make - vserver gets created though - no mail sent"
442 echo " -v - be verbose"
443 echo " -7 - uses weekday-@FCDISTRO@ as base"
444 echo " -i ifname - defaults to $DEFAULT_IFNAME - used to determine local IP"
445 echo " --build-branch branch - build using the branch from build module"
464 OPTS=$(getopt -o "f:d:p:m:s:t:b:o:c:y:e:XSx:w:W:r:M:Yg:u:K:SBTnv7i:P:h" -l "build-branch:" -- $@)
472 -f) FCDISTRO=$2; shift 2 ;;
473 -d) PLDISTRO=$2; shift 2 ;;
474 -p) PERSONALITY=$2; shift 2 ;;
475 -m) MAILTO=$2; shift 2 ;;
476 -s) BUILD_SCM_URL=$2; shift 2 ;;
477 -t) PLDISTROTAGS=$2; shift 2 ;;
478 -b) BASE=$2; shift 2 ;;
479 -o) OVERBASE=$2; shift 2 ;;
480 -c) TESTCONFIG="$TESTCONFIG $2"; shift 2 ;;
481 ########## passing stuff to run_log
482 # -y foo -> run_log -y foo
483 -y) RUN_LOG_EXTRAS="$RUN_LOG_EXTRAS --rspec-style $2"; shift 2 ;;
484 # -e foo -> run_log -e foo
485 -e) RUN_LOG_EXTRAS="$RUN_LOG_EXTRAS --exclude $2"; shift 2 ;;
486 # -X -> run_log --lxc
487 -X) RUN_LOG_EXTRAS="$RUN_LOG_EXTRAS --lxc"; shift;;
489 -S) RUN_LOG_EXTRAS="$RUN_LOG_EXTRAS --vs"; shift;;
490 # more general form to pass args to run_log
491 # -x foo -> run_log foo
492 -x) RUN_LOG_EXTRAS="$RUN_LOG_EXTRAS $2"; shift 2;;
494 -w) WEBPATH=$2; shift 2 ;;
495 -W) TESTBUILDURL=$2; shift 2 ;;
496 -r) WEBROOT=$2; shift 2 ;;
497 -M) TESTMASTER=$2; shift 2 ;;
498 -Y) SIGNYUMREPO=true; shift ;;
499 -g) GPGPATH=$2; shift 2 ;;
500 -u) GPGUID=$2; shift 2 ;;
501 -K) SSH_KEY=$2; shift 2 ;;
502 -S) PUBLISH_SRPMS="" ; shift ;;
503 -B) DO_TEST= ; shift ;;
504 -T) DO_BUILD= ; shift;;
505 -n) DRY_RUN="-n" ; shift ;;
506 -v) set -x ; VERBOSE="-v" ; shift ;;
507 -7) BASE="$(date +%a|tr A-Z a-z)-@FCDISTRO@" ; shift ;;
508 -i) IFNAME=$2; shift 2 ;;
509 -P) PREINSTALLED="-P $2"; shift 2;;
515 # preserve options for passing them again later, together with expanded base
518 # allow var=value stuff;
519 for target in "$@" ; do
520 # check if contains '='
521 target1=$(echo $target | sed -e s,=,,)
522 if [ "$target" = "$target1" ] ; then
523 MAKETARGETS=(${MAKETARGETS[@]} "$target")
525 MAKEVARS=(${MAKEVARS[@]} "$target")
530 [ -z "$FCDISTRO" ] && FCDISTRO=$DEFAULT_FCDISTRO
531 [ -z "$PLDISTRO" ] && PLDISTRO=$DEFAULT_PLDISTRO
532 [ -z "$PERSONALITY" ] && PERSONALITY=$DEFAULT_PERSONALITY
533 [ -z "$PLDISTROTAGS" ] && PLDISTROTAGS="${PLDISTRO}-tags.mk"
534 [ -z "$BASE" ] && BASE="$DEFAULT_BASE"
535 [ -z "$WEBPATH" ] && WEBPATH="$DEFAULT_WEBPATH"
536 [ -z "$TESTBUILDURL" ] && TESTBUILDURL="$DEFAULT_TESTBUILDURL"
537 [ -z "$WEBROOT" ] && WEBROOT="$DEFAULT_WEBROOT"
538 [ -z "$GPGPATH" ] && GPGPATH="$DEFAULT_GPGPATH"
539 [ -z "$GPGUID" ] && GPGUID="$DEFAULT_GPGUID"
540 [ -z "$IFNAME" ] && IFNAME="$DEFAULT_IFNAME"
541 [ -z "$BUILD_SCM_URL" ] && BUILD_SCM_URL="$DEFAULT_BUILD_SCM_URL"
542 [ -z "$TESTCONFIG" ] && TESTCONFIG="$DEFAULT_TESTCONFIG"
543 [ -z "$TESTMASTER" ] && TESTMASTER="$DEFAULT_TESTMASTER"
545 [ -n "$DRY_RUN" ] && MAILTO=""
547 # elaborate the extra args to be passed to run_log
548 for config in ${TESTCONFIG} ; do
549 RUN_LOG_EXTRAS="$RUN_LOG_EXTRAS --config $config"
553 if [ -n "$OVERBASE" ] ; then
554 sedargs="-e s,@DATE@,${DATE},g"
555 BASE=$(echo ${OVERBASE} | sed $sedargs)
557 sedargs="-e s,@DATE@,${DATE},g -e s,@FCDISTRO@,${FCDISTRO},g -e s,@PLDISTRO@,${PLDISTRO},g -e s,@PERSONALITY@,${PERSONALITY},g"
558 BASE=$(echo ${BASE} | sed $sedargs)
561 ### elaborate mail subject
562 if [ -n "$DO_BUILD" -a -n "$DO_TEST" ] ; then
564 elif [ -n "$DO_BUILD" ] ; then
565 MAIL_SUBJECT="pkg-only"
566 elif [ -n "$DO_TEST" ] ; then
567 MAIL_SUBJECT="test-only"
569 if [ -n "$OVERBASE" ] ; then
570 MAIL_SUBJECT="${MAIL_SUBJECT} rerun"
572 MAIL_SUBJECT="${MAIL_SUBJECT} fresh"
574 short_hostname=$(hostname | cut -d. -f1)
575 MAIL_SUBJECT="on ${short_hostname} - ${MAIL_SUBJECT}"
577 ### compute WEBHOST from TESTBUILDURL
578 # this is to avoid having to change the builds configs everywhere
579 # simplistic way to extract hostname from a URL
580 WEBHOST=$(echo "$TESTBUILDURL" | cut -d/ -f 3)
582 if ! in_root_context ; then
584 echo "==================== Within vserver BEG $(date)"
586 echo "==================== Within vserver END $(date)"
590 # we run in the root context :
591 # (*) create or check for the vserver to use
592 # (*) copy this command in the vserver
595 if [ -n "$OVERBASE" ] ; then
596 ### Re-use a vserver (finish an unfinished build..)
597 if [ ! -d /vservers/${BASE} ] ; then
598 echo $COMMAND : cannot find vserver $BASE
601 # manage LOG - beware it might be a symlink so nuke it first
602 LOG=/vservers/${BASE}.log.txt
606 echo "XXXXXXXXXX $COMMAND: using existing vserver $BASE" $(date)
607 # start in case e.g. we just rebooted
608 vserver ${BASE} start || :
609 # retrieve environment from the previous run
610 FCDISTRO=$(vserver ${BASE} exec /build/getdistroname.sh)
611 BUILD_SCM_URL=$(vserver ${BASE} exec make --no-print-directory -C /build stage1=skip +build-SVNPATH +build-GITPATH)
612 # for efficiency, crop everything in one make run
613 tmp=/tmp/${BASE}-env.sh
614 vserver ${BASE} exec make --no-print-directory -C /build stage1=skip \
615 ++PLDISTRO ++PLDISTROTAGS ++PERSONALITY ++MAILTO ++WEBPATH ++TESTBUILDURL ++WEBROOT > $tmp
619 [ -n "$SSH_KEY" ] && setupssh ${BASE} ${SSH_KEY}
620 if echo $BUILD_SCM_URL | grep -q git ; then
621 vserver $BASE exec bash -c "cd /build; git pull; make tests-clean"
623 vserver $BASE exec svn update /build
625 # make sure we refresh the tests place in case it has changed
626 rm -f /build/MODULES/tests
627 options=(${options[@]} -d $PLDISTRO -t $PLDISTROTAGS -s $BUILD_SCM_URL)
628 [ -n "$PERSONALITY" ] && options=(${options[@]} -p $PERSONALITY)
629 [ -n "$MAILTO" ] && options=(${options[@]} -m $MAILTO)
630 [ -n "$WEBPATH" ] && options=(${options[@]} -w $WEBPATH)
631 [ -n "$TESTBUILDURL" ] && options=(${options[@]} -W $TESTBUILDURL)
632 [ -n "$WEBROOT" ] && options=(${options[@]} -r $WEBROOT)
635 # create vserver: check it does not exist yet
637 while [ -d /vservers/${BASE}${i} ] ; do
638 # we name subsequent builds <base>-n<i> so the logs and builds get sorted properly
639 [ -z ${i} ] && BASE=${BASE}-n
641 if [ $i -gt 100 ] ; then
642 echo "$COMMAND: Failed to create build vserver /vservers/${BASE}${i}"
648 # manage LOG - beware it might be a symlink so nuke it first
649 LOG=/vservers/${BASE}.log.txt
653 echo "XXXXXXXXXX $COMMAND: creating vserver $BASE" $(date)
656 ### extract the whole build - much simpler
657 tmpdir=/tmp/$COMMAND-$$
658 if echo $BUILD_SCM_URL | grep -q git ; then
659 GIT_REPO=$(echo $BUILD_SCM_URL | cut -d@ -f1)
660 GIT_TAG=$(echo $BUILD_SCM_URL | cut -s -d@ -f2)
661 GIT_TAG=${GIT_TAG:-master}
662 mkdir -p $tmpdir; git archive --remote=$GIT_REPO $GIT_TAG | tar -C $tmpdir -xf -
664 svn export $BUILD_SCM_URL $tmpdir
668 ./vbuild-init-vserver.sh $VERBOSE -f ${FCDISTRO} -d ${PLDISTRO} -p ${PERSONALITY} -i ${IFNAME} ${PREINSTALLED} ${BASE}
672 # Extract build again - in the vserver
673 [ -n "$SSH_KEY" ] && setupssh ${BASE} ${SSH_KEY}
674 if echo $BUILD_SCM_URL | grep -q git ; then
675 vserver $BASE exec bash -c "git clone $GIT_REPO /build; cd /build; git checkout $GIT_TAG"
677 vserver $BASE exec svn checkout ${BUILD_SCM_URL} /build
680 # install ssh key in vserver
681 echo "XXXXXXXXXX $COMMAND: preparation of vserver $BASE done" $(date)
683 # The log inside the vserver contains everything
684 LOG2=/vservers/${BASE}/log.txt
685 (echo "==================== BEG VSERVER Transcript of vserver creation" ; \
687 echo "==================== END VSERVER Transcript of vserver creation" ; \
688 echo "xxxxxxxxxx Messing with logs, symlinking $LOG2 to $LOG" ) >> $LOG2
689 ### not too nice : nuke the former log, symlink it to the new one
690 rm $LOG; ln -s $LOG2 $LOG
695 sedargs="-e s,@DATE@,${DATE},g -e s,@FCDISTRO@,${FCDISTRO},g -e s,@PLDISTRO@,${PLDISTRO},g -e s,@PERSONALITY@,${PERSONALITY},g"
696 WEBPATH=$(echo ${WEBPATH} | sed $sedargs)
697 webpublish mkdir -p ${WEBPATH}
699 # where to store the log for web access
700 WEBBASE=${WEBPATH}/${BASE}
701 WEBLOG=${WEBPATH}/${BASE}/log.txt
702 # compute the log URL - inserted in the mail messages for convenience
703 WEBBASE_URL=$(echo $WEBBASE | sed -e "s,//,/,g" -e "s,${WEBROOT},${TESTBUILDURL},")
705 if [ -n "$DO_BUILD" ] ; then
707 # invoke this command into the build directory of the vserver
708 cp $COMMANDPATH /vservers/${BASE}/build/
710 # invoke this command in the vserver for building (-T)
711 vserver ${BASE} exec chmod +x /build/$COMMAND
712 vserver ${BASE} exec /build/$COMMAND "${options[@]}" -b "${BASE}" "${MAKEVARS[@]}" "${MAKETARGETS[@]}"
715 # publish to the web so run_log can find them
717 webpublish rm -rf $WEBPATH/$BASE
718 # guess if we've been doing any debian-related build
719 if [ ! -f /vservers/$BASE/etc/debian_version ] ; then
720 webpublish mkdir -p $WEBPATH/$BASE/{RPMS,SRPMS}
721 webpublish_rsync_dir $WEBPATH/$BASE/RPMS/ /vservers/$BASE/build/RPMS/
722 [[ -n "$PUBLISH_SRPMS" ]] && webpublish_rsync_dir $WEBPATH/$BASE/SRPMS/ /vservers/$BASE/build/SRPMS/
724 # run scanpackages so we can use apt-get on this
725 # (not needed on fedora b/c this is done by the regular build already)
726 vserver $BASE exec bash -c "(cd /build ; dpkg-scanpackages DEBIAN/ | gzip -9c > Packages.gz)"
727 webpublish mkdir -p $WEBPATH/$BASE/DEBIAN
728 webpublish_rsync_files $WEBPATH/$BASE/DEBIAN/ /vservers/$BASE/build/DEBIAN/*.deb
729 webpublish_rsync_files $WEBPATH/$BASE/ /vservers/$BASE/build/Packages.gz
731 # publish myplc-release if this exists
732 release=/vservers/$BASE/build/myplc-release
733 [ -f $release ] && webpublish_rsync_files $WEBPATH/$BASE $release
736 # create yum repo and sign packages.
737 if [ -n "$SIGNYUMREPO" ] ; then
738 # this script does not yet support signing on a remote (webhost) repo
739 sign_here=$(hostname) ; sign_web=$(webpublish hostname)
740 if [ "$hostname" = "$sign_here" ] ; then
743 echo "$COMMAND does not support signing on a remote yum repo"
744 echo "you might want to turn off the -y option, or run this on the web server box itself"
749 if [ -n "$DO_TEST" ] ; then
755 echo "==================== MAIN END $(date)"